PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 472
$255 + 12 CONUS Shipping
click here to view / order
model: She Wolf
grind: scandi
serial: 38
blade length: 4 5/8″
overall length: 9 1/2″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: ironwood handle, lager G10 bolster with bead blasted thumb scallops, black g10 divider and liner over burlap micarta liner
hardware: carbon fiber pins and tube
I've been producing PL knives for the past 8 years. I've done leather work for over 20 and kydex for 5 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a multi-stage normalization before being heated to austenitic temperature and quenched in Parks quench oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
click here to view / order
model: She Wolf
grind: scandi
serial: 38
blade length: 4 5/8″
overall length: 9 1/2″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: ironwood handle, lager G10 bolster with bead blasted thumb scallops, black g10 divider and liner over burlap micarta liner
hardware: carbon fiber pins and tube
I've been producing PL knives for the past 8 years. I've done leather work for over 20 and kydex for 5 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a multi-stage normalization before being heated to austenitic temperature and quenched in Parks quench oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
