6 Ferrum Forge's (3 unique, NGFR, Ferox, Mordax, Mako, Fortis) and a Will Moon Mk8

Status
Not open for further replies.
J

Joey Viner

Feedback: +136 / =0 / -0
Joined
Jun 30, 2014
Messages
376
My cheap prices include fully-insured USPS Priority shipping and any Paypal fees (but please pay with "Friends & Family" if you can to avoid them, thanks)
NO TRADES, sorry

All these knives are centered and have great action. I love them all and am sad to see them go but alas I must (funds, grails, the usual). I highly doubt you'll be disappointed by any of these.





Ferrum Forge Ferox, unique customized 1-off
CPM-4V steel blade, with acid design
Bronze anodized Ti handle and screws
Blue anodized Ti spacers and pocket clip
Other customizations (done by Elliot by the way): Has a shortened/smaller flipper tab, and two finger grooves instead of one
and the usual: thrust bearings, HRD, integrated lock bar overtravel stop
Has had a couple owners but all took care of it, only issue I see is a scratch on the pocket clip, otherwise seems perfect. Was originally $650
$415 *moved to an auction*:
http://www.ebay.com/itm/331596927247







Ferrum Forge Mordax
Was bought at Blade show 2015 by last owner and then immediately sold to me. Has the hexagonal milling pattern on handle. Bronze (or Gray? not sure what color you'd call that ano, lol) with blue in the pattern, pivot screw, pocket clip, and spacers.
N690 two-tone blade, acid wash + satin flats
This thing is super smooth with the new ceramic HRD and ceramic bearings. Great action. I was told by the buyer this was the best flipping one at the show that he felt.
Carried once or twice, it's still "Like new", has one very light hairline scratch on the satin part of blade (even lighter than it looks in the pics)
Note: the dog tag on the pouch incorrectly says "Mako", I guess they didn't have "Mordax" ones at the show yet? It's how it came. Table price was $600, seems to sell for the same at knife sites
$575 $550 *moved to an auction*:
http://www.ebay.com/itm/331596920764
 
Last edited:
pics of all the below are still here (till I eventually remove them): http://s44.photobucket.com/user/JoeyViner/library/Knives/FFsMoon?sort=9&page=1

Ferrum Forge NGFR (stands for "Never Go Full Retard" lol http://www.imdb.com/title/tt0942385/)
only 10 made, all unique, this is the only one made with carbon fiber
Marble carbon fiber scale
timascus pivot
two-tone acid wash + satin flats, 4V steel blade
Ti handle, orange peel finish, ano'd bolster
milled Ti clip
ceramic bearings
Hoback rolling detent
steel lock insert
was released exclusive to BladeHQ around Sept 2014 for $1300, has had several owners since but everyone seems to've taken great care of it
http://www.bladehq.com/item--Ferrum-Forge-Custom-NGFR-Flipper--25524
absolutely great knife, great action, seems to be "like new" condition to me, I can't find anything wrong with it
$750 *SOLD*


Ferrum Forge Ferox Bowie, unique customized 1-off
Customized by Elliot including a bowie/clip point grind and shortened/smaller flipper tab
CPM-4V steel blade, two-tone acid wash + satin flats
milled and bronze ano'd Ti handle, screws, pocket clip
HRD, overtravel stop, bearings, steel lockbar insert, hidden screws on pocket clip
Had one other owner, it's only been carried a few times, barely used, practically "like new". Only mark I see is a tiny one near the blade spine, last owner said it came like that from the maker and said Elliot said it's an occasional side effect from the acid wash. Was originally $695
$560 $550 *WITHDRAWN*


Ferrum Forge/Gavko Mako
This is the Ferrum Forge-style version with the bigger finger choil, and the "T" pattern for the grooves in the handle
Acid washed 20CV blade
Bronze/tan/gold Ti handle (sorry for the horrible lighting in the pics... the correct color is more of a tan, like the first outside picture... it's not yellow like some of them show)
Greenish color Ti hardware (pivot screw, spacers, pocket clip)
Has the new ceramic HRD, ceramic bearings, overtravel stop, lockbar insert
Flips great, can even be opened with the thumbhole with your finger or thumb if you like
Practically new, only carried/used once, no marks. Sells for $600-700
$575 *SOLD*


Ferrum Forge Fortis A
This is the model A with the three straight grooves/fullers in the handle
DuraTech 20CV stonewash blade that's shiny/polished almost like a clear coat
Ti handle, stonewashed and looks a little dark like it was acid washed or ano'd too
Bronze ano hardware (pivot screw, spacers, pocket clip)
Like new, only carried a couple times, barely used. Only selling it because I have a second, more expensive one. Was originally $550
$440 *SOLD*


Will Moon Mk8
Mark 8 with acid stonewash CPM-154 blade, 59 HRC
stonewash handle
Bronze ano screws
Black G10 pocket clip and backspacer
tungsten carbide lockface, integrated overtravel stop, thrust bearings
very light, the frame is skeletonized, flips nice, smooth & sleek handle, absolutely great EDC
carried once or twice, still seems like new, I think the tip of the handle brushed up against my keys once but it's a barely-noticeable scrape due to the stonewash anyway
sells for like $600-800 I believe
$560 *SOLD*



And here's a dark-lit pic of them all to compare the colors/sizes:

 
Last edited:
dougland89 said:
I will take the fortis. How do i contact you? Paypal ready
Click to expand...

If you click my name on here it should give an option to Private Message or email? Unless free members can't do that... in which case, post your email address and then you can edit/delete the post after I reply if you want
 
Status
Not open for further replies.
Back
Top