AR/SnG Specs?

[L.O. Little]

My present edc is a large plain Sebenza with double thumblugs. My other knife I like to carry is a (manual) Microtech Socom Elite. Sometime in the next few months I plan to buy either an AR or SnG. I have a feeling I'll get the AR, as I like a 3.5-4" blade. From what I gather, the SnG has only a 3" blade.

I'm curious. How thick is an AR with a .25" (flat ground) blade? How "tall" is the blade? Specs on the SnG would also be appreciated...

 

[L.O. Little]

OK, I'm still curious. Over 30 people have looked at my thread & nobody has replied. Are AR owners rare? Have I said something that is perceived as insulting?

 

[KnifeBomber]

Mr. Little,
Just poke around some of the other threads here. All the information you need is there. It is more effort for us to find the info and then bring it here than for you to just browse some of the other threads. Do a search for "AR" and I'm sure you will get 8 bazillion facts and opinions.

 

[L.O. Little]

"Just poke around some of the other threads here. All the information you need is there. It is more effort for us to find the info and then bring it here than for you to just browse some of the other threads. Do a search for "AR" and I'm sure you will get 8 bazillion facts and opinions."

Ryan, I've poked till my my poker's numb. There are "8 bazillion facts and opinions", but few specifics. I simply want to know the dimensions/specs, whatever. How thick is an AR with a .25" (flat ground) blade? How wide is the blade?

 

[Cooper]

FYI, you can't do a search for an AR or GB. The search engine doesn't allow searches of words with less than 3 letters.

 

[MOLEXEY]

http://www.bladeforums.com/forums/showthread.php?s=&threadid=190856&highlight=strider+GB*


Search words were folder specs.

MO

 

[SOX]

Hi Cooper, If you put in the search field AR* it should work. The search won't take 2 letters, but if you put the * it usually works fine.

As for the dimentions on the AR try this post. It was under a GB* search. Good Luck, Reagan
http://www.bladeforums.com/forums/showthread.php?s=&threadid=203692&highlight=GB*

 

[L.O. Little]

MOLEXEY & SOX, thanks for the replies. They really helped!

 

[L.O. Little]

After a LOT of research, I came up with these specs. If any of these are signifigantly innacurate, post the better specs here!
=========================
Entire Knife (Strider AR)

Length (open) 9.425"
Length (closed) 5.52"
Maximum Height (closed) 1.89"
Center of pivot to the blade tip 4.7"
Center of pivot to the butt 4.725"
Weight 9 oz.
------------------
Handle

Thickness .96" (with clip)
Thickness .715" (without clip)
Maximum Height (at its highest point) 1.51"
Minimum Height (at its narrowest point) .98"
--------------------------------------------
Blade

Length 4"
Thickness .19"
Maximum Height 1.61"
BG-42, ATS-34 60-61 RC (per Paul Bos, 7/15/02)
S-30-V 59.5-60 RC (per Paul Bos, 7/15/02)
--------------------
Liner Lock

Thickness 0.10"