- Joined
- Aug 17, 2014
- Messages
- 4,914
Up for sale today are three well loved CRK plain Jane users with lots of life left in them. Only selling because our sump pump went out on us and so some extra funds need to go back into the houshold piggy bank.
First up is my user Large Sebenza 31. This one has an 18 degree per side polished Wicked Edge that is still hair-shaving sharp, and maintained at hair shaving sharpness with a couple strops. Has been carried and used, and the handles and pocket clip have snail trails. I did remove the original thumb stud on this one and replace it with zirconium TI connector thumb studs as shown in the pics. The original thumb stud, lanyard, and blue spacer is included, as is the original box, paperwork, wrench, cloth, and CRK grease. The steel on this one is S35VN.
Centering is dead on and the action on this one is buttery smooth, the blade drops freely when the lockbar is depressed. Lockup is solid in all directions. Price is: $OLD.
Second up is my Large Inkosi drop point. This one was also sharpened on my Wicked Edge and is still shaving sharp, though note that this edge is not polished like the other two. Has been carried and used, and the handles and pocket clip have snail trails. The original box, paperwork, wrenches, cloth, CRK grease, and loctite are all included as well. The steel on this one is S45VN. Centering, lockup, and deployment are all spot on. Price is: $OLD.
Finally, my Large Inkosi insingo blade. This one was also sharpened on my Wicked Edge and is still shaving sharp, and and polished. Has been carried and used, and the handles and pocket clip have snail trails. The original box, paperwork, wrenches, cloth, CRK grease, and loctite are all included as well. The steel on this one is S35VN. Note on this one that I have removed the blue anodizing from the thumbstuds. I just did this by hand using a microfiber cloth, for those who are curious. Centering, lockup, and deployment are all spot on on this one as well. Price is: $OLD.
Prices are all in via Paypal Friends & Family only, and include all shipping fees. Shipping in CONUS only. NO TRADES, funds need to be recouped right now, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me, but an "I'll take it" always takes priority over a pic request.
Thanks in advance, BF!
Multiple Pics of all the knives, boxes, etc are HERE:
First up is my user Large Sebenza 31. This one has an 18 degree per side polished Wicked Edge that is still hair-shaving sharp, and maintained at hair shaving sharpness with a couple strops. Has been carried and used, and the handles and pocket clip have snail trails. I did remove the original thumb stud on this one and replace it with zirconium TI connector thumb studs as shown in the pics. The original thumb stud, lanyard, and blue spacer is included, as is the original box, paperwork, wrench, cloth, and CRK grease. The steel on this one is S35VN.
Centering is dead on and the action on this one is buttery smooth, the blade drops freely when the lockbar is depressed. Lockup is solid in all directions. Price is: $OLD.
Second up is my Large Inkosi drop point. This one was also sharpened on my Wicked Edge and is still shaving sharp, though note that this edge is not polished like the other two. Has been carried and used, and the handles and pocket clip have snail trails. The original box, paperwork, wrenches, cloth, CRK grease, and loctite are all included as well. The steel on this one is S45VN. Centering, lockup, and deployment are all spot on. Price is: $OLD.
Finally, my Large Inkosi insingo blade. This one was also sharpened on my Wicked Edge and is still shaving sharp, and and polished. Has been carried and used, and the handles and pocket clip have snail trails. The original box, paperwork, wrenches, cloth, CRK grease, and loctite are all included as well. The steel on this one is S35VN. Note on this one that I have removed the blue anodizing from the thumbstuds. I just did this by hand using a microfiber cloth, for those who are curious. Centering, lockup, and deployment are all spot on on this one as well. Price is: $OLD.
Prices are all in via Paypal Friends & Family only, and include all shipping fees. Shipping in CONUS only. NO TRADES, funds need to be recouped right now, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me, but an "I'll take it" always takes priority over a pic request.
Thanks in advance, BF!
Multiple Pics of all the knives, boxes, etc are HERE:
Last edited: