1080/15N20 with African Blackwood handle and nickel-silver spacer.
Blade height at heel: 1 3/4" (45mm)
Spine thickness at bolster: 0.103" (2.62mm) tapering to 0.072" (1.83mm) at drop
Handle length: 5" (127mm)
Handle width: 0.972" (24.7mm) at heel tapering to 0.768" (19.5mm) at bolster
Handle height: 1.050" (26.7mm) with a slight taper towards the bolster.
Blade was forged and went through 3 normalizing cycles; quenched, and tempered to ~ 61HRC by me.
$250 USD SOLD
Blade height at heel: 1 3/4" (45mm)
Spine thickness at bolster: 0.103" (2.62mm) tapering to 0.072" (1.83mm) at drop
Handle length: 5" (127mm)
Handle width: 0.972" (24.7mm) at heel tapering to 0.768" (19.5mm) at bolster
Handle height: 1.050" (26.7mm) with a slight taper towards the bolster.
Blade was forged and went through 3 normalizing cycles; quenched, and tempered to ~ 61HRC by me.
Last edited:
