4-15-13 Listings

[VCM3]

Hi All,let's start off with one of my hand crafted knives.

Patch knife . *Sold*

AKA "Pacific Parer"....
But it makes a nice small EDC fixed blade,too.

It is thin stock,1/16" forged 1095 carbon with a flat grind. Blade from Dexter Russell,Russell Green River Works
Here is a little bit about that Co.
http://www.dexter-russell.com/history.asp

I put a hand rubbed finish on the blade.

Hafted in genuine India Sambar stag. 1/8" nickel silver pins.

Sheath is by Ray at Wild Boar blades. Heavy dyed & tooled leather. Belt loop is double sewn & flat so this is nice for in the pocket,too.The knife will reverse in this sheath so you can carry it on the belt righty or lefty.

OAL is 6.5" , 3.5" blade with 3" of cutting edge. This blade takes a keen razor edge.It is a little slicer.
I have not done one of these in a little while,it came out nice,see for yourself.







top


bottom


Front n back of sheath

 

[VCM3]

I call it the Riemer because that's the guy who got the first one.
Flat ground 440C ss blade,production,is razor sharp,satin finish jimped spine.Nice ground swedge.1/8" thick stock.
Stabilized buckeye burl (not dyed,natural color) ,1/8" nickel silver pins & nickel silver lanyard tube.
OAL is 9.25" with 5" blade,4-3/4" cutting edge.

Heavy leather ,dyed & fancy tooled sheath by Ray at Wild Boar Blades.Nice snug fit,knife will reverse in the sheath so it'll work for right or left belt side carry. Belt loop is double sewn.

****************Sold*****************




top


bottom





front & back of sheath