- Joined
- Jul 8, 2008
- Messages
- 1,079
Here is one of my scagel pattern {the base pattern was from Jerry Eizenga's book} 4" folders in 440c stainless steel decked out with a handsanded finish, and stabilized boxelder burl scales with stainless liners, front and rear bolsters and pins. this one is a nice solid medium size medium use utility knife, for daily cutting uses such as opening mail, trimming fingernails, peeling an apple, opening dog food bags, cutting cardboard, ect....
OAL open- 7 1/16" open and 4" closed
blade- 3 1/16" long tip to scales, .085" thick at the spine, .042" measured 1/4" behind the edge, and .007" thick at the shoulder of the edge. 11/16" wide
steel- 440c stainless steel, oil quenched and triple tempered, for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- 600 grit handsanded finish
handle- stabilized boxelder burl, stainless liners, bolsters and pins
weight - 3.20 ounces
half stop
milled inside the scales so the blade doesnt get scratched
tip is pretty dang perfectly centered, flush in all 3 positions, nice walk and talk, opens a hair harder than a victorinox tinker large blade, and still comfortable with the thumbnail
$350 shipped in the us I can accept paypal Joe357m@bresnan.net or money order. There are a couple others on my website, and can be purchased there at www.caltoncutlery.com or http://caltoncutlery.com international friends please email me for a quote for usps shipping.
1st to post "I'll take it" gets it!!! There are also a couple more similar on my website at www.caltoncutlery.comor http://caltoncutlery.com
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
OAL open- 7 1/16" open and 4" closed
blade- 3 1/16" long tip to scales, .085" thick at the spine, .042" measured 1/4" behind the edge, and .007" thick at the shoulder of the edge. 11/16" wide
steel- 440c stainless steel, oil quenched and triple tempered, for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- 600 grit handsanded finish
handle- stabilized boxelder burl, stainless liners, bolsters and pins
weight - 3.20 ounces
half stop
milled inside the scales so the blade doesnt get scratched
tip is pretty dang perfectly centered, flush in all 3 positions, nice walk and talk, opens a hair harder than a victorinox tinker large blade, and still comfortable with the thumbnail
$350 shipped in the us I can accept paypal Joe357m@bresnan.net or money order. There are a couple others on my website, and can be purchased there at www.caltoncutlery.com or http://caltoncutlery.com international friends please email me for a quote for usps shipping.
1st to post "I'll take it" gets it!!! There are also a couple more similar on my website at www.caltoncutlery.comor http://caltoncutlery.com
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
