- Joined
- May 25, 2015
- Messages
- 89
Brand new, never used. One of many to come, I hope.
The blade is made from 52100, it has a 600grit satin finish, a copper pin, spacer, and ebony handle. Stippled pin ends and spacer face. The spacer is very tightly recessed into the neck, and all the joints are sealed with epoxy.
The POB is about 70mm out from the spacer, even with the counter weights in handle. Clearance is 35mm, the neck is 22mm wide and 22mm long. The edge length is 335mm.
The blade is 2.5mm thick at the neck, 1.76mm at 16.5cm, and .88mm 1cm from the tip, and roughly 63hrc. The edge is ground to zero and the blade is lightly convexed. The spine and choil have been rounded and polished. The handle tapers from 28.2mmx20.4mm to 24.4mmx17.0mm, and is 125mm long. The overall weight is 291g.
Asking$350 $300 USD shipping included
The blade is made from 52100, it has a 600grit satin finish, a copper pin, spacer, and ebony handle. Stippled pin ends and spacer face. The spacer is very tightly recessed into the neck, and all the joints are sealed with epoxy.
The POB is about 70mm out from the spacer, even with the counter weights in handle. Clearance is 35mm, the neck is 22mm wide and 22mm long. The edge length is 335mm.
The blade is 2.5mm thick at the neck, 1.76mm at 16.5cm, and .88mm 1cm from the tip, and roughly 63hrc. The edge is ground to zero and the blade is lightly convexed. The spine and choil have been rounded and polished. The handle tapers from 28.2mmx20.4mm to 24.4mmx17.0mm, and is 125mm long. The overall weight is 291g.
Asking
Attachments
Last edited:
