- Joined
- May 3, 2017
- Messages
- 900
For sale:
Aegis Knifeworks Hoplite $300 TRADED
-1 of 2 non-flippers made
-Solid lock-up and action
-Minor carry marks from the previous owner, as can be seen in photos
More photos:
Carter (Robert Carter) F16 midtech $300 SOLD
-Has wear marks that are just superficial snail trails that blend well into the stonewashed/acidwashed finish
More photos:
CKF Farko GRYZ factory custom $225
-Like new
-This was a factory custom, not a secondary market job
-Comes with the COA and all the original packaging/extras
More photos:
Eric Ochs/MD Orca (mokuti) $320 SOLD
-BNIB, just taken out for photos.
-Marbled carbon fiber scales, mokuti pivot collars and clip, purple hardware and liners.
More photos:
Ferrum Forge Fortis 2.0 $220
-Like new
-I cannot find a single flaw in the design or build of this knife. It's simply mechanically perfect.
-Plain gray stone washed variant
More photos:
Ferrum Forge Septer 'Molten' $550
-Like new
-One-off finish by Ferrum Forge
More photos: https://imgur.com/a/GTta7Ya
Ferrum Forge/Gavko Mako $450
-Semi-polish stonewashed blade
-Semi-polish satin flats on the show side scale
-Comes with original packaging
More Photos: https://imgur.com/a/4nIw7Ta
Ferrum Forge/Gavko Spinner $415
-'Atlantian Plates' scale pattern
-Has some handling marks, but they are damn near invisible
More photos: https://imgur.com/a/tc4x74P
Ferrum Forge/MD Falcon (Emler Refinish) $150
-Refinished and sharpened by Michael Emler, who is a Ferrum Forge endorsed 'refinisher' and does sharpening for Ferrum Forge
-Mirror edge
-Tumbled blade, dark bronze handle, and orange peel gold backspacer
More photos: https://imgur.com/a/YxtBQZW
Ferrum Forge/WE Un-named Prototype $250
-Acquired from Blade 2018
-Prototype with no name
More photos: https://imgur.com/a/vAWxifA
ZT 0392 Hellfire Regrind (REK) $430
-Hellfire regrind, satin finish, and stonewashed handle/hardware by Razor Edge Knives
-Has minor handling marks on the blade. The blade is still sharp and has only cut paper
More photos: https://imgur.com/a/G1x2tl4
Aegis Knifeworks Hoplite $300 TRADED
-1 of 2 non-flippers made
-Solid lock-up and action
-Minor carry marks from the previous owner, as can be seen in photos
More photos:
Carter (Robert Carter) F16 midtech $300 SOLD
-Has wear marks that are just superficial snail trails that blend well into the stonewashed/acidwashed finish
More photos:
CKF Farko GRYZ factory custom $225
-Like new
-This was a factory custom, not a secondary market job
-Comes with the COA and all the original packaging/extras
More photos:
Eric Ochs/MD Orca (mokuti) $320 SOLD
-BNIB, just taken out for photos.
-Marbled carbon fiber scales, mokuti pivot collars and clip, purple hardware and liners.
More photos:
Ferrum Forge Fortis 2.0 $220
-Like new
-I cannot find a single flaw in the design or build of this knife. It's simply mechanically perfect.
-Plain gray stone washed variant
More photos:
Ferrum Forge Septer 'Molten' $550
-Like new
-One-off finish by Ferrum Forge
More photos: https://imgur.com/a/GTta7Ya
Ferrum Forge/Gavko Mako $450
-Semi-polish stonewashed blade
-Semi-polish satin flats on the show side scale
-Comes with original packaging
More Photos: https://imgur.com/a/4nIw7Ta
Ferrum Forge/Gavko Spinner $415
-'Atlantian Plates' scale pattern
-Has some handling marks, but they are damn near invisible
More photos: https://imgur.com/a/tc4x74P
Ferrum Forge/MD Falcon (Emler Refinish) $150
-Refinished and sharpened by Michael Emler, who is a Ferrum Forge endorsed 'refinisher' and does sharpening for Ferrum Forge
-Mirror edge
-Tumbled blade, dark bronze handle, and orange peel gold backspacer
More photos: https://imgur.com/a/YxtBQZW
Ferrum Forge/WE Un-named Prototype $250
-Acquired from Blade 2018
-Prototype with no name
More photos: https://imgur.com/a/vAWxifA
ZT 0392 Hellfire Regrind (REK) $430
-Hellfire regrind, satin finish, and stonewashed handle/hardware by Razor Edge Knives
-Has minor handling marks on the blade. The blade is still sharp and has only cut paper
More photos: https://imgur.com/a/G1x2tl4
Last edited:
