4 - 10 - 14

[VCM3]

I have some more Lloyd folders to list today. I also have some fixed blades in from two Oklahoma makers Dale Atkerson & Mike Miller. I may just put those on my site so please take a look , if you'd like . But here goes on the Lloyd's .....


This is a coke bottle shadow. Nice thin light knife hafted in mammoth ivory with an inlaid & pinned ss shield. Mill relieved liners & pins are ss. Blade & spring is D2 tool steel. Deep hollow ground blade with crescent pull & cut swedge,satin finish. Pull is about a 5+ to 6+ ,it is smooth & firm. Blade can be pinched open,too. Blade centers closed and the spring is flush in all half stop positions. Knife measures 3.5" closed, 6.25" open. The blade is 2-3/4" with 2.5" of razor cutting edge. Ships in a leather padded zipper storage ace.
Shipping in the States & Paypal fee's included
$285.

 

[VCM3]

This is a Lanny's clip with a 52100 carbon ball bearing steel blade & spring. It is 4-1/8" closed,7.25" open. The blade is 3-1/8" with 2-7/8" of cutting edge. Hollow ground,crescent nail pull & a swedge. Sambar stag,nice thin knife. Firm pull like a 6+ to seven. I can pinch the blade open.Blade centers off a bit closed,no rub,spring is flush. Bolsters,pinned/inlaid shield,mill relieved liners & pins,all ss. Price is $old includes shipping in the States & Paypal fee's too. Knife will ship in a leather padded case. A great value

 

[VCM3]

John's rendition of a Tony Bose pattern "Backpocket". 4-5/8" closed,8-3/8" open. Blade is 3-3/4" with 3.5" of cutting edge. SS bolster is radiused & beveled front. Liners are ss & mill relieved. Inlaid & pinned shield & pins are also ss. Gorgeous amber dyed Sambar Stag is of the finest kind , perfectly matched & hafted . Spring is flush in all half stop positions,blade centers nicely. Smooth 5 pull. Blade & spring are 52100 carbon ball bearing steel. Hollow grind,crescent nail pull,cut swedge & satin finish. A gorgeous knife,and a great value. Knife will ship in a leather padded zipper case.
Shipping in the States & Paypal fee's included
$350.

 

[VCM3]

This is an English jack,with really fine ebony & fancy inlaid & pinned ss shield.SS bolster is "pinched". Blade & spring are D2 tool steel. Hollow grind,long pull,cut swedge & satin finish. Blade centers closed,spring is flush in all half stop positions. Nice smooth 5 pull. Knife measures 4-3/8" closed,8" open. The blade measures 3-5/8" with 3-3/8" of razor cutting edge. This knife came out really nice. It'll ship ina leather padded zipper storage case.
Shipping in the States and Paypal fee's included
$old

 

[VCM3]

Disregard prices in these links. The prices listed in this thread include shipping in the States & Paypal fee's too

Paring/Utility Now $old
http://www.vcmcustomknives.com/utility--edc.html


Carbon Fiber " 3 Finger " Now $old
http://www.vcmcustomknives.com/-3-finger.html

 

[VCM3]

John's rendition of a Tony Bose pattern "Backpocket". 4-5/8" closed,8-3/8" open. Blade is 3-5/8" with 3-3/8" of cutting edge. SS bolster is radiused & beveled front. Liners are ss & mill relieved. Inlaid & pinned shield & pins are also ss. Gorgeous creamy mammoth ivory slabs, perfectly matched & hafted . Spring is flush in all half stop positions,blade centers nicely. Smooth 5 pull. Blade & spring are 52100 carbon ball bearing steel. Hollow grind,crescent nail pull,cut swedge & satin finish. A gorgeous knife,and a great value. Knife will ship in a leather padded zipper case.
Shipping in the States & Paypal fee's included
$350.

 

[VCM3]

Disregard prices in these links. The prices listed in this thread include shipping in the States & Paypal fee's too

Paring/Utility Now $195.
http://www.vcmcustomknives.com/utility--edc.html


Carbon Fiber " 3 Finger " Now $old
http://www.vcmcustomknives.com/-3-finger.html

Carbon fiber "3 Finger" is Sold but the Utility is still available Thanks