A Pair Of Sebe's for a 3" XM-18

DaveReb

Gold Member
Feedback: +63 / =0 / -0
Joined
Sep 15, 2007
Messages
1,511
Like the header says I'm looking for a Hinderer 3" XM-18. I would prefer a non-flipper but will consider ALL offers. I have a Small insingo, and a large 21 to offer in trade. Both knives have centered blades, and lockup is rock solid, typical of CRK.

CRK small Sebenza Insingo Bought this one new from Knife Art back in 11/10. Lightly used and carried, so it has some very light carry marks on the Ti. Has factory edge, which has only been lightly stropped. I removed the Blue anodizing and lanyard, and will be supplied with the knife.Complete with box, birthcard, and wrench.
HPIM3210.jpg

HPIM3203.jpg

HPIM3204.jpg

HPIM3205.jpg


CRK Large 21 Sebenza Just bought this one used off the board. It has been used and carried, so it does show some typical pocket wear on the Ti. The blade has been resharpened and has a mirror edge. Anodizing has been removed from the spacer and lanyard pin. The blade looks like it hasn't cut much. Birthdate is 01/10
HPIM3208.jpg

HPIM3209.jpg

HPIM3202.jpg

HPIM3207.jpg


Strider TNK tanto PTCC in earth brown, with TNK pouch. LNIB only carried around the house and only opened an envelope or 2. Never sharpened although the tanto edge did not come very sharp. Lock up is rock solid although there is some slight side to side play...a small pivot adjustment would take care of that. It hasn't bothered me enough to fiddle with it.
HPIM3213.jpg


Pick 1 or 2 knives for your 3" XM, I will balance any value differences with cash.



Thanks
Dave
 
Last edited:
Still looking for a 3" XM-18....threw a Strider PTCC Tanto into the mix.

Thanks
Dave
 
Back
Top