- Joined
- Nov 2, 2010
- Messages
- 770
Clearing out some space. All prices are total, including shipping and all paypal fees. None of that 'net to me' or 'add 3-4%' BS. Hate that.
As always, it's not a sale/deal until you get your knife and confirm that you're happy. Paypal is easiest for me, no trades, thanks.
(((if you need a sharpener, check out the Worksharp i'm selling over in Gadgets & Gear - got the fancy new ken onion one, so selling my original. Here's the link to that:
http://www.bladeforums.com/forums/showthread.php/1176954-WSKTS-Worksharp-Knife-amp-Tool-Sharpener)))
--------------------------
1) Becker BK2 - Stripped and etched the flats. Micarta handle with stainless hardware. Convexed the edge. Never used it, but it's certainly not new with everything i did to it. I'll find a set of the original grivory handles and include them also (i've got lots of Beckers). No Box, couldn't find it, sorry. The marks on the micarta are not stains, i cleaned the blades and put some mineral oil on them to protect them for shipping, and got a couple fingerprints on the handle - washes right off. The micarta handles are $40 by themselves, so let's go:
$60 SOLD, shipped.
2) Becker BK10 - Exact same story - Stripped, Etched, Micarta handle, Stainless hardware, Convexed the edge (i kind of rounded the tip just a hair when i was convexing it - not bad, but i took a pic so you can see it). Have the box, grivory handles also included.
$60 SOLD, shipped.
3) Becker BK24 - Just doesn't fit my hand right. got the orange and black zytel handles, put a small lanyard on the end for my pinky, put a set of liners in there to thicken it up, stippled the handles. I tried hard. Just doesn't fit my hand right. BNIB, never used, all original material included. Note - On the ESEE side, the tip has a little wider bevel the last couple millimeters close to the tip - doesn't impact edge, and came that way, I just wanted to mention it.
Since I did stipple the zytel handles i bought to go with it, i'll throw them in for free. And I'll leave the liners and lanyard on just in case you want it that way (since you have to cut that kind of lanyard off to remove it).
$40 SOLD, shipped. That's cheaper than a brand new BK24 (which this is), plus the zytel handles.
picture time:
BK2 and BK10
BK24
Thanks for looking, feel free to ask any questions you might have!
Not interested in trades, thanks anyway.
Paypal is gentemanndvm@comcast.net
As always, it's not a sale/deal until you get your knife and confirm that you're happy. Paypal is easiest for me, no trades, thanks.
(((if you need a sharpener, check out the Worksharp i'm selling over in Gadgets & Gear - got the fancy new ken onion one, so selling my original. Here's the link to that:
http://www.bladeforums.com/forums/showthread.php/1176954-WSKTS-Worksharp-Knife-amp-Tool-Sharpener)))
--------------------------
1) Becker BK2 - Stripped and etched the flats. Micarta handle with stainless hardware. Convexed the edge. Never used it, but it's certainly not new with everything i did to it. I'll find a set of the original grivory handles and include them also (i've got lots of Beckers). No Box, couldn't find it, sorry. The marks on the micarta are not stains, i cleaned the blades and put some mineral oil on them to protect them for shipping, and got a couple fingerprints on the handle - washes right off. The micarta handles are $40 by themselves, so let's go:
$60 SOLD, shipped.
2) Becker BK10 - Exact same story - Stripped, Etched, Micarta handle, Stainless hardware, Convexed the edge (i kind of rounded the tip just a hair when i was convexing it - not bad, but i took a pic so you can see it). Have the box, grivory handles also included.
$60 SOLD, shipped.
3) Becker BK24 - Just doesn't fit my hand right. got the orange and black zytel handles, put a small lanyard on the end for my pinky, put a set of liners in there to thicken it up, stippled the handles. I tried hard. Just doesn't fit my hand right. BNIB, never used, all original material included. Note - On the ESEE side, the tip has a little wider bevel the last couple millimeters close to the tip - doesn't impact edge, and came that way, I just wanted to mention it.
Since I did stipple the zytel handles i bought to go with it, i'll throw them in for free. And I'll leave the liners and lanyard on just in case you want it that way (since you have to cut that kind of lanyard off to remove it).
$40 SOLD, shipped. That's cheaper than a brand new BK24 (which this is), plus the zytel handles.
picture time:
BK2 and BK10
BK24
Thanks for looking, feel free to ask any questions you might have!
Not interested in trades, thanks anyway.
Paypal is gentemanndvm@comcast.net
Last edited: