No trades
PayPal only
Prices are all in, I cover PayPal fees and shipping (US only)
Know your local laws.
Contact me any way you like, I'll go by the earliest time stamp
All sales are final
1) Andre De Villiers Hummer S35VN blade with Ti & carbon fiber handle $OLD
This has been carried, used, sharpened and lightly modified. It has a “weathered” bronze finish Ti handle with shiny edges, frag pattern carbon fiber inserts, lockbar insert with integrated overtravel stop and a milled pocket clip. The blade is S35VN and has been blasted with satin near the edge to simulate a hamon. My mods were to sand out the hamon on the swedge, which isn’t completely done, and grind down part of the spine to make it less of a hump. I took about 1/8” off the spine at the biggest point and I was extremely careful not to overheat it. I dipped it in water very regularly and it was never too hot to touch to my cheek. These are around $625 new, I priced it low due to the mods, this will make a great user. This is a large, heavy knife, blade length is 4.12”, thickness is .180”, and it has a beefy full length backspacer with integrated lanyard hole. It rides on bearings and has a very robust flipping action that shakes your hand when it locks. Centering is excellent and lockup is solid at 40%ish. Comes with DigiCam ADV soft zipper case.
https://www.dropbox.com/sh/hl46mniy6u7iq92/AACil6UkFKRfskgBx68p_2YGa?dl=0
2) Medford Micro Praetorian T with PVD handles & clip, Vulcan D2 blade and flamed hardware $350
This has been carried a little and very lightly used. It has not been sharpened, still has a sharp factory edge. AFAIK it has not been disassembled, but I'm not the original owner. Action is smooth, lockup is solid and the centering is spot on. Comes with original packaging and papers except the white cardboard box.
https://www.dropbox.com/sh/yg2iodfwakgzt6c/AAB-JseZKn6MtQF9DRV1Y3ZLa?dl=0
3) Shirogorov F95T with M390 blade $575>SOLD
This has been carried a bit, used some and sharpened on my DMT Aligner. There are some light marks from being carried but no deep scratches or anything like that. There are a few tiny nicks in the blade, they are hard to see and too small to photograph, but you can feel them with your fingernail. I’m not the original owner and they were there when I got it. I believe it is SRBS and the inside of the handles are not milled out. It flips beautifully with solid lockup, perfect centering, no lock rock, lock stick or blade play, and it falls shut with just a slight jiggle of the hand, just the way a Shiro should. This is a great blade, but I have 3 Shiros and I like my other 2 better so I’m passing her on. Comes with box, COA and cloth.
https://www.dropbox.com/sh/uzhbgg6jiidh9tw/AABaNvpQxvLRV7qf-xe65Y8Ta?dl=0
PayPal only
Prices are all in, I cover PayPal fees and shipping (US only)
Know your local laws.
Contact me any way you like, I'll go by the earliest time stamp
All sales are final
1) Andre De Villiers Hummer S35VN blade with Ti & carbon fiber handle $OLD
This has been carried, used, sharpened and lightly modified. It has a “weathered” bronze finish Ti handle with shiny edges, frag pattern carbon fiber inserts, lockbar insert with integrated overtravel stop and a milled pocket clip. The blade is S35VN and has been blasted with satin near the edge to simulate a hamon. My mods were to sand out the hamon on the swedge, which isn’t completely done, and grind down part of the spine to make it less of a hump. I took about 1/8” off the spine at the biggest point and I was extremely careful not to overheat it. I dipped it in water very regularly and it was never too hot to touch to my cheek. These are around $625 new, I priced it low due to the mods, this will make a great user. This is a large, heavy knife, blade length is 4.12”, thickness is .180”, and it has a beefy full length backspacer with integrated lanyard hole. It rides on bearings and has a very robust flipping action that shakes your hand when it locks. Centering is excellent and lockup is solid at 40%ish. Comes with DigiCam ADV soft zipper case.
https://www.dropbox.com/sh/hl46mniy6u7iq92/AACil6UkFKRfskgBx68p_2YGa?dl=0
2) Medford Micro Praetorian T with PVD handles & clip, Vulcan D2 blade and flamed hardware $350
This has been carried a little and very lightly used. It has not been sharpened, still has a sharp factory edge. AFAIK it has not been disassembled, but I'm not the original owner. Action is smooth, lockup is solid and the centering is spot on. Comes with original packaging and papers except the white cardboard box.
https://www.dropbox.com/sh/yg2iodfwakgzt6c/AAB-JseZKn6MtQF9DRV1Y3ZLa?dl=0
3) Shirogorov F95T with M390 blade $575>SOLD
This has been carried a bit, used some and sharpened on my DMT Aligner. There are some light marks from being carried but no deep scratches or anything like that. There are a few tiny nicks in the blade, they are hard to see and too small to photograph, but you can feel them with your fingernail. I’m not the original owner and they were there when I got it. I believe it is SRBS and the inside of the handles are not milled out. It flips beautifully with solid lockup, perfect centering, no lock rock, lock stick or blade play, and it falls shut with just a slight jiggle of the hand, just the way a Shiro should. This is a great blade, but I have 3 Shiros and I like my other 2 better so I’m passing her on. Comes with box, COA and cloth.
https://www.dropbox.com/sh/uzhbgg6jiidh9tw/AABaNvpQxvLRV7qf-xe65Y8Ta?dl=0
Last edited:
