- Joined
- Jan 1, 2011
- Messages
- 1,798
I have a few EDC knives available. Questions and comments are welcome and appreciated.
Thanks
Jess
The first one is a Derry EDC model with 1/8" 80crv2 carbon steel at 61 HRC. 80crv2 is a tough steel that takes a nice edge. It's my go-to carbon steel. The blade has a full height flat grind with machine finish. The handle is stabilized Purple Heart. It has a great Merlot color. The hardware is stainless steel. This one includes a right hand leather sheath.
OAL: 6-7/8" Blade: 3"
$145 Shipped in the US


The second one is another Derry EDC with 1/8" 80crv2 carbon steel at 61HRC. The blade has a full flat grind with machine finish. Natural linen micarta makes up the handle on this one. The handle hardware is stainless. This one also includes a RH leather sheath.
OAL: 6-7/8" Blade: 3"
$145 Shipped in the US



The third one is one of my Down model skinners. This knife is designed to be a small skinner that can be used with a 3-finger grip, but it makes a great EDC also. The blade is 1/8" 80crv2 carbon steel heat treated to 61 HRC. The grind is a very shallow hollow (20"). The handle is a nice piece of stabilized Philippine mahogany. It has a nice subtle chatoyance. This one includes a RH leather sheath.
OAL: 6-5/8" Blade: 3"
$150 Shipped in the US



Thanks
Jess
The first one is a Derry EDC model with 1/8" 80crv2 carbon steel at 61 HRC. 80crv2 is a tough steel that takes a nice edge. It's my go-to carbon steel. The blade has a full height flat grind with machine finish. The handle is stabilized Purple Heart. It has a great Merlot color. The hardware is stainless steel. This one includes a right hand leather sheath.
OAL: 6-7/8" Blade: 3"
$145 Shipped in the US


The second one is another Derry EDC with 1/8" 80crv2 carbon steel at 61HRC. The blade has a full flat grind with machine finish. Natural linen micarta makes up the handle on this one. The handle hardware is stainless. This one also includes a RH leather sheath.
OAL: 6-7/8" Blade: 3"
$145 Shipped in the US



The third one is one of my Down model skinners. This knife is designed to be a small skinner that can be used with a 3-finger grip, but it makes a great EDC also. The blade is 1/8" 80crv2 carbon steel heat treated to 61 HRC. The grind is a very shallow hollow (20"). The handle is a nice piece of stabilized Philippine mahogany. It has a nice subtle chatoyance. This one includes a RH leather sheath.
OAL: 6-5/8" Blade: 3"
$150 Shipped in the US


