1080/15N20 with K&G dyed and stabilized handle with Ebony bolster and nickel-silver and black vulcanized fiber spacers.
Blade height at heel: 1 7/8" (48mm)
Spine thickness at bolster: 0.089" (2.26mm) for ~ 5 1/2" (140mm) up the spine before tapering.
Handle length: 5" (127mm)
Handle width: 1.007" (26mm) at heel tapering to 0.780" (20mm) at bolster
Handle height: 1 1/8" (28.5mm) at heel tapering to 0.968" (25mm) at bolster.
Blade was forged and went through 3 normalizing cycles; quenched, and tempered to ~ 61HRC by me.
$400 USD SOLD
Blade height at heel: 1 7/8" (48mm)
Spine thickness at bolster: 0.089" (2.26mm) for ~ 5 1/2" (140mm) up the spine before tapering.
Handle length: 5" (127mm)
Handle width: 1.007" (26mm) at heel tapering to 0.780" (20mm) at bolster
Handle height: 1 1/8" (28.5mm) at heel tapering to 0.968" (25mm) at bolster.
Blade was forged and went through 3 normalizing cycles; quenched, and tempered to ~ 61HRC by me.
Last edited: