4-12-15 John Lloyd Pre View

VCM3

Dealer / Materials Provider
Platinum Member
Feedback: +447 / =0 / -0
Joined
Oct 26, 2005
Messages
16,799
Here's a peek at some knives soon to be listed on my site

The asking prices include shipping and Paypal fee's.

All are 52100 carbon blades & springs

Top two are T.Bose pattern toothpicks,ironwood $315. & stag $400.
third down is a linen micarta trapper $285.
fourth is a mammoth ivory pocket knife $325.
Fishtail in stag w/fish shield $350.
Trapper with ebony $295.
Bottom knife is a trapper with mammoth & fancy shield $350.

Please contact me if you need to. I'll be listing these in detail,soon,Thank You,-Vince

DSCN4584_zps359abaui.jpg
 
More pics of the fourth one down!!

It is 3-3/4" closed,6.5" open Pull is a snappy six perfect for me ,ground thin like a razor. Take it with these pics & no pouch for $20. off the price I quoted above

DSCN4602_zps7midoc8o.jpg


DSCN4603_zpslzog4brg.jpg


DSCN4604_zpszksemn0s.jpg



DSCN4605_zpsye2xziqf.jpg


DSCN4606_zpsdjsplq27.jpg


DSCN4607_zpsvfxzrpsf.jpg


DSCN4608_zpsdinldsx2.jpg
 
Beautiful. Is the blade centered or off a little ? I can't tell.
 
Beautiful. Is the blade centered or off a little ? I can't tell.

It is off centered a teeny tiny bit . Nothing that bothers me. Pretty good on centered blade on that one
 
can I get a close-up and blade length on the fish-tail please

Ritt & All,this stag fishtail is 3-7/8" closed,7-3/16" opened ( measured from the fin,not the inside of the tail,if you follow that) The blade is 3.25" with 2-7.8" of edge. 52100 carbon,deep hollow ground. Blade centers closed,spring is flush in all half stop positions. Pull is about a 5. I can pinch it open.The front of the ss bolster is radiused & has that " bevel" that John does. The ss fish is pinned & inlaid.The ss pins on the stag are spun head at the back 2 and the front one by the bolster is peened & flush,nice job on that,too. The liners are ss & mill relieved. I'm out of storage cases,sorry. Price includes shipping in the States & Paypal fee's.
$330.

DSCN4625_zps2rzhidze.jpg


DSCN4627_zpsn3va0sso.jpg


DSCN4628_zpsfgx7xvdu.jpg



DSCN4629_zpsismriu3y.jpg


DSCN4630_zps1ezpkarg.jpg


DSCN4631_zps4qejaaci.jpg


DSCN4632_zpsrnqmrzgp.jpg
 
Thanks Vince! love your line up of blades and the customer service!
 
Back
Top