Today I have some PM2s that haven’t made their way into my pocket. At one point I had over 25 PM2s so logically I can’t carry them all! PayPal F&F preferred.
S90V DLC with teal scales LNIB $165 —-Sold
DLT purple with DLC Cruwear LNIB $150 —-Sold
Frankenstein PM2, dipped the blade in Ferric Chloride to give it the two tone look, crowned the spine, and added a sharpening choil. Sharpened at 15 degrees on my Wicked Edge but it didn’t come out as good as usual. Shows inconsistency near the sharpening choil as shown in the video. Functionally fine, and plenty sharp. Has only cut paper to test the edge. Somewhat stiff action but fires open with no blade play. Wearing factory gray (maxamet) scales — asking $125 comes with a Cruwear box possibly not the original box since it’s such a mix and match knife.
Maxamet factory second wearing factory teal scales. Has never cut anything or been carried but has obviously been taken apart for the scale swap. Blade is as off center as you can get, but it does not touch the liner and functions fine. Please see video below. Asking $110
RGT black micarta scales have been installed and oiled, still in great shape. $30 or $20 with any knife purchase.
Please feel free to reach out with any questions.
Only trade I am interested in would be a Benchmade Bailout or an Alliance Design EZE 2.0
S90V DLC with teal scales LNIB $165 —-Sold
DLT purple with DLC Cruwear LNIB $150 —-Sold
Frankenstein PM2, dipped the blade in Ferric Chloride to give it the two tone look, crowned the spine, and added a sharpening choil. Sharpened at 15 degrees on my Wicked Edge but it didn’t come out as good as usual. Shows inconsistency near the sharpening choil as shown in the video. Functionally fine, and plenty sharp. Has only cut paper to test the edge. Somewhat stiff action but fires open with no blade play. Wearing factory gray (maxamet) scales — asking $125 comes with a Cruwear box possibly not the original box since it’s such a mix and match knife.
Maxamet factory second wearing factory teal scales. Has never cut anything or been carried but has obviously been taken apart for the scale swap. Blade is as off center as you can get, but it does not touch the liner and functions fine. Please see video below. Asking $110
RGT black micarta scales have been installed and oiled, still in great shape. $30 or $20 with any knife purchase.
Please feel free to reach out with any questions.
Only trade I am interested in would be a Benchmade Bailout or an Alliance Design EZE 2.0
Attachments
Last edited:
