- Joined
- Mar 28, 2001
- Messages
- 4,637
Need to raise some money for incoming guns (3 new babies)...
Ray Cover Stag Slipjoint
Here's a rare find for sure. This is a stag slipjoint by Ray Cover, who needs no introduction. But if you don't know him his knives are one of the biggest "bang-for-the-buck" bargains going. Ray has not made very many stag folders in recent years.
This knife features nicely matched stag, dovetailed bolsters with burgundy liners. Perfect walk and talk. 3 1/4" closed with a 2 5/8" hand rubbed blade heat treated by Paul Bos.
Knife has seen some light carry time and a little use, there are some very minor marks on it but you'd be hard pressed to find them in anything but direct light.
**SOLD**
Robert Hankins B2 Bali
I believe this was the first Bali Robert made for resale and it's a winner. Super heavy duty and swings like butter with very little play in the handles, this is the tightest bali I've personally ever owned.
Features:
- 3/16" thick 5160 blade is 4.5" from tip to front of handles.
- Stainless steel handles with red liners and black G-10 scales
- Pivots are Copper bushings, Bronze bearings and SS screws/pivot. (Sebenza type setup)
- Measures 6" closed
- Latchless with a Kydex IWB sheath by Robert
Every time I pick this up I'm amazed at how well it swings. I've carried it a couple of times and it's seen some light flipping but it's in the same condition as when I got it.
The white looking streaks inside the handles is "White Lightning" residue, thought I got it all but it really stands out when the flash hits it.
(**PENDING**) Only $280 shipped in the US (**PENDING**)
Damasteel Jeff Diotte Wharncliffe
This is a fantastic piece by Jeff and i've never seen another like it. i have lightly carried and used it over the years but the edge is excellent touched up once or twice on the sharpmaker, and the only real signs of use are a couple of small marks in the handle.
Features:
- Jelly Roll stainless damascus (damasteel)
- 2 7/8" cutting edge, 6 1/2" overall
- 3 tone scales, Black G-10, CF & Green G-10, Black G-10 pins and thong hole with one mosaic pin.
2 sheaths, one 2 piece Kydex necker by me and the original CF Concealex one from Jeff. The concealex sheath was a little loose for neck carry so I mounted a clip to it and it works great in the pocket. It looks to be drilled for a mini tecloc as well.
Only $210 shipped in the US REDUCED - $185 shipped! Last drop, then eBay - $155 shipped!
Payment via Paypal (+1.5%) or Money Order
No trade please
Email me for quickest response.
Thanks!
Ray Cover Stag Slipjoint
Here's a rare find for sure. This is a stag slipjoint by Ray Cover, who needs no introduction. But if you don't know him his knives are one of the biggest "bang-for-the-buck" bargains going. Ray has not made very many stag folders in recent years.
This knife features nicely matched stag, dovetailed bolsters with burgundy liners. Perfect walk and talk. 3 1/4" closed with a 2 5/8" hand rubbed blade heat treated by Paul Bos.
Knife has seen some light carry time and a little use, there are some very minor marks on it but you'd be hard pressed to find them in anything but direct light.
**SOLD**
Robert Hankins B2 Bali
I believe this was the first Bali Robert made for resale and it's a winner. Super heavy duty and swings like butter with very little play in the handles, this is the tightest bali I've personally ever owned.
Features:
- 3/16" thick 5160 blade is 4.5" from tip to front of handles.
- Stainless steel handles with red liners and black G-10 scales
- Pivots are Copper bushings, Bronze bearings and SS screws/pivot. (Sebenza type setup)
- Measures 6" closed
- Latchless with a Kydex IWB sheath by Robert
Every time I pick this up I'm amazed at how well it swings. I've carried it a couple of times and it's seen some light flipping but it's in the same condition as when I got it.
The white looking streaks inside the handles is "White Lightning" residue, thought I got it all but it really stands out when the flash hits it.
(**PENDING**) Only $280 shipped in the US (**PENDING**)
Damasteel Jeff Diotte Wharncliffe
This is a fantastic piece by Jeff and i've never seen another like it. i have lightly carried and used it over the years but the edge is excellent touched up once or twice on the sharpmaker, and the only real signs of use are a couple of small marks in the handle.
Features:
- Jelly Roll stainless damascus (damasteel)
- 2 7/8" cutting edge, 6 1/2" overall
- 3 tone scales, Black G-10, CF & Green G-10, Black G-10 pins and thong hole with one mosaic pin.
2 sheaths, one 2 piece Kydex necker by me and the original CF Concealex one from Jeff. The concealex sheath was a little loose for neck carry so I mounted a clip to it and it works great in the pocket. It looks to be drilled for a mini tecloc as well.
Only $210 shipped in the US REDUCED - $185 shipped! Last drop, then eBay - $155 shipped!
Payment via Paypal (+1.5%) or Money Order
No trade please
Email me for quickest response.
Thanks!
