- Joined
- Mar 28, 2001
- Messages
- 4,692
Rules, please read.
First post or PM gets it, no email or text, must be a valid forum member
Prices include UPS shipping (USA only) and Fees (PayPal G&S)
I will give an automatic 6% discount for F&F no fee to me payment (PP, Zelle, Venmo) with NO NOTES
If you are outside the US contact me for a quote and to see if I am okay shipping to your location. Canadians can commit to buy with the understanding shipping will be more.
No trades
I will not hold it based on a conditional commitment. Example: "I will take it if...", this is not fair to other buyers.
Happy to entertain solid and reasonable offers or negotiate multiples via PM, not in this thread, but the first commitment gets it.
Important note: I will not be dropping prices in the thread. If you are waiting for reduced prices your best bet is to reach out to discuss.
No games, you buy, I ship, you happy, me sad.
If you want additional photos please send your cell phone number and I can text them to you.
American Blade Works Model 1 Version 6
Bought this from KnifeJoy earlier this year just to check it out. Green G-10 scales and a 20CV blade. It's an awesome knife but just doesn't fit into my carry rotation size wise. It has seen some carry and use but nothing to report in terms of wear. QC is spot on, fires strong with solid lockup and early lock engagement. Perfectly centered and smooth but could use a little break-in.
$200
Curtiss Cruze
Awesome Curtiss Cruze loaded with options, as new in box. Damasteel blade with heat colored scales and bronze titanium hardware. This is an excellent knife all around, perfectly centered, fires like a rocket with early lockup. I carried it a few times but doubt it saw any use, edge is original and very sharp, no signs of use or other marks I can see. Includes pouch, patch and folded makers COA.
$750
Eddleman Custom
This is Sam's Small Gladiator model. It's an older piece with original IKBS bearings and a blade that comes in at just under 3". When I bought this knife used it was dirty, packed with gunk and dull. When I took it apart to clean it there were bearings missing from the previous owner. With some advice from Sam I cleaned everything, installed new ceramic bearings, bead blasted and lightly colored the scales, bead blasted the blade and sharpened it to about 15-16 DPS on my KME with a final micro edge of 20 DPS. I also replaced the old style clip with a Benchmade Deep Carry that looks much better. It is now very smooth, razor sharp and looks great. Lockup is very early and rock solid. Flipping action on this is soft with a light switch method, but very strong with a push button opening. Either way gets the job done. I've carried and used it a bit since the rerun a few years ago, but won't lose sleep if it doesn't sell because I really like it. Replacement price today for this knife would be about $1000.
$425
Hinderer Halftrack Slicer
This is my last Halftrack and has been my favorite, but I just don't carry small folders any more so I am cutting it loose. Perfect QC in every way, blade is centered, fires strong, it's very smooth with early and tight lockup. It has Gillian Salt & Pepper bearings installed, the hardware and blade were lightly acid etched (all bearing surfaces, lock face and threads were protected from etch) and I added a burgundy linen Micarta scale. Finally the factory edge was reprofiled to a near mirror 15-16 degree edge, with a final micro edge set at 20 degrees. This is an amazing cutting combination and easy to maintain. All factory parts and swag included as well as a lime green G10 scale. It has seen some light use and there are some fine marks in the etched blade you can't really see in pictures, the dark line near the tip on the show side was residual oil from me wiping it down before pictures and not permanent.
(SOLD) $275 (SOLD)
Demko AD20.5
This is a wharncliffe AUS10 AD 20.5 a good friend of mine customized. It has been upgraded with a set of RGT Dragons Blood Micarta scales and backspace as well as a Lynch deep carry clip. The original factory clip is also included but no other items are included. QC is great, blade is smooth, centered and locks up rock solid as one would expect. Unused and razor sharp. A really nice build that sets it apart from standard production models.
$165
Zero Tolerance 0308
New in the box ZT 0308 in black G-10 with backwashed titanium and tiger stripe/blackwashed blade. Perfect in every way, very very smooth, fires strong, locks up early and solid. Drops shut with ease.
(SOLD) $250 (SOLD)
Extrema Ratio BD4 Lucky
With a roughly 4.75" blade this is a lot of knife for the money, it's also about as as it gets at under 5 ounces, perfect self defense or utility knife. The dual guard can be used as a flipper or waved from pocket, lockup is solid and early. The Extrema Ratio folders always impress me and are very consistent. Brand new in the box as it was delivered.
(SOLD) $145 (SOLD)
Thanks for looking!
First post or PM gets it, no email or text, must be a valid forum member
Prices include UPS shipping (USA only) and Fees (PayPal G&S)
I will give an automatic 6% discount for F&F no fee to me payment (PP, Zelle, Venmo) with NO NOTES
If you are outside the US contact me for a quote and to see if I am okay shipping to your location. Canadians can commit to buy with the understanding shipping will be more.
No trades
I will not hold it based on a conditional commitment. Example: "I will take it if...", this is not fair to other buyers.
Happy to entertain solid and reasonable offers or negotiate multiples via PM, not in this thread, but the first commitment gets it.
Important note: I will not be dropping prices in the thread. If you are waiting for reduced prices your best bet is to reach out to discuss.
No games, you buy, I ship, you happy, me sad.
If you want additional photos please send your cell phone number and I can text them to you.
American Blade Works Model 1 Version 6
Bought this from KnifeJoy earlier this year just to check it out. Green G-10 scales and a 20CV blade. It's an awesome knife but just doesn't fit into my carry rotation size wise. It has seen some carry and use but nothing to report in terms of wear. QC is spot on, fires strong with solid lockup and early lock engagement. Perfectly centered and smooth but could use a little break-in.
$200
Curtiss Cruze
Awesome Curtiss Cruze loaded with options, as new in box. Damasteel blade with heat colored scales and bronze titanium hardware. This is an excellent knife all around, perfectly centered, fires like a rocket with early lockup. I carried it a few times but doubt it saw any use, edge is original and very sharp, no signs of use or other marks I can see. Includes pouch, patch and folded makers COA.
$750
Eddleman Custom
This is Sam's Small Gladiator model. It's an older piece with original IKBS bearings and a blade that comes in at just under 3". When I bought this knife used it was dirty, packed with gunk and dull. When I took it apart to clean it there were bearings missing from the previous owner. With some advice from Sam I cleaned everything, installed new ceramic bearings, bead blasted and lightly colored the scales, bead blasted the blade and sharpened it to about 15-16 DPS on my KME with a final micro edge of 20 DPS. I also replaced the old style clip with a Benchmade Deep Carry that looks much better. It is now very smooth, razor sharp and looks great. Lockup is very early and rock solid. Flipping action on this is soft with a light switch method, but very strong with a push button opening. Either way gets the job done. I've carried and used it a bit since the rerun a few years ago, but won't lose sleep if it doesn't sell because I really like it. Replacement price today for this knife would be about $1000.
$425
Hinderer Halftrack Slicer
This is my last Halftrack and has been my favorite, but I just don't carry small folders any more so I am cutting it loose. Perfect QC in every way, blade is centered, fires strong, it's very smooth with early and tight lockup. It has Gillian Salt & Pepper bearings installed, the hardware and blade were lightly acid etched (all bearing surfaces, lock face and threads were protected from etch) and I added a burgundy linen Micarta scale. Finally the factory edge was reprofiled to a near mirror 15-16 degree edge, with a final micro edge set at 20 degrees. This is an amazing cutting combination and easy to maintain. All factory parts and swag included as well as a lime green G10 scale. It has seen some light use and there are some fine marks in the etched blade you can't really see in pictures, the dark line near the tip on the show side was residual oil from me wiping it down before pictures and not permanent.
(SOLD) $275 (SOLD)
Demko AD20.5
This is a wharncliffe AUS10 AD 20.5 a good friend of mine customized. It has been upgraded with a set of RGT Dragons Blood Micarta scales and backspace as well as a Lynch deep carry clip. The original factory clip is also included but no other items are included. QC is great, blade is smooth, centered and locks up rock solid as one would expect. Unused and razor sharp. A really nice build that sets it apart from standard production models.
$165
Zero Tolerance 0308
New in the box ZT 0308 in black G-10 with backwashed titanium and tiger stripe/blackwashed blade. Perfect in every way, very very smooth, fires strong, locks up early and solid. Drops shut with ease.
(SOLD) $250 (SOLD)
Extrema Ratio BD4 Lucky
With a roughly 4.75" blade this is a lot of knife for the money, it's also about as as it gets at under 5 ounces, perfect self defense or utility knife. The dual guard can be used as a flipper or waved from pocket, lockup is solid and early. The Extrema Ratio folders always impress me and are very consistent. Brand new in the box as it was delivered.
(SOLD) $145 (SOLD)
Thanks for looking!
Attachments
Last edited:
