I'm selling to reduce what I have, so I'm not interest in any trades.
U.S. sales only please.
Take $5 off for each additional purchase past the first.
Please feel free to ask questions, ask for other pictures/videos, etc.
Each comes with exactly what you see in the photos.
Items:
SOLDCold Steel Blue Broken Skull CTS-XHP, $75 G&S / $70 FF
SOLDBenchmade 940 Deathgrip Scales DOAT Wood Inlay G10 Scales, $110 G&S / $105 FF
SOLDHogue HK Micro Incursion, $130 G&S / $125 FF
SOLDBenchmade 51 Morpho D2, $180 G&S / $170 FF
Cold Steel Blue Broken Skull CTS-XHP
Knife was purchased to be a user, but I ended up carrying it no more than a handful of times. It was sharpened once. Notice the scratches on the blade from sharpening and a bit of paint missing from the clip. The flimsy washers were also swapped for as large radius as possible phosphor-bronze ones, which are smooth and much more sturdy. A result of that though is the gaps you see in one of the pictures (it's not really noticeable unless you look through the handle with light on the other side--the picture is meant to show it as bad as possible). The one last thing is there is some marking on the handle; please see the whitish spot on the scales in the pictures (non-clip side). Smears on the blade are from tuffglide.
Full set of photos here:
Benchmade 940 Deathgrip Scales DOAT Wood Inlay G10 Scales
I purchased a pack of 940 parts, and these came with it. I did not try mounting them, and they look like they haven't ever been to me. The package came with what you see: scales, backspacer, two screws, and two female posts. Again, I never tried mounting them, so I can't say anything about how they are installed and am selling AS-IS for that reason.
Full set of photos here:
Hogue HK Micro Incursion
Purchased this knife last summer and open/closed it around the house for maybe a week before the spring broke. I called up Hogue, and they sent two replacements. Put one in, tested it a bit (works as good as new), then put it away and haven't carried it since.
It comes with everything it did with new PLUS an extra spring since Hogue sent two.
Sharp factory edge. Deploys and retracts without issues. The only thing I see on it, it looks like one corner is dented but that the anodizing is still in tact on top of the dent (see the video at about 18 seconds in). It wasn't dropped, and I didn't notice until taking the video, so I'm guessing it came new like that. Nevertheless it's a blemish.
Video: https://photos.app.goo.gl/MG7gyiHPGkv8eKfe7
Full set of photos here:
Benchmade 51 Morpho
I purchased this in 2013 or 2014 but then bought a BRS shortly after so didn't really use it much. It's sat around a decade now though, so you can see there are some classic D2 spots on the blade. I tried to point out the worst in the photos, particularly two on the logo side of the blade. There's some anodizing wear around the bottom edge of the clip and a spot on the top. I don't have the original box but do have a 940 box and cloth baggie I will include with it.
Video: https://photos.app.goo.gl/BpL8kawWLtaRMBkL9
Full set of photos here:
U.S. sales only please.
Take $5 off for each additional purchase past the first.
Please feel free to ask questions, ask for other pictures/videos, etc.
Each comes with exactly what you see in the photos.
Items:
SOLD
SOLD
SOLD
SOLD
Cold Steel Blue Broken Skull CTS-XHP
Knife was purchased to be a user, but I ended up carrying it no more than a handful of times. It was sharpened once. Notice the scratches on the blade from sharpening and a bit of paint missing from the clip. The flimsy washers were also swapped for as large radius as possible phosphor-bronze ones, which are smooth and much more sturdy. A result of that though is the gaps you see in one of the pictures (it's not really noticeable unless you look through the handle with light on the other side--the picture is meant to show it as bad as possible). The one last thing is there is some marking on the handle; please see the whitish spot on the scales in the pictures (non-clip side). Smears on the blade are from tuffglide.
Full set of photos here:
Benchmade 940 Deathgrip Scales DOAT Wood Inlay G10 Scales
I purchased a pack of 940 parts, and these came with it. I did not try mounting them, and they look like they haven't ever been to me. The package came with what you see: scales, backspacer, two screws, and two female posts. Again, I never tried mounting them, so I can't say anything about how they are installed and am selling AS-IS for that reason.
Full set of photos here:
Hogue HK Micro Incursion
Purchased this knife last summer and open/closed it around the house for maybe a week before the spring broke. I called up Hogue, and they sent two replacements. Put one in, tested it a bit (works as good as new), then put it away and haven't carried it since.
It comes with everything it did with new PLUS an extra spring since Hogue sent two.
Sharp factory edge. Deploys and retracts without issues. The only thing I see on it, it looks like one corner is dented but that the anodizing is still in tact on top of the dent (see the video at about 18 seconds in). It wasn't dropped, and I didn't notice until taking the video, so I'm guessing it came new like that. Nevertheless it's a blemish.
Video: https://photos.app.goo.gl/MG7gyiHPGkv8eKfe7
Full set of photos here:
Benchmade 51 Morpho
I purchased this in 2013 or 2014 but then bought a BRS shortly after so didn't really use it much. It's sat around a decade now though, so you can see there are some classic D2 spots on the blade. I tried to point out the worst in the photos, particularly two on the logo side of the blade. There's some anodizing wear around the bottom edge of the clip and a spot on the top. I don't have the original box but do have a 940 box and cloth baggie I will include with it.
Video: https://photos.app.goo.gl/BpL8kawWLtaRMBkL9
Full set of photos here:
Last edited:
