AA Forge, Fall Creek, Wind River Wild, Big Chris, NWA, Fiddleback Forge

[grogimus]

More pics available upon request but please send a PM or email for any questions to keep the thread from getting cluttered.

First set of pics has an AA Forge Bush Seax, Fall Creek Bushcrafter, and Wind River Wild Bushcrafter.

I'm the 2nd owner of the AA Forge, I was fairly certain it was 52100 but they're listed as being made from O1 on his site. (Edit, see below. It is 52100.) 3/16" blade stock, green scales with white bolsters over natural liners. It has some patina forming and on the left side of the blade has what looks to be some grinder marks near the edge. Comes with an adequate KSF right handed sheath. $220

Next up is a Fall Creek Bushcrafter in O1 steel with a right handed Diomedes sheath with detachable dangler. It measures .14 inches on my calipers so I'm guessing it started from 5/32" stock. Lightly used cutting up some fuzz sticks. $200

Bottom knife is a Wind River Wild Bushcrafter in 3V with black micarta and blue CTEK scales and a left handed leather sheath. Lightly used but the finish looks like it will hold up very well. $200

Next group has two from Big Chris and one from Nick Allen.

Big Chris Nessmuk in 3V steel from a group buy he ran on his subforum. https://www.bladeforums.com/threads/nessmuk-group-buy-wip.1397896/ Black canvas micarta scales and Kydex sheath, no attachment clip. $275 SOLD

Big Chris Bushcrafter in S90V with camo G10 scales and a serviceable Condor leather sheath. Has seen some use and has some scratches and marks on the blade. Very thin behind the edge and an excellent slicer. $220

NWA/Nick Allen - I'm not sure if an oversized Stinger or a Sierra Scout. 4.75" blade, .17" thick. Black scales over thin red liners and the previous owner had forced a patina on the blade. Comes with a waxed right handed sheath. $200 SOLD

Last up is a Fiddleback Forge EDCII with 1/8" scandi blade and green houndstooth scales over black and green liners. I don't recall if it's O1 or A2. No sheath. $175

Prices are firm and include PayPal fees and shipping in the US. Trade interests are a Spyderco Shaman, GEC 57 Wharncliffe Whittler, Battle Horse Battlelore with bead blasted scales, or LT Wright Outback with burlap scales.

Thanks for looking!

 

[delkhouri]

He used to use 52100 but I think he has had trouble sourcing that steel recently so he uses O1 more often these days.

 

[lmalterna]

I cannot see it closely enough but Adam puts a . under his A for 52100.

Bill

The SEAX appears to be the 5" blade variation?

 

[cmroberts1]

FYI on the AA Forge, If there is a dot under the A on the blade and is a knife less than a couple years old, it is 52100. Which there does appear to be a dot on this knife.

 

[grogimus]

He used to use 52100 but I think he has had trouble sourcing that steel recently so he uses O1 more often these days.

I cannot see it closely enough but Adam puts a . under his A for 52100.

Bill

The SEAX appears to be the 5" blade variation?

FYI on the AA Forge, If there is a dot under the A on the blade and is a knife less than a couple years old, it is 52100.

You guys are right, now I remember reading about the trouble acquiring 52100. It does have the dot under the A and the blade is 5". Thank you!

 

[Kleon]

Thanks sir Nessmuk is beautiful!

 

[Ithaca650]

Any liner on the wild river do you have a blade lentgh oal and thickness thank you great selection

 

[grogimus]

Any liner on the wild river do you have a blade lentgh oal and thickness thank you great selection

You bet. Black liners, unsure if they're micarta or g10. The blade' s just under 4 1/2", overall it's about 9 3/8". The spine reads at .14" on my calipers at its thickest.

 

[gdog363]

I know how unlikely this is, but is the Big Chris Bushcrafter still for sale?