A couple of users from W. Crump

steelshaper

steelshaper

Feedback: +12 / =0 / -0
Joined
Jun 14, 2007
Messages
835
Heres a couple super good deals from me to you fine folks.

First up is a camper in 1084 with a hamon to show you whats hard and whats not. Its got stabilized maple burl scales for the handle and it is a full tang knife. tube and pins are stainless steel. 10 1/4 overall 5 1/2 of sharp edge. The blade is 1/4 thick this knife was ground and not forged. Price is (SOLD) $145.00 with shiping and sheath.(SOLD)
camper_in_1084_and_maple_burl.jpg


Next is a couple of edcs in O-1 these are about 6 1/4 overall with 2 3/4 of sharp edge. 9/64 thick or just a little over 1/8 and ground not forged. Full tang with stainless pins and tube.
Cherry burl is (Sold $65.00) shipped This one has a little file work.
G-10 is (Sold) $75.00 (sold) shipped

two_edc_drops.jpg

cherry_edc_spine.jpg


Thanks for looking and any comments.
 
Last edited:
I have a camper and an edc. They are both outstanding blades that will not leave you disappointed in the least! Will's work it top notch and his edges are great.
 
I agree ! my small forged Drop Point from Will went on my belt the day i got it and is still there and i LOVE using it. it has displaced knives costing 2-3X as much. outstanding knife/incredible value. buy one of these. you will NEVER regret it.
roland
 
Thanks Roland and Christian for the kind words you guys are both tops in my book.

The camp knife is sold Pf.

Thanks
 
Murph, it is available still. It does not have a tapered tang however.

Did you get the email I sent you with the pic of your completed knives?
Thanks
William Crump
 
Will,

Just opened the e-mail. They look AWESOME!!! I can't wait to get my hands on them!!! I'm in class right now doing a professional development course. I can't access PayPal from here for some reason, so I'll get out of here and run to my apartment tomorrow and get payment out to you.

I'm still thinking on this one. I may take it too. For any of you other guys looking....... you better grab these before I do.

Murph
 
I am having a bit of a sale. All my available knives are marked down.
Instead of doing a bunch of bumping/posting I am only bumping this one thread. If you would like to see all the knives I have ready to go out just check out my blog.
O-1 and purple heart with patina Sold $65.00
purplheart.jpg


O-1 and bocote is sold $65
bocote.jpg


these are both about 7 1/4 long with 3 inches of edge and are ground from 9/64 x 1 inch O-1 steel

My Dragonette and Scagel styled hunter are both reduced also.

Thanks a bunch folks.
 
Last edited:
Mr. Crump, sent you an email wondering if there is a sheath (or one could be made) for the dragonette and now I see my email server is down. If you didn't get the email, let me know. Also, if you could reply by PM or in this thread rather than emailing me back that would be great. I don't know how long my email will be out of commish. Thanks!
 
Nice Knive's Will, And the price Is right ! I'll take the O-1 and Bocote for $65, I'll be sending a PM, Thank's !
 
I will take the 01 and Cherry Burl, been watching this one for too long not to take at this price :) PM to follow.
 
Hello Will, I sent you a PM on the Purpleheart Scaled Utility In 0-1 with the Beautiful Patina Finish, I will Take It, Thank's Will !
 
Last edited:
I want to thank everyone that purchased knives from me today and also to those who simply expressed intrest in my work. I am now all sold out.

Thanks
 
Will,
I will be recieving a neck knife you made. I had expressed interest in it and it has been gifted to me. I can't wait to get it, when I do I will do a review on it.
Just thought I'd give you a heads up.
 
Hello Will, I got these Beauty's In the Mail Today ! Your Work Is Second to None, Sure Nuff "Top Of The Line" I've heard nothen But Good about your Work and now after seeing It First Hand "These Knive's are In the Hall of Fame In my Collection" ! Thank's for the Beautiful Knive's "Perfect Fit & Finish" and your Wood Working Skill's Is "The Best" the Bocote and the Purpleheart you used Is Stunning, And your the First Knife Maker to Include a Spec's Sheet with a picture and all the Info. on the Knife & Signed By the Maker "Very Proffessional" !

ws6yye.jpg


w1y5ip.jpg
 
Snake Dr. said:
Hello Will, I got these Beauty's In the Mail Today ! Your Work Is Second to None, Sure Nuff "Top Of The Line" I've heard nothen But Good about your Work and now after seeing It First Hand "These Knive's are In the Hall of Fame In my Collection" ! Thank's for the Beautiful Knive's "Perfect Fit & Finish" and your Wood Working Skill's Is "The Best" the Bocote and the Purpleheart you used Is Stunning, And your the First Knife Maker to Include a Spec's Sheet with a picture and all the Info. on the Knife & Signed By the Maker "Very Proffessional" !
Click to expand...

I knew Will makes a mighty fine knife, but that is a very classy touch!:thumbup::D
 
You must log in or register to reply here.
Back
Top