- Joined
- Dec 21, 2006
- Messages
- 3,158
Knife # 1
Trailing point hunter or EDC. Steel is AEB-L stainless steel, heat treated by Peter's to 62HRC with cryo. Half of the spine is crowned. Handle is made from purple heart and cocobolo. Very light weight and comfortable in the hand.
OAL: 8"
Blade: 3.5"
Handle: 4.5"
Thickness: 0.062"
Steel: AEB-L 62HRC with cryo
Handle: Cocobolo and purple heart
Edge: 13° per side, 6 micron
Asking price is only $165 and comes with a custom made kydex sheath with metal belt/boot clip and free shipping anywhere in the USA! Paypal preferred (samuraistuart@yahoo.com). Knife has an unlimited life time "write your own" warranty! Thanks for looking and follow me on Instagram: stuartalandavenport
---------------------------------------------------------------------------------------------------
Knife # 2
This is a tanto (or kwaiken) made from Crucible's "Cru Forge V" high carbon vanadium steel. It has been hardened and tempered for a final hardness of ~61HRC. The blade flats are polished differently than the bevel for a contrasting look. The spine has been crowned and polished. Handle is black cotton "ito" diamond wrap over red g10, and is epoxy impregnated. The guard is formed by a "turks head" knot, and was also epoxy impregnated to prevent it from unraveling. I call it "The Black Widow"! It feels really good in the hand and is extremely sharp!
OAL: 9 1/2"
Blade: 4 3/4"
Handle: 4 3/4"
Thickness: 0.105"
Edge: 0.010", 15° per side, 6 micron
Handle: Black cotton ito over red G10, epoxied
Guard: Black Turks head knot, epoxied
Price is $300 (SOLD) A crazy good deal for such a custom blade! Included is a felt-lined custom kydex sheath as well as free shipping in the USA!!! And as always, the knife carries an unlimited lifetime "write your own" warranty. Thank you so much for taking a look! (Paypal preferred: samuraistuart@yahoo.com)
--------------------------------------------------------------------------------------------------
Knife # 3
A drop point paring knife or EDC in Sheffield O1 tool steel with a custom heat treatment including a prequench for grain refinement and toughness. The handle is a nice piece of quilted maple with a gloss finish and red G10 liners. This little guy is thin and super lightweight. Makes for fun slicing and dicing! Move over, Ginsu.
OAL: 7 3/4"
Blade: 3 1/4"
Handle: 4 1/2"
Steel: 1/16" Sheffield O1 tool steel 63HRC
Edge: 13° per side, Spyderco Fine ceramic
Handle: Quilted maple with red g10 liners
Price is $125 with kydex sheath as an EDC knife
-or-
Price is $99 with plastic edge guard (as a paring knife)
Free shipping in the USA!!! Paypal preferred (samuraistuart@yahoo.com). All knives have a lifetime unlimited "write your own" warranty. Thanks for taking a look and follow me on Instagram: stuartalandavenport
Trailing point hunter or EDC. Steel is AEB-L stainless steel, heat treated by Peter's to 62HRC with cryo. Half of the spine is crowned. Handle is made from purple heart and cocobolo. Very light weight and comfortable in the hand.
OAL: 8"
Blade: 3.5"
Handle: 4.5"
Thickness: 0.062"
Steel: AEB-L 62HRC with cryo
Handle: Cocobolo and purple heart
Edge: 13° per side, 6 micron
Asking price is only $165 and comes with a custom made kydex sheath with metal belt/boot clip and free shipping anywhere in the USA! Paypal preferred (samuraistuart@yahoo.com). Knife has an unlimited life time "write your own" warranty! Thanks for looking and follow me on Instagram: stuartalandavenport
---------------------------------------------------------------------------------------------------
Knife # 2
This is a tanto (or kwaiken) made from Crucible's "Cru Forge V" high carbon vanadium steel. It has been hardened and tempered for a final hardness of ~61HRC. The blade flats are polished differently than the bevel for a contrasting look. The spine has been crowned and polished. Handle is black cotton "ito" diamond wrap over red g10, and is epoxy impregnated. The guard is formed by a "turks head" knot, and was also epoxy impregnated to prevent it from unraveling. I call it "The Black Widow"! It feels really good in the hand and is extremely sharp!
OAL: 9 1/2"
Blade: 4 3/4"
Handle: 4 3/4"
Thickness: 0.105"
Edge: 0.010", 15° per side, 6 micron
Handle: Black cotton ito over red G10, epoxied
Guard: Black Turks head knot, epoxied
Price is $300 (SOLD) A crazy good deal for such a custom blade! Included is a felt-lined custom kydex sheath as well as free shipping in the USA!!! And as always, the knife carries an unlimited lifetime "write your own" warranty. Thank you so much for taking a look! (Paypal preferred: samuraistuart@yahoo.com)
--------------------------------------------------------------------------------------------------
Knife # 3
A drop point paring knife or EDC in Sheffield O1 tool steel with a custom heat treatment including a prequench for grain refinement and toughness. The handle is a nice piece of quilted maple with a gloss finish and red G10 liners. This little guy is thin and super lightweight. Makes for fun slicing and dicing! Move over, Ginsu.
OAL: 7 3/4"
Blade: 3 1/4"
Handle: 4 1/2"
Steel: 1/16" Sheffield O1 tool steel 63HRC
Edge: 13° per side, Spyderco Fine ceramic
Handle: Quilted maple with red g10 liners
Price is $125 with kydex sheath as an EDC knife
-or-
Price is $99 with plastic edge guard (as a paring knife)
Free shipping in the USA!!! Paypal preferred (samuraistuart@yahoo.com). All knives have a lifetime unlimited "write your own" warranty. Thanks for taking a look and follow me on Instagram: stuartalandavenport
Last edited:
