- Joined
- Mar 4, 2007
- Messages
- 1,009
I am the 2nd or later owner of all of the following except the Hell Razor and the Rucki. I will describe the knives as thoroughly as seems reasonable to me. Any more info needed? Ask in a PM. Knives are shown below from left to right.
Drop Point Hunter Proto, (DPHP): Used; Worn DCBB flat grind blade; t = 3/16"; w = 1 1/8"; l = 4 1/8". Black canvas micarta handle; OAL = 8 9/16". Comes with an Okuden black kydex sheath. Great sheath with fine, secure fit. (Never seen another knife like it but, IIRC, "360 joules" knows more about its history. He may tell you if you ask nicely.) $297 => $267 Money Order (MO) or Paypal (PP).
***SOLD*** Desert Groove Master, (DGM): Unused; Desert Sage high saber flat grind with swedge; t = 3/16"; w = 1 5/16"; l = 4 7/16". Tan canvas micarta handle; OAL = 9 3/8". Other than a tiny shiny spot on the top of the tang, logo side near the rear fastener, no wear, smooth spots, or scratches on finish or edge. This model appears to be based on the Badger Attack 3, adding a scalloped spine and swedge, a useable choil and a shorter pommel with no rear Talon hole. No sheath. $297 MO or PP. ***SOLD***
Boss Jack - No choil variant: NOT FOR SALE. Shown only for comparison. (Since I prefer no choil on knives in this size range, Jerry has said no to offering it as an option and the Custom Shop is closed until further notice, no choil Busse blades are limited to what has already been produced. Therefore, I will not sell mine for less than "stupid money". Think the shop price X 10. Try $2750 each. Not a typo. I repeat: NOT FOR SALE.)
*** ON HOLD***(Straight Handle) Satin Jack, [(SH) SJ]: Unused; Black full flat grind blade; t = 1/4"; w = 1 9/32"; l = 6 3/8". Black canvas micarta handle; OAL = 11 1/2". A pristine knife but it does appear to be of later manufacture rather than first release. With the newer HHFSH (instead of SH-E) logo and steel (instead of brass) fastener tubes, IMHO this knife was made for a show like Blade or Knob Creek. Still a real (Straight Handle) Satin Jack. No sheath. $497 MO or PP. (My cost).*** ON HOLD***
***SOLD*** Hell Razor, Military Over-Run, (HR, M O-R): As received directly from Busse combat from the HellRazorGanzaa of 2007. A safe queen but with a trace of finish smoothing/shine on a few high spots from fitting into a large Spec-Ops Combat Master sheath. Desert Sage modified saber ground/milled blade with Corrugated Bevel Technology (CBT) and fuller; t ~ 3/16"; W = 1 3/4"; l = 6 3/4". Magnum Olive and Tan G-10 handle; OAL = 12 1/2". No sheath. $427 MO or PP. ***SOLD***
SRKW Rodent Rucki: As received from SRKW. Still available from SRKW but get it it 2 days instead of "2 weeks". Black convex ground SR 101 blade; t = 3/16"; w = 1 3/8"; l = 15 7/16". Black canvas micarta handles; OAL = 23 1/2". No sheath. $374 (My cost) => $357 MO or PP (My loss). Shipping willl be on me.
(Get it in time for the return of TWD and "help" Michonne zap zombies!)
Knives will be packed and mailed USPS Priority with tracking # at listed price. Insurance or international shipping at additional actual cost.
Purchase requires that it be lawful to own the knife wherever you are.
Interested? PM me.
Thanks for looking,
Pete
Drop Point Hunter Proto, (DPHP): Used; Worn DCBB flat grind blade; t = 3/16"; w = 1 1/8"; l = 4 1/8". Black canvas micarta handle; OAL = 8 9/16". Comes with an Okuden black kydex sheath. Great sheath with fine, secure fit. (Never seen another knife like it but, IIRC, "360 joules" knows more about its history. He may tell you if you ask nicely.) $297 => $267 Money Order (MO) or Paypal (PP).
***SOLD*** Desert Groove Master, (DGM): Unused; Desert Sage high saber flat grind with swedge; t = 3/16"; w = 1 5/16"; l = 4 7/16". Tan canvas micarta handle; OAL = 9 3/8". Other than a tiny shiny spot on the top of the tang, logo side near the rear fastener, no wear, smooth spots, or scratches on finish or edge. This model appears to be based on the Badger Attack 3, adding a scalloped spine and swedge, a useable choil and a shorter pommel with no rear Talon hole. No sheath. $297 MO or PP. ***SOLD***
Boss Jack - No choil variant: NOT FOR SALE. Shown only for comparison. (Since I prefer no choil on knives in this size range, Jerry has said no to offering it as an option and the Custom Shop is closed until further notice, no choil Busse blades are limited to what has already been produced. Therefore, I will not sell mine for less than "stupid money". Think the shop price X 10. Try $2750 each. Not a typo. I repeat: NOT FOR SALE.)
*** ON HOLD***(Straight Handle) Satin Jack, [(SH) SJ]: Unused; Black full flat grind blade; t = 1/4"; w = 1 9/32"; l = 6 3/8". Black canvas micarta handle; OAL = 11 1/2". A pristine knife but it does appear to be of later manufacture rather than first release. With the newer HHFSH (instead of SH-E) logo and steel (instead of brass) fastener tubes, IMHO this knife was made for a show like Blade or Knob Creek. Still a real (Straight Handle) Satin Jack. No sheath. $497 MO or PP. (My cost).*** ON HOLD***
***SOLD*** Hell Razor, Military Over-Run, (HR, M O-R): As received directly from Busse combat from the HellRazorGanzaa of 2007. A safe queen but with a trace of finish smoothing/shine on a few high spots from fitting into a large Spec-Ops Combat Master sheath. Desert Sage modified saber ground/milled blade with Corrugated Bevel Technology (CBT) and fuller; t ~ 3/16"; W = 1 3/4"; l = 6 3/4". Magnum Olive and Tan G-10 handle; OAL = 12 1/2". No sheath. $427 MO or PP. ***SOLD***
SRKW Rodent Rucki: As received from SRKW. Still available from SRKW but get it it 2 days instead of "2 weeks". Black convex ground SR 101 blade; t = 3/16"; w = 1 3/8"; l = 15 7/16". Black canvas micarta handles; OAL = 23 1/2". No sheath. $374 (My cost) => $357 MO or PP (My loss). Shipping willl be on me.
(Get it in time for the return of TWD and "help" Michonne zap zombies!)
Knives will be packed and mailed USPS Priority with tracking # at listed price. Insurance or international shipping at additional actual cost.
Purchase requires that it be lawful to own the knife wherever you are.
Interested? PM me.
Thanks for looking,
Pete
Attachments
Last edited:
