- Joined
- Mar 28, 2001
- Messages
- 4,609
These are for sale only, not looking for trades, need to clear some room.
Prices include USPS Priority to USA customers. No International unless we've dealt before and shipping will need to be determined based on location. No 3rd party re-shippers either please.
Happy to send additional pictures or discuss package prices for multiple purchases but first commitment to buy gets it. If there are specifics you want to know ask ahead of time. Post, PM or email is fine but if you email me please include your BladeForums alias if you email, chad@pirtlemade.com.
Payment via Paypal, Square or Venmo, whatever buyer prefers.
Thanks for looking!
$57 each shipped ***SOLD*** or if you purchase any four of the Spyderco's in this post I will throw one in at no charge.
If you are not familiar with them, they are Titanium bit drivers with a ball on the end that spins on bearings. They also include a 6 piece Wiha bit set. All of the contents fir neatly in a plastic test tube for storage. Neat little package.
Mantra 3: I removed the flipper on this one and added a nicely rounded finger/sharpening choil. Removal was done barehanded at low speed on my KMG with plenty of water. Finger flicks like a rocket and very smooth. Blade is centered and only a barely perceptible bit of movement in the blade when locked, would likely work itself out with use. Flicked and modded but I didn't carry or use it. --$100 $90 Shipped ***SOLD***
Shaman M4/DLC: New and unused, amazing knife and I'd love to keep it but I have a lot of Shamans and don't carry them as much as other models so I need to cut some loose. Perfectly centered, excellent QC and a real looker. --$260 Shipped ***SOLD***
Caribbean: New and unused aside from me dying the scales using commercial grade dark brown leather dye, leaving them a nice warm brown. After dying they were scrubbed with denatured alcohol to ensure they do not bleed or fade further. I also broke the sharp internal edges of the G-10 with 800 grit paper while it was apart. Perfect all around on QC and excellent lockup but the stop pin will rattle a tiny bit if you shake it when the knife is closed. I can shim it for the buyer before shipping if desired. -- ***SOLD***$130 Shipped ***SOLD***
Sage 5 FRN: New and unused other than a little flicking. The action on this knife is truly unbelievable, better than many bearing knives. Perfectly centered and rock solid lockup. Pains me to sell it. --$95 Shipped ***SOLD***
Shaman Rex-45/Diamondwood: This knife was discussed heavily in the Spyderco forum thread on this model if you want more info. The Diamondwood scales were dyed with black professional leather dye, then scrubbed with Denatured Alcohol to ensure the color does not bleed. I also broke the sharp internal edges of the scales with 800 grit paper. The end result is a knife that feels great in hand and has a much warmer and more subtle look that's not as garish is normal Diamondwood. It arrived to me with minor chip outs around the show side lanyard hole. I have seen this in a number of other people's folders to varying degree and think someone is trueing the hole with a drill bit at the factory and not backing up the show side. I didn't even notice them until I took pictures, even after all the work I did. Rock solid lockup and is in unused condition. --$215 ***SOLD***
Police 4 K390: New and unused,blade is centered and lockup is solid. These are sure to sky rocket in value now that supply is drying up. I bought it to play with K390 but ended up with a PM3 in K390 I use as an EDC. -- $190
Native Chief: New and unused. One of the best knives Spyderco has put out in years. Smooth action, great grind, great weight to size ratio, love everything about it. This one is a spare so cutting it loose. Excellent QC, centered and solid lockup. -- ***SOLD***$125 Shipped ***SOLD***
Delica: ZDP-189, never carried or used, centered, tiny bit of vertical play that could go away with use or adjustment --$75 Shipped ***SOLD***
Thanks for looking!
Prices include USPS Priority to USA customers. No International unless we've dealt before and shipping will need to be determined based on location. No 3rd party re-shippers either please.
Happy to send additional pictures or discuss package prices for multiple purchases but first commitment to buy gets it. If there are specifics you want to know ask ahead of time. Post, PM or email is fine but if you email me please include your BladeForums alias if you email, chad@pirtlemade.com.
Payment via Paypal, Square or Venmo, whatever buyer prefers.
Thanks for looking!
**Bonus Opportunity**
I have two brand new Knife Tool 4.0's by Audacious Concept in Finland that are for sale at ***SOLD*** If you are not familiar with them, they are Titanium bit drivers with a ball on the end that spins on bearings. They also include a 6 piece Wiha bit set. All of the contents fir neatly in a plastic test tube for storage. Neat little package.
Mantra 3: I removed the flipper on this one and added a nicely rounded finger/sharpening choil. Removal was done barehanded at low speed on my KMG with plenty of water. Finger flicks like a rocket and very smooth. Blade is centered and only a barely perceptible bit of movement in the blade when locked, would likely work itself out with use. Flicked and modded but I didn't carry or use it. --
Shaman M4/DLC: New and unused, amazing knife and I'd love to keep it but I have a lot of Shamans and don't carry them as much as other models so I need to cut some loose. Perfectly centered, excellent QC and a real looker. --
Caribbean: New and unused aside from me dying the scales using commercial grade dark brown leather dye, leaving them a nice warm brown. After dying they were scrubbed with denatured alcohol to ensure they do not bleed or fade further. I also broke the sharp internal edges of the G-10 with 800 grit paper while it was apart. Perfect all around on QC and excellent lockup but the stop pin will rattle a tiny bit if you shake it when the knife is closed. I can shim it for the buyer before shipping if desired. -- ***SOLD***
Sage 5 FRN: New and unused other than a little flicking. The action on this knife is truly unbelievable, better than many bearing knives. Perfectly centered and rock solid lockup. Pains me to sell it. --
Shaman Rex-45/Diamondwood: This knife was discussed heavily in the Spyderco forum thread on this model if you want more info. The Diamondwood scales were dyed with black professional leather dye, then scrubbed with Denatured Alcohol to ensure the color does not bleed. I also broke the sharp internal edges of the scales with 800 grit paper. The end result is a knife that feels great in hand and has a much warmer and more subtle look that's not as garish is normal Diamondwood. It arrived to me with minor chip outs around the show side lanyard hole. I have seen this in a number of other people's folders to varying degree and think someone is trueing the hole with a drill bit at the factory and not backing up the show side. I didn't even notice them until I took pictures, even after all the work I did. Rock solid lockup and is in unused condition. --
Police 4 K390: New and unused,blade is centered and lockup is solid. These are sure to sky rocket in value now that supply is drying up. I bought it to play with K390 but ended up with a PM3 in K390 I use as an EDC. -- $190
Native Chief: New and unused. One of the best knives Spyderco has put out in years. Smooth action, great grind, great weight to size ratio, love everything about it. This one is a spare so cutting it loose. Excellent QC, centered and solid lockup. -- ***SOLD***
Delica: ZDP-189, never carried or used, centered, tiny bit of vertical play that could go away with use or adjustment --
Thanks for looking!
Attachments
Last edited:
