timos-
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 22, 2012
- Messages
- 2,164
Blade Steel: AEB-L to hardness of RC 60 by Peters Heat Treating.
Handle: Stabilized Madrone Burl with .015 black g10 liners
Overall Length: 7" with a 3" blade.
Thickness: .110 at thickest
This knife has close to a zero grind. There is only a few thousandths behind the edge. Ive had this same design doing paring work in the kitchen for the last 6 months and is still shaving hair. It is real delicate at the tip too. This handle shape fits a small to medium size hand great, otherwise its more of what I call a 3 finger handle at only 4" long. Ive got some 1/8" thick stabilized madrone burl from Burl Source on top of some black g10 liners. The wood cleaned up with a subtle burl figure at 1500 grit. This knife will slice and slice and slice. The bevels have been ground on a 36" Radius platen. They are slightly hollow/ almost flat. Others might refer to this size knife as a pocket fixed blade.
I can make a pouch style sheath out of Wickett & Craig 10 oz tooling leather for an additional 30$. My sheaths are durable and functional, they will not win any beauty contests. Please specify left or right and give an additional 7-10 days for delivery.
Asking 110$ or 140$ w/sheath plus S&H
The smudges on blade of last picture have been cleaned up.
Handle: Stabilized Madrone Burl with .015 black g10 liners
Overall Length: 7" with a 3" blade.
Thickness: .110 at thickest
This knife has close to a zero grind. There is only a few thousandths behind the edge. Ive had this same design doing paring work in the kitchen for the last 6 months and is still shaving hair. It is real delicate at the tip too. This handle shape fits a small to medium size hand great, otherwise its more of what I call a 3 finger handle at only 4" long. Ive got some 1/8" thick stabilized madrone burl from Burl Source on top of some black g10 liners. The wood cleaned up with a subtle burl figure at 1500 grit. This knife will slice and slice and slice. The bevels have been ground on a 36" Radius platen. They are slightly hollow/ almost flat. Others might refer to this size knife as a pocket fixed blade.
I can make a pouch style sheath out of Wickett & Craig 10 oz tooling leather for an additional 30$. My sheaths are durable and functional, they will not win any beauty contests. Please specify left or right and give an additional 7-10 days for delivery.
Asking 110$ or 140$ w/sheath plus S&H
The smudges on blade of last picture have been cleaned up.
Last edited:
