- Joined
- Oct 10, 2002
- Messages
- 7,466
.
Here is a rare combo that you might not ever see sold together again. All three are new, a original AK with black linen micarta handles and black smooth coat A2 blade plus the original kydex sheath, AK-47 with black canvas handles and urban grey INFI blade plus a Okuden kydex sheath, Ruck with tan canvas handles and camo INFI blade, plus a Okuden kydex sheath.
O.K., if I can find someone to buy each, I'll sell them separately for:
Original AK: .263" thick, 15.0" A2 blade and 25.5" OAL, black canvas micarta handle, smooth black coat finish,$1300. SOLD!
AK-47: $850. SOLD!(the Okuden kydex sheath is over $100 alone)
Ruck: $850. SOLD! (the Okuden kydex sheath is over $100 alone)
Next set.
FNMOASH, .336" thick double cut blade, this one I ordered special with only (4) serrations on the front cutting edge, new, $1325!
SHSHII, .290" thick A2, The knife has been striped and a Bowie style clip added, the blade length from tip to plunge line is 7.5", the knife has been used a little, comes with a brown leather sheath from Kenny Rowe, $700! SOLD!
"Santa's Outlaw Wicked" variant, new as received from Busse, red G10 handle, .220" thick 6.00" blade (tip to front of Choil, 7.0" tip to handle) and 12.75" overall length. This is one great fighter, their won't be many of these available. Priced below cost, $600!
ASH1 LE, .220" thick satin finish blade, serial #6, new, plus black leather sheath from Amouralleather, $500! SOLD!
Next set:
Tequilla Sunrise AD from Blade 2009, Tequilla Sunrise G10 handles, .320" thick hollow ground blade with top swedge, basically like a Off Duty, $600, both SOLD!
(2) Hacks from Blade 2009 green linen handles, .220" thick, 2 3/4" long INFI blade and 6 7/8 OAL, $200 ea. Both SOLD!
Busse fillet knife, 4.0" .144" thick, hollow ground D2 bead blasted blade, very rare (the only one made I was told in this size) green linen micarta handle, new, no sheath, $400. SOLD!
All of the Culties are .125" thick and new unless otherwise stated.
Custom G-Rex style Stag handle Culti done by me, same one I had at Blade if you saw it, new, with Okuden sheath ($55 value), $380.
Custom Shop satin blade, black G10 & blue maple G-Rex handle with moasic pins, $275. SOLD!
(1) Custom Shop satin blade, hand shaped Tiger hide handles, $250 ea. one SOLD!
Custom Shop satin blade, I re-hand shaped the black canvas handles on this one plus put a slight recurve in the blade, I can take more pictures if needed to show better, $200. SOLD!
There is also a couple sheaths available for the Culties:
(1) Black leather snap sheath by Armoralleather, $40.
(1) Olive green kydex sheath by Steelnut, $20. SOLD!
Scotch dispenser, new, $150. SOLD!
Knife prices include shipping and insurance to the CONUS, (sorry, no sales to Europe), I accept money orders and PayPal +3.5% only. No trades at this time.
Here is a rare combo that you might not ever see sold together again. All three are new, a original AK with black linen micarta handles and black smooth coat A2 blade plus the original kydex sheath, AK-47 with black canvas handles and urban grey INFI blade plus a Okuden kydex sheath, Ruck with tan canvas handles and camo INFI blade, plus a Okuden kydex sheath.
O.K., if I can find someone to buy each, I'll sell them separately for:
Original AK: .263" thick, 15.0" A2 blade and 25.5" OAL, black canvas micarta handle, smooth black coat finish,$1300. SOLD!
AK-47: $850. SOLD!(the Okuden kydex sheath is over $100 alone)
Ruck: $850. SOLD! (the Okuden kydex sheath is over $100 alone)
Next set.
FNMOASH, .336" thick double cut blade, this one I ordered special with only (4) serrations on the front cutting edge, new, $1325!
SHSHII, .290" thick A2, The knife has been striped and a Bowie style clip added, the blade length from tip to plunge line is 7.5", the knife has been used a little, comes with a brown leather sheath from Kenny Rowe, $700! SOLD!
"Santa's Outlaw Wicked" variant, new as received from Busse, red G10 handle, .220" thick 6.00" blade (tip to front of Choil, 7.0" tip to handle) and 12.75" overall length. This is one great fighter, their won't be many of these available. Priced below cost, $600!
ASH1 LE, .220" thick satin finish blade, serial #6, new, plus black leather sheath from Amouralleather, $500! SOLD!
Next set:
Tequilla Sunrise AD from Blade 2009, Tequilla Sunrise G10 handles, .320" thick hollow ground blade with top swedge, basically like a Off Duty, $600, both SOLD!
(2) Hacks from Blade 2009 green linen handles, .220" thick, 2 3/4" long INFI blade and 6 7/8 OAL, $200 ea. Both SOLD!
Busse fillet knife, 4.0" .144" thick, hollow ground D2 bead blasted blade, very rare (the only one made I was told in this size) green linen micarta handle, new, no sheath, $400. SOLD!
All of the Culties are .125" thick and new unless otherwise stated.
Custom G-Rex style Stag handle Culti done by me, same one I had at Blade if you saw it, new, with Okuden sheath ($55 value), $380.
Custom Shop satin blade, black G10 & blue maple G-Rex handle with moasic pins, $275. SOLD!
(1) Custom Shop satin blade, hand shaped Tiger hide handles, $250 ea. one SOLD!
Custom Shop satin blade, I re-hand shaped the black canvas handles on this one plus put a slight recurve in the blade, I can take more pictures if needed to show better, $200. SOLD!
There is also a couple sheaths available for the Culties:
(1) Black leather snap sheath by Armoralleather, $40.
(1) Olive green kydex sheath by Steelnut, $20. SOLD!
Scotch dispenser, new, $150. SOLD!
Knife prices include shipping and insurance to the CONUS, (sorry, no sales to Europe), I accept money orders and PayPal +3.5% only. No trades at this time.
Last edited:
