-
All For Sale threads must have a pic showing the knife being sold with written date listed, your username & Bladeforums or BFC to prevent photo harvesting from elsewhere - scammers hate this one trick! The rules for The Exchange can be found here. Please read and follow them. Stop using Paypal Friends & Family and follow our best practices to prevent getting ripped off or having a bad deal.
-
The BladeForums.com 2024 Traditional Knife is available! Price is $250 ea (shipped within CONUS).
Order here: https://www.bladeforums.com/help/2024-traditional/
all gone
- Thread starter AZTimT
- Start date
- Status
AZTimT
The Stripetition Finish Guy (inactive)
- Joined
- Oct 15, 2009
- Messages
- 4,506
2nd post, Swamp Rat:
Camp Tramp user Black coating partially stripped & black res-c original edge as far as I can tell. This is an old school differential heat treat SR101 blade. withdrawn
Camp Tramp user Black coating partially stripped & black res-c original edge as far as I can tell. This is an old school differential heat treat SR101 blade. withdrawn
Last edited:
AZTimT
The Stripetition Finish Guy (inactive)
- Joined
- Oct 15, 2009
- Messages
- 4,506
3rd post, Scrap Yard:
1111 black/black user with azwelke kydex & large teklok. It was used for chopping, but not splitting for one session and had coating wear from a previous owner chopping with it. It has a tiny shiny spot on the spine and a gouged section of coating missing on the right side of blade where another blade fell against it, no harm to the blade, just coating. If it is a problem, I can strip the flat grind portion for two tone or the entire blade for the buyer.$260, SOLD & SHIPPED
1111 black/black user with azwelke kydex & large teklok. It was used for chopping, but not splitting for one session and had coating wear from a previous owner chopping with it. It has a tiny shiny spot on the spine and a gouged section of coating missing on the right side of blade where another blade fell against it, no harm to the blade, just coating. If it is a problem, I can strip the flat grind portion for two tone or the entire blade for the buyer.$260, SOLD & SHIPPED
Last edited:
AZTimT
The Stripetition Finish Guy (inactive)
- Joined
- Oct 15, 2009
- Messages
- 4,506
Guy, I will check when I get home in a bit and edit this post with the accurate answer, but from memory I believe it was around .15 when I checked it a couple years back, don't hold me to that, my memory ain't what it used to be. Edit: I was off by a bit, it is actually .162 thick, but the full flat grind on it is much thinner than the saber versions so it should be a great slicer. This was one of the offerings you had to catch a chip for that year. I am working on posting the pics for the blades without them.
Last edited:
- Status