- Joined
- Jul 8, 2008
- Messages
- 1,079
here is a samller sized chopper/pack knife!! This is slightly smaller than the one I carry on my hunting pack. Its large enough to do some real work to get you out of a bind, yet not so large and heavy as to be left back at the truck.
OAL- 14 1/4"
blade- 8 3/4" long, .210" thick, 1 7/8" wide
weight-1 pound 13 ounces with sheath
steel- Aldo's 5160, Forged, with in-house differential heat treatment which includes double normalize, double anneal, double edge quench, and triple draw, for a great performing blade, that holds a great edge, and yet is easy to sharpen!
grind- a light convex grind, sharpened on a smiths diamond hone with micro bevels, to an agressive razor edge
finish-with a 400 grit machine finish under a scotchbrite belt finish, with light hamon, for a nice easy to maintain working finish
handle- grandmillo with brass pins and thong tube
guard- no guard on this one, but the handle is contoured to steer your hand away from the cutting edge
sheath- 11oz leather, hand stitched, clean, hot-waxed, loop is sized for a 2" belt. personally I keep a blade like this one strapped to my pack instead of on my belt, the belt loop is a nice place to attach a strap though, and I left enough leather at the end of the sheath to punch you own custom hole for a lower attachment point.
I cut a 2x4 in half twice, and the edge would still shave. it also passed an edge flex test, and a nail test {where you clamp the blade edge up in a vise and place a common nail across the edge and hammer the nail until it is cut halfway through} and put about half my wieght {210 lbs}to flex the blade sideways in a vise to check for toughness.
$240 plus $20 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
1st to post "I'll take it" gets it!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
OAL- 14 1/4"
blade- 8 3/4" long, .210" thick, 1 7/8" wide
weight-1 pound 13 ounces with sheath
steel- Aldo's 5160, Forged, with in-house differential heat treatment which includes double normalize, double anneal, double edge quench, and triple draw, for a great performing blade, that holds a great edge, and yet is easy to sharpen!
grind- a light convex grind, sharpened on a smiths diamond hone with micro bevels, to an agressive razor edge
finish-with a 400 grit machine finish under a scotchbrite belt finish, with light hamon, for a nice easy to maintain working finish
handle- grandmillo with brass pins and thong tube
guard- no guard on this one, but the handle is contoured to steer your hand away from the cutting edge
sheath- 11oz leather, hand stitched, clean, hot-waxed, loop is sized for a 2" belt. personally I keep a blade like this one strapped to my pack instead of on my belt, the belt loop is a nice place to attach a strap though, and I left enough leather at the end of the sheath to punch you own custom hole for a lower attachment point.
I cut a 2x4 in half twice, and the edge would still shave. it also passed an edge flex test, and a nail test {where you clamp the blade edge up in a vise and place a common nail across the edge and hammer the nail until it is cut halfway through} and put about half my wieght {210 lbs}to flex the blade sideways in a vise to check for toughness.
$240 plus $20 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
1st to post "I'll take it" gets it!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
