Charlie Campagna GEC SFO Harness Jack in Tomato Acrylic.
Commisioned in 2012, 1 of 50 made in Tomato Acrylic.
Made on the serpentine 66 pattern.
3.5" closed,which is perfect for pocket carry IMO.
I am the second owner & it has been used & carried and has a patina started on the main so it's already broken in for ya.:thumbup:
Tube & wax paper included.
Here is the thread I got it from with better pics.
$70.00 TYD. SOLD & Shipped
Centered blades.(seen on the left)
Next is a Black GEC Bull Nose I got in a trade.
Carried, but not used much with no marks on the blade,just some scuffing in the delrin.
Flush pivot pins unlike the new Green Micarta versions.
Great walk & talk.
Tube & wax paper included.
$50.00 TYD. SOLD & Shipped
Slightly off center, but no rubbing.
Next is a beautiful old Schrade Cut Co.Walden NY (1917-1946) Barlow in Saw Cut Bone ready for your pocket not a safe.
It's got all kinds of patina/character & the springs are strong. The main was wobbly, but I tightened it up.
The long crack in the mark side cover does not go all the way through,hopefully you can see it in my pic.
There is also a crack near the butt on the mark side,but it is not loose & does not stick out far enough to snag on anything & can barely be felt.(It just adds more character)
Check the pics & decide if this old timer with plenty on miles left on it deserves a spot in your collection/rotation.
$40.00 TYD SOLD & Shipped
Edit to add: I squeezed the bolsters,(in a smooth jawed drill press vise with leather padding)then peened the pin using a Ball Bearing held in the vise & tapping the pin with a small ball peen hammer while resting the other side on the bearing.
Then I sanded the pin & bolsters down to 600 gr. then buffed with 000 scotch-brite.
Now there's no wobble,the blades are still centered & have plenty of snap with half stops.:thumbup:
The marks here on the pile side bolster were present before I tightened it up as you can barely see in pic 2 above & were too deep to sand out.
I'll just call 'em part of the character of the knife.
Mark side.
-------------------------------------------------------------------------------------------------------------------------------------------
All fees are on me so no lowball offers please.
And sorry,no trades,I needs the money honey.
Knives will be shipped with RenWax and or oil 'em.
You must be legally able to own/buy a knife.
The first firm "I'll take it" here or via PM or Email gets desired knife.
Shipping via USPS First Class with tracking.
Payment by Paypal(Prefered) or USPS Money Order.
No international sale unless I know you & you pay the shipping.
Put the knife interested in and your forum name in any message sent please.
If you need more pics just ask & I'll email 'em to ya.
Email me at... myketheknife13 at gmail dot com
Thanks for looking.
Myke
Commisioned in 2012, 1 of 50 made in Tomato Acrylic.
Made on the serpentine 66 pattern.
3.5" closed,which is perfect for pocket carry IMO.
I am the second owner & it has been used & carried and has a patina started on the main so it's already broken in for ya.:thumbup:
Tube & wax paper included.
Here is the thread I got it from with better pics.
$70.00 TYD. SOLD & Shipped
Centered blades.(seen on the left)
Next is a Black GEC Bull Nose I got in a trade.
Carried, but not used much with no marks on the blade,just some scuffing in the delrin.
Flush pivot pins unlike the new Green Micarta versions.
Great walk & talk.
Tube & wax paper included.
$50.00 TYD. SOLD & Shipped
Slightly off center, but no rubbing.
Next is a beautiful old Schrade Cut Co.Walden NY (1917-1946) Barlow in Saw Cut Bone ready for your pocket not a safe.
It's got all kinds of patina/character & the springs are strong. The main was wobbly, but I tightened it up.
The long crack in the mark side cover does not go all the way through,hopefully you can see it in my pic.
There is also a crack near the butt on the mark side,but it is not loose & does not stick out far enough to snag on anything & can barely be felt.(It just adds more character)
Check the pics & decide if this old timer with plenty on miles left on it deserves a spot in your collection/rotation.
$40.00 TYD SOLD & Shipped
Edit to add: I squeezed the bolsters,(in a smooth jawed drill press vise with leather padding)then peened the pin using a Ball Bearing held in the vise & tapping the pin with a small ball peen hammer while resting the other side on the bearing.
Then I sanded the pin & bolsters down to 600 gr. then buffed with 000 scotch-brite.
Now there's no wobble,the blades are still centered & have plenty of snap with half stops.:thumbup:
The marks here on the pile side bolster were present before I tightened it up as you can barely see in pic 2 above & were too deep to sand out.
I'll just call 'em part of the character of the knife.
Mark side.
-------------------------------------------------------------------------------------------------------------------------------------------
All fees are on me so no lowball offers please.
And sorry,no trades,I needs the money honey.
Knives will be shipped with RenWax and or oil 'em.
You must be legally able to own/buy a knife.
The first firm "I'll take it" here or via PM or Email gets desired knife.
Shipping via USPS First Class with tracking.
Payment by Paypal(Prefered) or USPS Money Order.
No international sale unless I know you & you pay the shipping.
Put the knife interested in and your forum name in any message sent please.
If you need more pics just ask & I'll email 'em to ya.
Email me at... myketheknife13 at gmail dot com
Thanks for looking.
Myke
Last edited:
