ALL SOLD THANKS.
Be sure to click the links under each picture to open up Hi-res photos of the item!!!
SOLD Victorinox Bantam - $8
A basic but useful pocketknife, I used it mainly to open beers, very light, blade is sharp and has good snap.
Company logo (Asgro) is on back side.
SOLDKa-Bar Dozier - $15
Carried for a very short time, very very sharp, solid lock up, no play, very thin. Excellent and inexpensive knife.
Blade coating is intact except for slight area around pivot from, well....pivoting. Strong pocket clip which is reversible, tip up only.
Album Link: http://www.bluemelon.com/matthew/dozier
SOLD Sabre Japan Barlow - $14
This knife sat unopened for many years, the patina (NOT RUST) should come off with a little steel wool work.
Good lines and sharp edges, nice swedge on master blade, and both blades have great snap.
A very sturdy and authentic Barlow pattern that was forgotten about in a tool box. The overall presentation would benefit greatly from a little care but functionally it seems to be a tough little knife with strong springs and half-stops. Master edge is factory, pen blade has been sharpened.
Album Link: http://www.bluemelon.com/matthew/sabre
SOLD Great Eastern Farm & Field #71 pattern Bullnose in Orange - $40
Delrin scales, typical GEC fit and finish, strong half stop and spring action, a solid work knife. This was used to prepare my lunch for two weeks, nice thin O1 steel blade. Purchased new from dealer. Patina has started. Includes wax paper and tube.
Album Link: http://www.bluemelon.com/matthew/bullnose
SOLDCamillus equal end cigar jack - $39
Not sure how to price this one, so chime in if you think Im off. The deployment of the large single blade provides excellent tactile feel, blade pinches easily and it glides right up to the stop with a nice, smoothness and a muted snap. Springs are no longer as strong as they were, but still satisfactory for sure. Blade patina is from food, convex edge could use a touch up. Brown /Green jigged bone scales. Very thin, about 4 1/4 closed. No half stop.
Album Link: http://www.bluemelon.com/matthew/camillus23cigar
SOLD Camillus pattern #23 Watermelon Jack - $47
Again Im a bit unsure of pricing on these big Camillus Jacks. This one is obviously newer than the cigar, has off white (celluloid?) scales, thick spear point master blade with long pull. The Master blade has up and down play ONLY when in the half stop position but is very solid when open with no play at all. Pen blade has no play at all.
Album link: http://www.bluemelon.com/matthew/camillus23wj-1
SOLD Case 6231 ½ - $55
This is my favorite knife. It has the best walk and talk Ive experienced on a slip joint and I just couldnt bring myself to cut anything with it but paper (mail) and my finger. Lots of pocket time and lots of opening and closing, but it really feels like a tank and not yet broken in. The master blade feels like a fixed blade when deployed. Original factory edge. Some very minimal spots on blades and also back springs see pics.
[Album Link: http://www.bluemelon.com/matthew/case623112
SOLD Benchmade 94x - $79
This was originally a 942 and I used it for years at work. I sent it in to Benchmade for a blade replacement and they replaced the black coated partially serrated 154CM blade with a stonewashed S30V plain blade. They also replaced everything else, except for the well worn black aluminum scales. Other than the scales, this is a brand new razor sharp 940. Includes box.
Album Link: http://www.bluemelon.com/matthew/bm94x
I have lots of feedback on other forums and have been a member (non-gold) here since '06. Finally just decided to man up with the member upgrade to sell of some knives to help fund the purchase the new GEC Barlow and a few others. I'm open to trades for GEC moose or courthouse whittlers, or EO 85 or 2011 forum knife or other traditionals.
PM or email me
Be sure to click the links under each picture to open up Hi-res photos of the item!!!
SOLD Victorinox Bantam - $8
A basic but useful pocketknife, I used it mainly to open beers, very light, blade is sharp and has good snap.
Company logo (Asgro) is on back side.
SOLDKa-Bar Dozier - $15
Carried for a very short time, very very sharp, solid lock up, no play, very thin. Excellent and inexpensive knife.
Blade coating is intact except for slight area around pivot from, well....pivoting. Strong pocket clip which is reversible, tip up only.
Album Link: http://www.bluemelon.com/matthew/dozier
SOLD Sabre Japan Barlow - $14
This knife sat unopened for many years, the patina (NOT RUST) should come off with a little steel wool work.
Good lines and sharp edges, nice swedge on master blade, and both blades have great snap.
A very sturdy and authentic Barlow pattern that was forgotten about in a tool box. The overall presentation would benefit greatly from a little care but functionally it seems to be a tough little knife with strong springs and half-stops. Master edge is factory, pen blade has been sharpened.
Album Link: http://www.bluemelon.com/matthew/sabre
SOLD Great Eastern Farm & Field #71 pattern Bullnose in Orange - $40
Delrin scales, typical GEC fit and finish, strong half stop and spring action, a solid work knife. This was used to prepare my lunch for two weeks, nice thin O1 steel blade. Purchased new from dealer. Patina has started. Includes wax paper and tube.
Album Link: http://www.bluemelon.com/matthew/bullnose
SOLDCamillus equal end cigar jack - $39
Not sure how to price this one, so chime in if you think Im off. The deployment of the large single blade provides excellent tactile feel, blade pinches easily and it glides right up to the stop with a nice, smoothness and a muted snap. Springs are no longer as strong as they were, but still satisfactory for sure. Blade patina is from food, convex edge could use a touch up. Brown /Green jigged bone scales. Very thin, about 4 1/4 closed. No half stop.
Album Link: http://www.bluemelon.com/matthew/camillus23cigar
SOLD Camillus pattern #23 Watermelon Jack - $47
Again Im a bit unsure of pricing on these big Camillus Jacks. This one is obviously newer than the cigar, has off white (celluloid?) scales, thick spear point master blade with long pull. The Master blade has up and down play ONLY when in the half stop position but is very solid when open with no play at all. Pen blade has no play at all.
Album link: http://www.bluemelon.com/matthew/camillus23wj-1
SOLD Case 6231 ½ - $55
This is my favorite knife. It has the best walk and talk Ive experienced on a slip joint and I just couldnt bring myself to cut anything with it but paper (mail) and my finger. Lots of pocket time and lots of opening and closing, but it really feels like a tank and not yet broken in. The master blade feels like a fixed blade when deployed. Original factory edge. Some very minimal spots on blades and also back springs see pics.
[Album Link: http://www.bluemelon.com/matthew/case623112
SOLD Benchmade 94x - $79
This was originally a 942 and I used it for years at work. I sent it in to Benchmade for a blade replacement and they replaced the black coated partially serrated 154CM blade with a stonewashed S30V plain blade. They also replaced everything else, except for the well worn black aluminum scales. Other than the scales, this is a brand new razor sharp 940. Includes box.
Album Link: http://www.bluemelon.com/matthew/bm94x
I have lots of feedback on other forums and have been a member (non-gold) here since '06. Finally just decided to man up with the member upgrade to sell of some knives to help fund the purchase the new GEC Barlow and a few others. I'm open to trades for GEC moose or courthouse whittlers, or EO 85 or 2011 forum knife or other traditionals.
PM or email me
Last edited:
