- Joined
- May 24, 2011
- Messages
- 490
Holiday cleaning, knives to sell!...
Benchmade Apparition modified by Phillip Dobson with Rosewood Scales - SOLD
This knife has not been carried since its recent vacation with Mr. Dobson. It has a clip but is missing the screws. I ordered a new clip and screws from BM a little while ago and they should be here soon. You can either have me wait to send the knife with the new clip once it arrives or I can send the knife immediately and send the new clip when it arrives, no extra cost. There are some scratches on the blade from light normal use, nothing major. This Apparition still has the spring bar installed in it. After some inspection while taking photos, i noticed that there is a little damage to the screw holding the stud on the blade (see photo), im knocking this down $20. No box, no original scales, sorry.
SOG Fusion FastHawk w/ Kydex Sheath (and original sheath) - SOLD
I received this hawk in a trade not too long ago, but I have too many hawks already so it needs to go. I have not used this hawk but it appears to have some slight scratches on it. It comes with the original nylon sheath along with a kydex sheath made by condahaw (http://www.bladeforums.com/forums/showthread.php/892880-SOG-Hawk-Kydex-Sheath-Malice-Clip-Suspension-Now-Available?highlight=SOG+hawk+sheath)
Eagle Eye Forge Dark EDC - (made by 18 yr old blacksmith Stephen Stumbo) - SOLD
I ordered this knife from Stephen a couple months ago but I haven't used it as much as I thought I would. Comes with a nice black leather pocket sheath. I carried this quite a bit when I first got it but it fell out of rotation. It has not cut a whole lot but I did touch it up a bit on the paper wheels and it is razor sharp.
Here are the specs...
Steel: 1080 with a "dirty hamon"
Handle: Black twill mycarta, with vulcanized red liners, and ss pins.
Measurements: 5 1/2" oal
2 3/4" blade
2 3/4" handle
This is what he said about his process...
"My method is similar to this - http://forums.dfoggknives.com/index.php?showtopic=20860
It's a little different, for example, I use a different clay, and a different clay pattern, but this tutorial is close enough to the same. The main difference, is that I only sanded to 320, and I used dilute ferric chloride. The lower grit, left a little bit of a rougher surface, and the etch actually enhanced some of the scratches, making the blade look somewhat like Wootz. Also, by using ferric, it left the blade a darker color instead leaving it a shiny bare steel lool like normal hamon etches do."
Buck OmniHunter w/out Guthook - SOLD
I got this knife at Cabela's on a trip to Idaho but I just haven't gotten around to using it. The blade was sharpened on a sharpmaker, it takes a shaving sharp edge really easy. It has only cut paper a few times. Makes a great cheap skinner.
First "I'll take it" gets it
US+Canada only
Prices include shipping, USPS priority
PayPal please
Feel free to make an offer, it can't hurt!
I am open to trades for...
whatever you want to offer
Can +/- cash for right trade.
Willing to make deal for multiple items.
Benchmade Apparition modified by Phillip Dobson with Rosewood Scales - SOLD
This knife has not been carried since its recent vacation with Mr. Dobson. It has a clip but is missing the screws. I ordered a new clip and screws from BM a little while ago and they should be here soon. You can either have me wait to send the knife with the new clip once it arrives or I can send the knife immediately and send the new clip when it arrives, no extra cost. There are some scratches on the blade from light normal use, nothing major. This Apparition still has the spring bar installed in it. After some inspection while taking photos, i noticed that there is a little damage to the screw holding the stud on the blade (see photo), im knocking this down $20. No box, no original scales, sorry.
SOG Fusion FastHawk w/ Kydex Sheath (and original sheath) - SOLD
I received this hawk in a trade not too long ago, but I have too many hawks already so it needs to go. I have not used this hawk but it appears to have some slight scratches on it. It comes with the original nylon sheath along with a kydex sheath made by condahaw (http://www.bladeforums.com/forums/showthread.php/892880-SOG-Hawk-Kydex-Sheath-Malice-Clip-Suspension-Now-Available?highlight=SOG+hawk+sheath)
Eagle Eye Forge Dark EDC - (made by 18 yr old blacksmith Stephen Stumbo) - SOLD
I ordered this knife from Stephen a couple months ago but I haven't used it as much as I thought I would. Comes with a nice black leather pocket sheath. I carried this quite a bit when I first got it but it fell out of rotation. It has not cut a whole lot but I did touch it up a bit on the paper wheels and it is razor sharp.
Here are the specs...
Steel: 1080 with a "dirty hamon"
Handle: Black twill mycarta, with vulcanized red liners, and ss pins.
Measurements: 5 1/2" oal
2 3/4" blade
2 3/4" handle
This is what he said about his process...
"My method is similar to this - http://forums.dfoggknives.com/index.php?showtopic=20860
It's a little different, for example, I use a different clay, and a different clay pattern, but this tutorial is close enough to the same. The main difference, is that I only sanded to 320, and I used dilute ferric chloride. The lower grit, left a little bit of a rougher surface, and the etch actually enhanced some of the scratches, making the blade look somewhat like Wootz. Also, by using ferric, it left the blade a darker color instead leaving it a shiny bare steel lool like normal hamon etches do."
Buck OmniHunter w/out Guthook - SOLD
I got this knife at Cabela's on a trip to Idaho but I just haven't gotten around to using it. The blade was sharpened on a sharpmaker, it takes a shaving sharp edge really easy. It has only cut paper a few times. Makes a great cheap skinner.
First "I'll take it" gets it
US+Canada only
Prices include shipping, USPS priority
PayPal please
Feel free to make an offer, it can't hurt!
I am open to trades for...
whatever you want to offer
Can +/- cash for right trade.
Willing to make deal for multiple items.
Last edited: