- Joined
- Oct 16, 2010
- Messages
- 5,656
Gentlemen:
For your consideration is this hidden tang hunter in 80CRV2/Cottonwood. This is a larger version hunter - 9" OAL - the 4 1/2" blade was deeply hollow ground on a 10" wheel to .020" with 25 degree secondary bevels. The spine is rounded with checkered thumb serrations and rounded choil. Gorgeous stabilized Cottonwood with tight grain, lots of figure, and chatoyance. The hidden tang extends 2/3 of the way into the handle and is set with G/flex marine grade epoxy. I hope you like it! The first "I'll take it," PM, or email gets it. $$$$ delivered CONUS. PayPal preferred to tsteingass@yahoo.com. Thanks for viewing - all comments are appreciated.
V/R,
TK
.240" 80CRV2 stock
HT to Rc 60-61
9" OAL
4 1/2" Hollow ground blade
400 grit satin finish blade
Stabilized Cottonwood
Stainless fittings
Soldered guard
Black G-10 spacer
Checkered thumb serrations
Rounded spine & choil
RH Wicket & Craig leather sheath
For your consideration is this hidden tang hunter in 80CRV2/Cottonwood. This is a larger version hunter - 9" OAL - the 4 1/2" blade was deeply hollow ground on a 10" wheel to .020" with 25 degree secondary bevels. The spine is rounded with checkered thumb serrations and rounded choil. Gorgeous stabilized Cottonwood with tight grain, lots of figure, and chatoyance. The hidden tang extends 2/3 of the way into the handle and is set with G/flex marine grade epoxy. I hope you like it! The first "I'll take it," PM, or email gets it. $$$$ delivered CONUS. PayPal preferred to tsteingass@yahoo.com. Thanks for viewing - all comments are appreciated.
V/R,
TK
.240" 80CRV2 stock
HT to Rc 60-61
9" OAL
4 1/2" Hollow ground blade
400 grit satin finish blade
Stabilized Cottonwood
Stainless fittings
Soldered guard
Black G-10 spacer
Checkered thumb serrations
Rounded spine & choil
RH Wicket & Craig leather sheath
Last edited:
