All sold or relisted.
3.) HDS EDC High CRI SSC P4 [Sold] $130
4.) Fenix PD32 Nichia 129 (modded by datiLED) [Sold] $48 $50
6.) 4Sevens Quark 123² Neutral-white Quark "X" Tactical and extras [Sold outside BF] $70
HDS EDC High CRI SSC P4
Light is carried and used (I believe I am the 2nd owner). Has 3 noticeable and a few other light marks on the bezel, and a light mark on the body (see photos). Tint is very nice and beam pattern offers a perfect smoothness from the center on out (to my eyes anyhow
). Beam is a bit cool in the center and transitions out to a creamy neutral tone. This is the nature of the High CRI SSC P4 emitter. Has older style threads.
Uses 1xCR123A or 1xRCR123 (16340) battery.
Comes with original baggy, clip, user guide, and quick start programming card.
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4260.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4258.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4259.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4261.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4262.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4268.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4266.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4265.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4263.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4264.jpg
Fenix PD32 Nichia 129 (modded by datiLED)
This was a prototype sample sent out to various members for testing before official release. As such, no accessories are included. datiLED received this one but the stock emitter was damaged. He modded this light with an emitter swap to a Nichia 129. This has a CRI 92. Beautiful tint, but I'm cutting down on my lights and found I use others more than this one. In very good condition. Due to the smooth reflector, some rings can be seen. No warranty is offered due to the mod.
UI: Tail button allows for momentary or constant on. Soft pressing the side button will switch the output between low, medium, high, turbo. Hard pressing the side button will enable the nauseating strobe. Hard pressing the side button for 4 seconds (I believe it is) when in strobe will enable s.o.s.
The side button is not level (please see photo). Due to the Nichia 129 emitter, runtime will be slightly less than a stock PD32.
Uses 1x18650 or 2xCR123A batteries.
Only the light is included in this sale.
Beamshots are not 100% representative as my camera could use a bit of an upgrade, but it is as close as I could get them to real life representation.
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4185.jpg
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4186.jpg[
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4188.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4238.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4243.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4214.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4216.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4218.jpg
4Sevens Quark 123² Neutral-white Quark "X" Tactical
This one has a neutral white XM-L emitter from the latest run and has been a daily user for me. As such there are a few anodizing chips but nothing major. In fact, most of the wear is to the pocket clip (see photos).
UI: Has two programmable modes (head tightened and head loosened) with which the user can set to any of the following moonlight, low, medium, high, max, strobe, s.o.s, beacon. Forward clicky allows for momentary activiation, as well as constant on.
Tint: On max has a yellow-white hotspot and all white spill, lower levels do seem to shift a bit more towards a green (although not as bad as the pea green that the 4Sevens/iTP XP-G S2 emitters showed). Tint shifts are common with current regulated lights on lower modes, and while not severe, just wanted to mention this. Also, there is no preflash on this one.
Uses 1x17670, 2xRCR123 (16340), or 2xCR123A batteries.
Comes with green packaging, original pocket clip, deep carry pocket clip (installed), holster, spare o-rings, lanyard, finger grip, and 3x17670 batteries (all 3 fit; 2 slide in smooth, while the 3rd is a bit more snug and needs to be rotated to insert), and battery case.
3.) HDS EDC High CRI SSC P4 [Sold] $130
4.) Fenix PD32 Nichia 129 (modded by datiLED) [Sold] $48 $50
6.) 4Sevens Quark 123² Neutral-white Quark "X" Tactical and extras [Sold outside BF] $70
HDS EDC High CRI SSC P4
Light is carried and used (I believe I am the 2nd owner). Has 3 noticeable and a few other light marks on the bezel, and a light mark on the body (see photos). Tint is very nice and beam pattern offers a perfect smoothness from the center on out (to my eyes anyhow
). Beam is a bit cool in the center and transitions out to a creamy neutral tone. This is the nature of the High CRI SSC P4 emitter. Has older style threads.Uses 1xCR123A or 1xRCR123 (16340) battery.
Comes with original baggy, clip, user guide, and quick start programming card.
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4260.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4258.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4259.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4261.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4262.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4268.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4266.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4265.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4263.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4264.jpg
Fenix PD32 Nichia 129 (modded by datiLED)
This was a prototype sample sent out to various members for testing before official release. As such, no accessories are included. datiLED received this one but the stock emitter was damaged. He modded this light with an emitter swap to a Nichia 129. This has a CRI 92. Beautiful tint, but I'm cutting down on my lights and found I use others more than this one. In very good condition. Due to the smooth reflector, some rings can be seen. No warranty is offered due to the mod.
UI: Tail button allows for momentary or constant on. Soft pressing the side button will switch the output between low, medium, high, turbo. Hard pressing the side button will enable the nauseating strobe. Hard pressing the side button for 4 seconds (I believe it is) when in strobe will enable s.o.s.
The side button is not level (please see photo). Due to the Nichia 129 emitter, runtime will be slightly less than a stock PD32.
Uses 1x18650 or 2xCR123A batteries.
Only the light is included in this sale.
Beamshots are not 100% representative as my camera could use a bit of an upgrade, but it is as close as I could get them to real life representation.
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4185.jpg
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4186.jpg[
http://img.photobucket.com/albums/v217/roskile/lights/th_IMG_4188.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4238.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4243.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4214.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4216.jpg
http://img.photobucket.com/albums/v217/roskile/bf/th_IMG_4218.jpg
4Sevens Quark 123² Neutral-white Quark "X" Tactical
This one has a neutral white XM-L emitter from the latest run and has been a daily user for me. As such there are a few anodizing chips but nothing major. In fact, most of the wear is to the pocket clip (see photos).
UI: Has two programmable modes (head tightened and head loosened) with which the user can set to any of the following moonlight, low, medium, high, max, strobe, s.o.s, beacon. Forward clicky allows for momentary activiation, as well as constant on.
Tint: On max has a yellow-white hotspot and all white spill, lower levels do seem to shift a bit more towards a green (although not as bad as the pea green that the 4Sevens/iTP XP-G S2 emitters showed). Tint shifts are common with current regulated lights on lower modes, and while not severe, just wanted to mention this. Also, there is no preflash on this one.
Uses 1x17670, 2xRCR123 (16340), or 2xCR123A batteries.
Comes with green packaging, original pocket clip, deep carry pocket clip (installed), holster, spare o-rings, lanyard, finger grip, and 3x17670 batteries (all 3 fit; 2 slide in smooth, while the 3rd is a bit more snug and needs to be rotated to insert), and battery case.
Last edited:
