It always saddens me to part with INFI, but I need to thin the herd a bit. I'm not really interested in trading, but will hear offers.
First "I'll take it" post, email or PM gets dibs. Please follow up your post with an email.
1. BJ LE Choilless - black canvas. I will throw in a BJ CG Kydex sheath for free if you want it. It fits the LE just fine and retains the blade well.
$425.
Blade is as new as the day it was born and comes with the original cardboard sheath. The edge is brilliantly sharp (Beef's handiwork if I remember correctly, but will have to double check.)
Contact me for more pictures:
2. BAD - Blue & Black G-10 w/ Mashed Cat Sheath
$295
With the thin blade and higher RC, this blade is literally the ultimate Busse slicer, yet is still capable of hard use and is covered by Busse's warranty. If you have not used a blade with the AD handle, then you are missing out big time. It is by far the best Busse EDC handle, in my opinion, because of its ergonomics and comfort.
Used for some very light duty stuff. The edge is factory, but came a bit dull and can use a sharpening. A quick touch up to the edge and this one will be your favorite slicer. The blade is scratched a bit in one small area. It is hard for me to see it, unless I hold it at the right angle with good lighting, but it is there. There is a very small scuff on the back of the handle as well. This blade is meant to be used as the BAD slicer that it is and is not a safe queen.
Side with minor scratching:
3. Hack Bear Cub w/ Tigerhide Micarta. Comes with a fantastic Rainwalker Gunmetal Grey pocket/neck sheath w/ adjustable neck lanyard. I have another coyote tan sheath that you can have as a freebie if you want it. I don't remember who made it and have never inserted the knife into it.
$210
The knife was sharpened by Beef and is one of the sharpest knives I've owned. The knife is nearly new/unused. The only imperfection I can see is that a few of the brass pins have been scuffed up a bit by the sheath.
Pictures (these pictures do not do the Tigerhide justice):
SAR-3: Red & Black G-10 w/ Barnes Kydex Sheath.
$265
The blade has some light scuff marks on the satin finish and was sharpened by the previous owner. Also, the previous owner did an amazing job of making the handles and jimping less aggressive. If I didn't know any better, I would think that it came from the factory that way. I own other SARs and wish they had the same treatment.
I am not able to add pictures at the moment. Please email or PM me for them. I will get pictures up as soon as possible. The blade and sheath are gorgeous.
Shipping:
Blade and Sheath will ship a day or two after payment clears via USPS priority w/ delivery confirmation and insurance. CONUS only for now as I am unable to ship internationally from work.
Payment:
I'll accept USPS Money Order or Paypal + 3.5% for payment. Price is for CONUS delivery only. If for some reason you are not satisfied with your purchase, I will gladly accept the blade back in the condition it was sent to you in and issue you a refund minus shipping costs.
Etc.:
Buyer must be 18 years of age or older and accepts all responsibility to know and abide by their State & Municipal laws, regulations, ordinances, etc. I reserve the right to not sell to any member for any reason I see fit.
First "I'll take it" post, email or PM gets dibs. Please follow up your post with an email.
1. BJ LE Choilless - black canvas. I will throw in a BJ CG Kydex sheath for free if you want it. It fits the LE just fine and retains the blade well.
$425.
Blade is as new as the day it was born and comes with the original cardboard sheath. The edge is brilliantly sharp (Beef's handiwork if I remember correctly, but will have to double check.)
Contact me for more pictures:
2. BAD - Blue & Black G-10 w/ Mashed Cat Sheath
$295
With the thin blade and higher RC, this blade is literally the ultimate Busse slicer, yet is still capable of hard use and is covered by Busse's warranty. If you have not used a blade with the AD handle, then you are missing out big time. It is by far the best Busse EDC handle, in my opinion, because of its ergonomics and comfort.
Used for some very light duty stuff. The edge is factory, but came a bit dull and can use a sharpening. A quick touch up to the edge and this one will be your favorite slicer. The blade is scratched a bit in one small area. It is hard for me to see it, unless I hold it at the right angle with good lighting, but it is there. There is a very small scuff on the back of the handle as well. This blade is meant to be used as the BAD slicer that it is and is not a safe queen.
Side with minor scratching:
3. Hack Bear Cub w/ Tigerhide Micarta. Comes with a fantastic Rainwalker Gunmetal Grey pocket/neck sheath w/ adjustable neck lanyard. I have another coyote tan sheath that you can have as a freebie if you want it. I don't remember who made it and have never inserted the knife into it.
$210
The knife was sharpened by Beef and is one of the sharpest knives I've owned. The knife is nearly new/unused. The only imperfection I can see is that a few of the brass pins have been scuffed up a bit by the sheath.
Pictures (these pictures do not do the Tigerhide justice):
SAR-3: Red & Black G-10 w/ Barnes Kydex Sheath.
$265
The blade has some light scuff marks on the satin finish and was sharpened by the previous owner. Also, the previous owner did an amazing job of making the handles and jimping less aggressive. If I didn't know any better, I would think that it came from the factory that way. I own other SARs and wish they had the same treatment.
I am not able to add pictures at the moment. Please email or PM me for them. I will get pictures up as soon as possible. The blade and sheath are gorgeous.
Shipping:
Blade and Sheath will ship a day or two after payment clears via USPS priority w/ delivery confirmation and insurance. CONUS only for now as I am unable to ship internationally from work.
Payment:
I'll accept USPS Money Order or Paypal + 3.5% for payment. Price is for CONUS delivery only. If for some reason you are not satisfied with your purchase, I will gladly accept the blade back in the condition it was sent to you in and issue you a refund minus shipping costs.
Etc.:
Buyer must be 18 years of age or older and accepts all responsibility to know and abide by their State & Municipal laws, regulations, ordinances, etc. I reserve the right to not sell to any member for any reason I see fit.
Last edited: