- Joined
- Oct 29, 2010
- Messages
- 919
Hi everyone,
I accept PayPal and ship within the US only.
ZT 0770CF Elmax - Barely used, and de-assisted. I also decided to re-profile the edge to around 30 deg.
The end result isn't too pretty, especially near the heel (see pic). It is, however, ridiculously sharp.
Lockup is solid, and the detent is quite nice with the torsion bar taken out.
The centering is off, but not rubbing. Comes with box & torsion bar. -- **WITHDRAWN**
ZT 0200 *modified* - Lightly used, with marks on the blade and some tiny dings in the edge.
I ground the flipper off because it was uncomfortable in the open position, and the thumb studs work really well without it.
The other mod I did was remove the bulge in the handle near the front finger groove.
My work isn't flawless, but it looks good and feels much better than factory, for me at least.
The function of the knife is perfect- smooth, solid, and centered.
No box. -- $85 **SOLD**
Spyderco Ambitious - I made the scales out of 5/32" thick D2 steel, and stonewashed everything but the hardware.
The scales are nicely rounded and smooth, so it's very ergonomic. Lockup is rock solid, and the blade is centered.
It now has a pocket clip installed (right-hand, tip-up only).
The weight is now 6.4 oz., as opposed to 3.3 oz. from the factory.
Comes with box. -- Re-listed @ much lower price
View attachment 530866View attachment 530870View attachment 530875View attachment 530880View attachment 530881
I accept PayPal and ship within the US only.
ZT 0770CF Elmax - Barely used, and de-assisted. I also decided to re-profile the edge to around 30 deg.
The end result isn't too pretty, especially near the heel (see pic). It is, however, ridiculously sharp.
Lockup is solid, and the detent is quite nice with the torsion bar taken out.
The centering is off, but not rubbing. Comes with box & torsion bar. -- **WITHDRAWN**
ZT 0200 *modified* - Lightly used, with marks on the blade and some tiny dings in the edge.
I ground the flipper off because it was uncomfortable in the open position, and the thumb studs work really well without it.
The other mod I did was remove the bulge in the handle near the front finger groove.
My work isn't flawless, but it looks good and feels much better than factory, for me at least.
The function of the knife is perfect- smooth, solid, and centered.
No box. -- $85 **SOLD**
Spyderco Ambitious - I made the scales out of 5/32" thick D2 steel, and stonewashed everything but the hardware.
The scales are nicely rounded and smooth, so it's very ergonomic. Lockup is rock solid, and the blade is centered.
It now has a pocket clip installed (right-hand, tip-up only).
The weight is now 6.4 oz., as opposed to 3.3 oz. from the factory.
Comes with box. -- Re-listed @ much lower price
View attachment 530866View attachment 530870View attachment 530875View attachment 530880View attachment 530881
Last edited:
