Robert Erickson
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 2, 2014
- Messages
- 2,882
I've got two up for grabs in this thread.
The first one is a CPM-S35VN steel Bird & Trout knife. The handle is dyed camel bone with C-Tek bolsters and blue G10 liners. I reprofiled the handle to be thinner. I wanted it to be a little lighter and more slim. It comes with a handmade leather sheath for vertical carry. It's sharpened with my KME system to 17 DPS and leather stropped with green compound.
SPECS:
OAL: 8.5"
BLADE: 4" full flat grind with a 220 grit satin finish. The edge was 0.007" before sharpening.
STEEL: 0.13" CPM-S35VN heat treated by Peter's to RC60
HANDLE: Dyed camel bone with C-Tek bolsters and blue G10 liners. The pins are black micarta and the lanyard tube is carbon fiber.
SHEATH: Handmade tooled leather
$SOLD shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
IMG_4515 by Robert Erickson, on Flickr
IMG_4516 by Robert Erickson, on Flickr
IMG_4517 by Robert Erickson, on Flickr
IMG_4518 by Robert Erickson, on Flickr
IMG_4519 by Robert Erickson, on Flickr
IMG_4520 by Robert Erickson, on Flickr
IMG_4521 by Robert Erickson, on Flickr
IMG_4522 by Robert Erickson, on Flickr
IMG_4514 by Robert Erickson, on Flickr
The next one is just off the bench. It's a handy little EDC or one that would also be great in the field as a skinner. The AEB-L is heat treated by Peter's to RC61. The handle is stabilized Olive wood burl with green and black liners.
Specs:
OAL: 7.8"
Blade: 3.5" Full flat grind hand finished to 600 grit. The edge was 0.07" before sharpening.
Steel: 0.10" AEB-L heat treated by Peter's to RC61
Handle: Stabilized Olive wood burl with Green G10 and black paper micarta liners. Black micarta pins and carbon fiber lanyard tube.
Sheath: Dyed leather with retention strap.
$SOLD Shipped CONUS, international buyers welcome, shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
IMG_4527 by Robert Erickson, on Flickr
FullSizeRender 50 by Robert Erickson, on Flickr
IMG_4529 by Robert Erickson, on Flickr
IMG_4530 by Robert Erickson, on Flickr
IMG_4531 by Robert Erickson, on Flickr
IMG_4532 by Robert Erickson, on Flickr
IMG_4533 by Robert Erickson, on Flickr
Untitled by Robert Erickson, on Flickr
The first one is a CPM-S35VN steel Bird & Trout knife. The handle is dyed camel bone with C-Tek bolsters and blue G10 liners. I reprofiled the handle to be thinner. I wanted it to be a little lighter and more slim. It comes with a handmade leather sheath for vertical carry. It's sharpened with my KME system to 17 DPS and leather stropped with green compound.
SPECS:
OAL: 8.5"
BLADE: 4" full flat grind with a 220 grit satin finish. The edge was 0.007" before sharpening.
STEEL: 0.13" CPM-S35VN heat treated by Peter's to RC60
HANDLE: Dyed camel bone with C-Tek bolsters and blue G10 liners. The pins are black micarta and the lanyard tube is carbon fiber.
SHEATH: Handmade tooled leather
$SOLD shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
IMG_4515 by Robert Erickson, on FlickrIMG_4516 by Robert Erickson, on FlickrIMG_4517 by Robert Erickson, on FlickrIMG_4518 by Robert Erickson, on FlickrIMG_4519 by Robert Erickson, on FlickrIMG_4520 by Robert Erickson, on FlickrIMG_4521 by Robert Erickson, on FlickrIMG_4522 by Robert Erickson, on FlickrIMG_4514 by Robert Erickson, on FlickrThe next one is just off the bench. It's a handy little EDC or one that would also be great in the field as a skinner. The AEB-L is heat treated by Peter's to RC61. The handle is stabilized Olive wood burl with green and black liners.
Specs:
OAL: 7.8"
Blade: 3.5" Full flat grind hand finished to 600 grit. The edge was 0.07" before sharpening.
Steel: 0.10" AEB-L heat treated by Peter's to RC61
Handle: Stabilized Olive wood burl with Green G10 and black paper micarta liners. Black micarta pins and carbon fiber lanyard tube.
Sheath: Dyed leather with retention strap.
$SOLD Shipped CONUS, international buyers welcome, shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
IMG_4527 by Robert Erickson, on FlickrFullSizeRender 50 by Robert Erickson, on FlickrIMG_4529 by Robert Erickson, on FlickrIMG_4530 by Robert Erickson, on FlickrIMG_4531 by Robert Erickson, on FlickrIMG_4532 by Robert Erickson, on FlickrIMG_4533 by Robert Erickson, on FlickrUntitled by Robert Erickson, on Flickr
Last edited:
