5 Working Knives

[KHall]

For your consideration are five knives I just finished that are ready to go to work. Four of the blade are W2 and one is 1095 (see notes below), they were each differentially heat treated (clay coated spine) and tempered to a Rockwell hardness of around 60. To keep production cost down I did not polish out the Hamon line, but only hand sanded the blades to 220 grit.

I will ship international, but buyer pays the additional cost.

PayPal and email khall@hallenergyconsulting.com

Thanks for stopping by,
Ken

Knife 1
Steel – W2
Knife dimensions:
Overall length – 8 1/8 inches
Blade length – 4 inches
Blade width – 1 1/4 inches
Handle – Micarta
Pin – Brass Corby Bolts
Includes Sheath to be made
Price - $210 + $15 for shipping and insurance

Knife 2
Steel – W2
Knife dimensions:
Overall length – 8 5/8 inches
Blade length – 4 1/2 inches
Blade width – 1 3/8 inches
Handle – Carbon Fiber, Red Paper Spacers
Pin – Stainless Corby Bolts
The clip is not sharp
Includes Sheath to be made
Price - $225 + $15 for shipping and insurance

Knife 3
Steel – W2
Knife dimensions:
Overall length –10 inches
Blade length – 5 1/2 inches
Blade width – 1 1/2 inches
Handle – G10
Pin – Stainless Corby Bolts
Includes Sheath to be made
Price - $240 + $15 for shipping and insurance

Knife 4 - Sold
Steel – W2
Knife dimensions:
Overall length – 10 3/4 inches
Blade length – 6 1/4 inches
Blade width – 2 inches
Blade thickness – 0.11 inches
Handle – Stabilized Babinga
Pin – Stainless Corby Bolts
No Sheath

Knife 5 - Sold
Steel – 1095
Knife dimensions:
Overall length – 11 1/4 inches
Blade length – 6 5/8 inches
Blade width – 2 inches
Blade thickness – 0.12 inches
Handle – Stabilized Curly Maple
Pin – Stainless Corby Bolts
No Sheath

 

[mycough]

Personal message sent on 5. These are all nice though. Russ

 

[KHall]

#5 is sold pending funds.

Ken

 

[TLA]

Ken, if it's still available I will take:

Knife 4
Steel – W2
Knife dimensions:
Overall length – 10 3/4 inches
Blade length – 6 1/4 inches
Blade width – 2 inches
Blade thickness – 0.11 inches
Handle – Stabilized Babinga
Pin – Stainless Corby Bolts
No Sheath
Price - $200 + $15 for shipping and insurance

 

[TLA]

Pay Pal has been sent for #4