- Joined
- Jul 19, 2011
- Messages
- 311
Ok in celebration of membership upgrade I'm posting these 5 knives up. They're priced to move quickly to fund a custom I want to have built, All have been used, some more so than others.
* Prices are all inclusive (PayPal fees, shipped priority, insurance, and confirmation #)
* CONUS shipping only
* No Trades
* Payment with PayPal or MO
* First "I'll take it" here, gets it, followed by an email or PM
Preferred method of contact is Email at t.sous_13245768@yahoo.com and I'll provide more pictures/ answer any questions on request.
1. BHK Frontier First, SOLD
(from BHK website)
- O1
- 5 1/2" OAL
- Cutting edge 2 5/16"
- The BHK is lightly used it had a force patina that I rubbed iff with scotch bright, the blade and handle are in excellent condition otherwise. The leather sheath has some marks and nicks near the open pouch that I tried to highlight in the photos
2. Fallkniven F-1, SOLD
(from Fallkniven website)
Total length: 210 mm (8.3")
Blade length: 97 mm (3.8")
Blade thickness: 4.5 mm (0.18"), tapered
Tang: Broad, protruding
Weight (knife): 150 g (6oz)
Steel: VG10
Blade hardness: 62 HRC
Handle: Thermorun
- The F-1 is lightly used, the only noticeable wear is some rolling on the spine from striking a firesteel I tried to highlight in the pics. The sheath has 3 nicks shown in the pics otherwise like new.
3. Benchmade 710, SOLD
(from Benchmade website)
Blade Length: 3.90"
Blade Thickness: 0.115"
Handle Thickness: 0.480"
Blade Material: D2 Tool Steel
Blade Hardness: 60-62HRC
Blade Style: Modified Clip-Point; Ambidextrous Dual Thumb Studs
Weight: 4.50oz.
- This was a user, now it only gets drawer time. The pocket clip is the only big noticeable wear. The D2 has a light patina developed, otherwise good to go.
4. Benchmade 51, SOLD
Blade Length: 4.25"
Blade Thickness: 0.100"
Blade Material: D2 Tool Steel
Blade Hardness: 60-62HRC
Blade Style: Crown Modified Spear-Point
Weight: 3.30oz.
Lightly flipped and used. The pocket clip is slightly tarnished, the blade has light scratches and a light patina, no edge problems everything else is solid.
5. Bradley Mayhem, SOLD
Blade Material: S30V Stainless Steel (58-60HRC)
Blade Length: 3.83” (9.73cm)
Blade Thickness: 0.150” (3.81mm)
Length Open: 8.53” (21.67cm)
Length Closed: 5.00” (12.70cm)
Weight: 4.20oz (119.07gm)
Handle Material: Machined 6AL 4V-Titanium with Bead Blast Finish Scales; Blue Anodized Aluminum Barrel Spacers; Tempered Steel Stop Pins; Removable High-Polish Stainless Steel Carry-Clip
Handle Thickness: 0.43” (1.09cm)
Lock Mechanism: Integrated Spring-Latch
Blade Style & Opener: Modified Drop-Point; Crowned Blade Spine;
Stone Wash Blade Finish
The blade tip is slightly chipped and there is a chip in one of the serrations. The handles are scratched lightly all over. light scratches on the pocket clip.
BHK Frontier first below.
* Prices are all inclusive (PayPal fees, shipped priority, insurance, and confirmation #)
* CONUS shipping only
* No Trades
* Payment with PayPal or MO
* First "I'll take it" here, gets it, followed by an email or PM
Preferred method of contact is Email at t.sous_13245768@yahoo.com and I'll provide more pictures/ answer any questions on request.
1. BHK Frontier First, SOLD
(from BHK website)
- O1
- 5 1/2" OAL
- Cutting edge 2 5/16"
- The BHK is lightly used it had a force patina that I rubbed iff with scotch bright, the blade and handle are in excellent condition otherwise. The leather sheath has some marks and nicks near the open pouch that I tried to highlight in the photos
2. Fallkniven F-1, SOLD
(from Fallkniven website)
Total length: 210 mm (8.3")
Blade length: 97 mm (3.8")
Blade thickness: 4.5 mm (0.18"), tapered
Tang: Broad, protruding
Weight (knife): 150 g (6oz)
Steel: VG10
Blade hardness: 62 HRC
Handle: Thermorun
- The F-1 is lightly used, the only noticeable wear is some rolling on the spine from striking a firesteel I tried to highlight in the pics. The sheath has 3 nicks shown in the pics otherwise like new.
3. Benchmade 710, SOLD
(from Benchmade website)
Blade Length: 3.90"
Blade Thickness: 0.115"
Handle Thickness: 0.480"
Blade Material: D2 Tool Steel
Blade Hardness: 60-62HRC
Blade Style: Modified Clip-Point; Ambidextrous Dual Thumb Studs
Weight: 4.50oz.
- This was a user, now it only gets drawer time. The pocket clip is the only big noticeable wear. The D2 has a light patina developed, otherwise good to go.
4. Benchmade 51, SOLD
Blade Length: 4.25"
Blade Thickness: 0.100"
Blade Material: D2 Tool Steel
Blade Hardness: 60-62HRC
Blade Style: Crown Modified Spear-Point
Weight: 3.30oz.
Lightly flipped and used. The pocket clip is slightly tarnished, the blade has light scratches and a light patina, no edge problems everything else is solid.
5. Bradley Mayhem, SOLD
Blade Material: S30V Stainless Steel (58-60HRC)
Blade Length: 3.83” (9.73cm)
Blade Thickness: 0.150” (3.81mm)
Length Open: 8.53” (21.67cm)
Length Closed: 5.00” (12.70cm)
Weight: 4.20oz (119.07gm)
Handle Material: Machined 6AL 4V-Titanium with Bead Blast Finish Scales; Blue Anodized Aluminum Barrel Spacers; Tempered Steel Stop Pins; Removable High-Polish Stainless Steel Carry-Clip
Handle Thickness: 0.43” (1.09cm)
Lock Mechanism: Integrated Spring-Latch
Blade Style & Opener: Modified Drop-Point; Crowned Blade Spine;
Stone Wash Blade Finish
The blade tip is slightly chipped and there is a chip in one of the serrations. The handles are scratched lightly all over. light scratches on the pocket clip.
BHK Frontier first below.
Attachments
Last edited:
