940-2 Picture and Review Thread

S

Sharpening

Joined
Aug 1, 2016
Messages
123
My review is currently in the workings. Any angle or view you want of the 940-2? Also here to answer questions since this is a relatively new knife. Here's some pictures to start it off. the
3b209e3bca31a424902e7bb03ca722e5.jpg
b9dca59d637517dfc1f44b1d1673f1cc.jpg
0f5d94109af67e5e857168a8ec05ef5d.jpg
ac2775f919e314deb7ee3c9d8cdfca34.jpg
630f50730e66f88f6a7c83700f1f4d50.jpg
f37163351582c15567025bc063ffc968.jpg

A few nit picks before I start my review. The g-10 isn't sanded consistently throughout the scales. And the blade grind on the tip is actually steeper on one side than the other (that will quickly get fixed when I sharpen it)
 
Build: This knife feels like a workhorse. The original 940 felt more like a piece of art, especially because of the anodized metal scales. It didn't really feel like something you would want to throw around, but this one certainly does. It is lightweight, tough, and feels good in the hand. I will admit that the original 940 may feel a little more solid because of the aluminum scales. Also, the blade cam RAZOR sharp! I sliced a post-it-note to bits in seconds. It definitely came sharp.

This is basically a 940, so let me talk about the G10. This model is the 'next step' because it is G10. To be honest, I don't think this should be called the same as the original 940. In the EDC world, they seem completely different. This knife looks much less elegant than the 940, and more work oriented. This knife also has a tough G10 instead of the elegant anodized aluminum.

My point is the 940 should be considered a gentleman's folder, while the 940-2 should be considered a perfect EDC. They may look the same, but they are aimed in different directions




Life is like a box of knives, you never know which ones going to be off-center.
 
Build: This knife feels like a workhorse. The original 940 felt more like a piece of art, especially because of the anodized metal scales. It didn't really feel like something you would want to throw around, but this one certainly does. It is lightweight, tough, and feels good in the hand. I will admit that the original 940 may feel a little more solid because of the aluminum scales. Also, the blade came RAZOR sharp! I sliced a post-it-note to bits in seconds. It definitely came sharp.

This is basically a 940, so let me talk about the G10. This model is the 'next step' because it is G10. To be honest, I don't think this should be called the same as the original 940. In the EDC world, they seem completely different. This knife looks much less elegant than the 940, and more work oriented. This knife also has a tough G10 instead of the elegant anodized aluminum.

My point is the 940 should be considered a gentleman's folder, while the 940-2 should be considered a perfect EDC work knife meant to get dirty. They may look the same, but they are aimed in different directions




Life is like a box of knives, you never know which ones going to be off-center.
 
Is it just me, or does the texture look worn down in the first picture (near the pivot on the clip side)?
 
cda555 said:
Is it just me, or does the texture look worn down in the first picture (near the pivot on the clip side)?
Click to expand...

Yes. They sanded the g10, but they weren't consistent. It is fairly annoying because that part of the knife is slippery


Life is like a box of knives, you never know which ones going to be off-center.
f3606fbd34d6eec410ef20618b555ca8.jpg
dbcd0f20e85cd18b5bcdfe51efbcfb5b.jpg
1ed8afb135a59dffd1a95495c606c7fd.jpg
 
Last edited:
I purchased my 940-2 new and the G10 was smooth. I found the aluminum handle had more grip. I also notice a little bit of flex in the 940-2 versus the aluminum handles. I ended up placing a 943 blade on the G10 handles before getting custom G10 scales. I preferred the G10 for my EDC, although I'm about to test out a modified Mini Onslaught for EDC.

Also, the length of the scale's screws are about half way between the short and long screws on the 940/943. The standoffs are shouldered, which is nice, but means you won't be able to swap them with aftermarket standoffs and have the same structural integrity.
 
Scott321 said:
I purchased my 940-2 new and the G10 was smooth. I found the aluminum handle had more grip. I also notice a little bit of flex in the 940-2 versus the aluminum handles. I ended up placing a 943 blade on the G10 handles before getting custom G10 scales. I preferred the G10 for my EDC, although I'm about to test out a modified Mini Onslaught for EDC.

Also, the length of the scale's screws are about half way between the short and long screws on the 940/943. The standoffs are shouldered, which is nice, but means you won't be able to swap them with aftermarket standoffs and have the same structural integrity.
Click to expand...

I haven't noticed any flex, but I do notice the smooth scales. The aluminum had better grip but I found it harder to get in/out of my pockets. The smooth g10 slides right into my pockets


Life is like a box of knives, you never know which ones going to be off-center.
 
And this is why I ordered DOAT scales for mine. Now I do say, I blasted my second one, Cerakoted it Graphite Black and oh boy...it's smoking!
 
I must demand pics DD!!! This is a strict rule that MUST be followed by all!!
Sounds insane cool.....show that bad boy off!!!
😄😄
Joe
 
Since this knife has barrel spacers not a full backspacer, has anyone had problems with their blades getting scratched or chipped by other things in your pocket like your keys or change?
 
jlvanvleet said:
Since this knife has barrel spacers not a full backspacer, has anyone had problems with their blades getting scratched or chipped by other things in your pocket like your keys or change?
Click to expand...

I haven't had any trouble. It is almost impossible for something to perfectly fit through the back. Especially in your pocket. I carry change and keys, but so far nothing has touched the blade. I find that they actually help keep your blade clean because no lint gets stuck inside the knife


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top