3/16" 1095 Blued & Lightly Buffed for a slight antique look
This was clay quench, so slight discoloration from the bluing is visible because of the hamon. I love the contrast between the blade and the stainless guard.
Edge hardened to 61-62rc
6 1/4" from tip to guard.
11" OAL
416 Stainless Guard, leather spacer, & Honduras Rosewood handle. (Because of the angle I made on the handle, I ground a little too far on the top of the butt. So the slot hole was expose. I filled with crushed turquoise, dust from the rosewood, and epoxy. Gave it a little more character, and has not changed its durability or performance.) See pic #4.
All of this held together with epoxy and stainless corby bolt.
Comes with studded & tooled leather sheath.
Paypal to sarabonifas@yahoo.com
Contact me at colu41 @ gmail
First "Ill Take It" its yours.
This was clay quench, so slight discoloration from the bluing is visible because of the hamon. I love the contrast between the blade and the stainless guard.
Edge hardened to 61-62rc
6 1/4" from tip to guard.
11" OAL
416 Stainless Guard, leather spacer, & Honduras Rosewood handle. (Because of the angle I made on the handle, I ground a little too far on the top of the butt. So the slot hole was expose. I filled with crushed turquoise, dust from the rosewood, and epoxy. Gave it a little more character, and has not changed its durability or performance.) See pic #4.
All of this held together with epoxy and stainless corby bolt.
Comes with studded & tooled leather sheath.
Paypal to sarabonifas@yahoo.com
Contact me at colu41 @ gmail
First "Ill Take It" its yours.
3/16" 1095
HT 61-62rc
4 1/8" Cutting Edge
8 1/4" OAL
My first attempted Hamon. Turned out decent I think.
Handles are Katalox, with red G10 liners. Held together with Stainless corby fasteners.
There is a slight gap in one of the scales. You can see it near the plunge line in pic #3. For that I will be selling it at a discounted price.
Asking SOLD shipped to the 50 states.
First "I'll Take It" its yours.
Paypal to Sarabonifas@yahoo.com
Contact me at colu41 @ gmail
HT 61-62rc
4 1/8" Cutting Edge
8 1/4" OAL
My first attempted Hamon. Turned out decent I think.
Handles are Katalox, with red G10 liners. Held together with Stainless corby fasteners.
There is a slight gap in one of the scales. You can see it near the plunge line in pic #3. For that I will be selling it at a discounted price.
Asking SOLD shipped to the 50 states.
First "I'll Take It" its yours.
Paypal to Sarabonifas@yahoo.com
Contact me at colu41 @ gmail
Last edited:
