3V Drop Point Hunter in Wild Almond Burl (Withdrawn)

[Robert Erickson]

Hi guys,
I've got another new one up for sale today plus a previously posted Drop Point Hunter in 3V.

The first is a Fillet/Boning knife in S35VN steel. It has some distal taper making it a medium flexing knife. It's heat treated by Peter's to RC60. The design is plungeless full flat grind hand finished to 600 grit. The handle is coffee bag micarta from Shadetree Phenolics.

Specs:
OAL: 10.5"
Blade: 6" long, 1" wide, plungeless full flat grind, hand sanded to 600 grit.
Steel: 0.090" CPM S35VN heat treated by Peter's to RC60.
Handle: Coffee Bag micarta by Shadetree Phenolics with black micarta liners and pins.
Sheath: Handmade leather sheath.
(SOLD) Shipped CONUS, international buyers welcome shipping extra.
Post "I'll take it" here in this thread and then PM or email me for arrangements.
Paypal, Venmo, checks and money orders accepted.
Comments/Questions/Critiques welcome.
Thanks!
fullsizeoutput_6f4 by Robert Erickson, on Flickr

fullsizeoutput_6f5 by Robert Erickson, on Flickr

fullsizeoutput_6f6 by Robert Erickson, on Flickr

fullsizeoutput_6f7 by Robert Erickson, on Flickr

fullsizeoutput_6f8 by Robert Erickson, on Flickr

fullsizeoutput_6fc by Robert Erickson, on Flickr

fullsizeoutput_6ff by Robert Erickson, on Flickr

IMG_8685 by Robert Erickson, on Flickr

The second is a repost of a 3V Drop Point Hunter.

It's 0.15" 3V steel that was heat treated by Peter's to RC 60-61. The handle is some very beautiful Wild Almond Burl that was stabilized by K&G. The bolster is canvas micarta and the liners are black micarta and OD green G10. The sheath is handmade leather.
Specs:
OAL: 9.5"
Blade: 4.5" long, 1.5" wide, full flat grind down to 0.015" then convex down to 0.09" at the edge before sharpening, 600 grit cork belt satin finish,
Steel: 0.15" CPM 3V, heat treated by Peter's to RC60-61.
Handle: Beautiful stabilzed Wild Almond Burl, Black canvas micarta bolsters, black micarta pins and liners and OD green pinstripe.
Sheath: Handmade leather
$Withdrawn Shipped CONUS, international buyers welcome, shipping extra.
Paypal, Venmo, checks and money orders accepted.
Post "I'll take it" here in this thread and then PM or email me for arrangements.
It's posted elsewhere so the use of timestamps is employed.
Comments/questions/Critiques Welcome.
Thanks!

fullsizeoutput_6dc by Robert Erickson, on Flickr

fullsizeoutput_6dd by Robert Erickson, on Flickr

fullsizeoutput_6de by Robert Erickson, on Flickr

fullsizeoutput_6e0 by Robert Erickson, on Flickr

fullsizeoutput_6e1 by Robert Erickson, on Flickr

fullsizeoutput_6e2 by Robert Erickson, on Flickr

fullsizeoutput_6e3 by Robert Erickson, on Flickr

fullsizeoutput_6e4 by Robert Erickson, on Flickr

 

[TDOG1]

Love the lines on the fillet knife, very nicely done. If I didn't already have waaaay more than I needed, would be jumping on this one.

 

[Howard Donahue]

Both beautiful knives . If that Hunter is still around on Wednesday when I get paid I will take off your hands . Can't believe it's a repost .

 

[Bmurray]

I'm going to have to get you to make me a fillet knife later this year when I get the funds.

 

[Robert Erickson]

Love the lines on the fillet knife, very nicely done. If I didn't already have waaaay more than I needed, would be jumping on this one.

Thanks! Is it possible to have too many knives

Both beautiful knives . If that Hunter is still around on Wednesday when I get paid I will take off your hands . Can't believe it's a repost .

Thank you sir, the Almond Burl is very cool stuff for sure!

I'm going to have to get you to make me a fillet knife later this year when I get the funds.

Be happy to, just shoot me an email. Thanks!

 

[on_the_edge]

OK, Robert, you got me! I will take the fillet knife!

 

[Robert Erickson]

OK, Robert, you got me! I will take the fillet knife!

It's yours Chris, thanks!

 

[Jack O'Neill]

That fillet knife is outstanding Robert . I feel my fingers getting hot just thinking of grinding it .

 

[Robert Erickson]

That fillet knife is outstanding Robert . I feel my fingers getting hot just thinking of grinding it .

Thanks Jack, yea I was praying for my fingers the whole time

 

[Alan Warren Knives]

Very nicely done on both Robert. Very Cool.

 

[Robert Erickson]

Very nicely done on both Robert. Very Cool.

Thank you Alan, I appreciate it.

 

[TDOG1]

OK, Robert, you got me! I will take the fillet knife!

You sir will be getting one beautiful fillet knife. This is what a fillet knife is supposed to look like. Congratulations, enjoy and put it to good use. Catch'um up.

 

[mb>]

Really like that boning knife as well. My trigger finger was twitching!

 

[Robert Erickson]

You sir will be getting one beautiful fillet knife. This is what a fillet knife is supposed to look like. Congratulations, enjoy and put it to good use. Catch'um up.

Really like that boning knife as well. My trigger finger was twitching!

Thanks gentlemen!

 

[on_the_edge]

The fillet/boning knife is in the house. "Awesome" doesn't do it justice! If you decide to make more of these, folks would do very well to pick one up. Just sayin'.

 

[Robert Erickson]

I'm withdrawing this one and holding a raffle on Instagram instead. Check out my Instagram @ericksonknifeworks for more details.
Thanks!