billygoat78
Gold Member
- Joined
- Mar 24, 2009
- Messages
- 768
=
Thread is locked to avoid issues with scammers. For similar reasons, I will only sell to gold member or above in good standing. Assume items are available until I mark them otherwise.
I have the following knives for sale. Payment is requested via Paypal, Money order, or personal check (I'll ship when checks clear). All sales are final. Message me to purchase or ask questions.
Depending on when thing sell, I may not be able to ship except on Fridays.
I've also tried to list handle circumferences where that may be an issue. Most people find that their ideal handle circumference for grip and comfort is roughly equal to (or less than) the length of their middle finger. My hands are on the smaller side, so I run into "too fat" handles often, perhaps this helps others.
Any knives that come with leather sheaths have been stored out of sheath to avoid handle staining/darkening and blade corrosion. I may, however, ship those without boxes or blade guards in their sheaths for safety reasons.
Not looking for trades, I have too many knives. (though I am possibly open to very-high hardness knives of any sort, 64 Rc (zdp) or harder).
===================
G. L. Drew Wharncliffe
52100 steel (I'm quite certain), brass guard, hidden and pinned tang. Really nice wood handle. Original owner, never carried, used, or sharpened. I just have too many knives and can't keep them all. Comes with leather sheath with belt loop, as shown.
Asking SOLD
====================
Malanika puukko
I can't remember exactly what this one was called (it's been some years), but if I remember correctly it translated to "simple puukko." Fantastic all-around, really stunning to see and hold. To be honest, I can't remember the steel. High carbon of some sort. I picked this up on the forum a while back for a great price and was so impressed that I've since acquired and ordered several others from this maker. As did the previous owner. . . and perhaps the one before. That should tell you something. Now having similar back-ups, I can finally let go of this one. Never carried, used, or sharpened, and I have no reason be believe previous owners did anything with it either. In the same spirit that I acquired it, I'll offer it up at the same silly price plus half the shipping cost.
Asking $140 PPFF, check, or MO. $144 G&S SOLD
measurements
==============
W. A. Surls
Consider it carried and used. I am not the first owner. If I remember correctly this was one of his earlier knives. At some point before me it was sharpened, a bit wonky to be honest. The price reflects this. I can put a new edge on if the buyer wants for a minimal fee, but it's serviceable as-is. I don't remember the steel (it's high-carbon), model name (stingray?), nor the wood. Mosaic pin, liners, etc. Comes with the nice sheath shown (which appears near new), which I would keep for myself if it fit my other knives. I believe the sheath alone was ~$100 but I can't recall for certain. OAL is 6.75”, blade is 3.25” (tip to scales), edge is 3”. It has orange and black double liners.
Asking $140 shipped PPFF, check, or MO. $145 G&S SOLD
====================
Joey Ramon Str8 Back
Never carried, used, or sharpened. Chisel grind, 1095 steel (I believe). 6.50" OAL, 2.75" blade, 0.15" thick, $265 bladehq price (specs according to the website). Comes with sheath shown, no box or papers (it didn't' come with any).
Asking $185 PPFF, check, or MO. $191 G&S
=================
Fletcher Pocket Kilo
I am not the original owner. It shows some wear, consider it carried and used, probably sharpened at some point. Comes with both sheaths shown. The kydex one is likely home-made by a previous owner, but I'm not certain. Leather sheath has a belt loop. This is probably meant to be a 3-finger knife for hands larger than mine (I wear a medium glove and it fits me funny).
3" O1 blade (I'm quite certain), 6.5" oal, 5/32" thick, black and red double liners
Asking $160 shipped PPFF, check, or MO. $165 G&S SOLD
===========
Jose Diaz Tools Rana (I believe this was sold to me as a Frog Leg, but looking online I think this is probably the Rana model)
I am not the original owner. It shows some wear, consider it carried and used, perhaps sharpened at some point. Comes with the kydex sheath shown. This is probably meant to be a 3-finger knife for hands larger than mine (I wear a medium glove and it fits me funny, just a heads-up). These were (usually/always?) made in s30v according to my research.
Asking $90 PPFF, check, or MO. $93 G&S
===============
Kornalski Knives
I am the original owner. Never carried, used, or sharpened. M2 steel, red liners. I don't remember the model name (Mini Agor I think?). Comes with sheath shown. Very nice knife. I own several others from this maker that I'll keep. This one is a little fatter in the handle than the one I currently use of the same model (but still only 3" / 8cm in circumference at the fattest useable part). The handle length on these fits me great, I probably wouldn't suggest this for XL hands unless you want to hug the butt. Kornalski makes some great knives at very affordable prices. 7.5” OAL, 3.25” (tip to scales). 3.125” edge. No belt loop on the sheath, horizontal grommets are spaced at 1 7/16”, if that helps. Some distal taper starting about 1” from the tip. Also swedged.
Asking $100 shipped PPFF, check, or MO. $103 G&S. SOLD
measurements
================
Add-on Ahti SOLD
This never carried, used, or sharpened Ahti can be added to any order for an additional $30. I can't recall the model name. It's almost certainly a Laurin Metalli blade in high-carbon (I never get stainless when there's an option). The handle is a fatty (3.75" / 10cm in circumference at the fattest) that I had meant to take down to a shape and size I prefer, but I have too many project knives already. This would be a great beater, project, way to practice sharpening a scandi, or use as-is.
=============
Thanks for looking
Thread is locked to avoid issues with scammers. For similar reasons, I will only sell to gold member or above in good standing. Assume items are available until I mark them otherwise.
I have the following knives for sale. Payment is requested via Paypal, Money order, or personal check (I'll ship when checks clear). All sales are final. Message me to purchase or ask questions.
Depending on when thing sell, I may not be able to ship except on Fridays.
I've also tried to list handle circumferences where that may be an issue. Most people find that their ideal handle circumference for grip and comfort is roughly equal to (or less than) the length of their middle finger. My hands are on the smaller side, so I run into "too fat" handles often, perhaps this helps others.
Any knives that come with leather sheaths have been stored out of sheath to avoid handle staining/darkening and blade corrosion. I may, however, ship those without boxes or blade guards in their sheaths for safety reasons.
Not looking for trades, I have too many knives. (though I am possibly open to very-high hardness knives of any sort, 64 Rc (zdp) or harder).
===================
G. L. Drew Wharncliffe
52100 steel (I'm quite certain), brass guard, hidden and pinned tang. Really nice wood handle. Original owner, never carried, used, or sharpened. I just have too many knives and can't keep them all. Comes with leather sheath with belt loop, as shown.
Asking SOLD
====================
Malanika puukko
I can't remember exactly what this one was called (it's been some years), but if I remember correctly it translated to "simple puukko." Fantastic all-around, really stunning to see and hold. To be honest, I can't remember the steel. High carbon of some sort. I picked this up on the forum a while back for a great price and was so impressed that I've since acquired and ordered several others from this maker. As did the previous owner. . . and perhaps the one before. That should tell you something. Now having similar back-ups, I can finally let go of this one. Never carried, used, or sharpened, and I have no reason be believe previous owners did anything with it either. In the same spirit that I acquired it, I'll offer it up at the same silly price plus half the shipping cost.
measurements
==============
W. A. Surls
Consider it carried and used. I am not the first owner. If I remember correctly this was one of his earlier knives. At some point before me it was sharpened, a bit wonky to be honest. The price reflects this. I can put a new edge on if the buyer wants for a minimal fee, but it's serviceable as-is. I don't remember the steel (it's high-carbon), model name (stingray?), nor the wood. Mosaic pin, liners, etc. Comes with the nice sheath shown (which appears near new), which I would keep for myself if it fit my other knives. I believe the sheath alone was ~$100 but I can't recall for certain. OAL is 6.75”, blade is 3.25” (tip to scales), edge is 3”. It has orange and black double liners.
====================
Joey Ramon Str8 Back
Never carried, used, or sharpened. Chisel grind, 1095 steel (I believe). 6.50" OAL, 2.75" blade, 0.15" thick, $265 bladehq price (specs according to the website). Comes with sheath shown, no box or papers (it didn't' come with any).
Asking $185 PPFF, check, or MO. $191 G&S
=================
Fletcher Pocket Kilo
I am not the original owner. It shows some wear, consider it carried and used, probably sharpened at some point. Comes with both sheaths shown. The kydex one is likely home-made by a previous owner, but I'm not certain. Leather sheath has a belt loop. This is probably meant to be a 3-finger knife for hands larger than mine (I wear a medium glove and it fits me funny).
3" O1 blade (I'm quite certain), 6.5" oal, 5/32" thick, black and red double liners
===========
Jose Diaz Tools Rana (I believe this was sold to me as a Frog Leg, but looking online I think this is probably the Rana model)
I am not the original owner. It shows some wear, consider it carried and used, perhaps sharpened at some point. Comes with the kydex sheath shown. This is probably meant to be a 3-finger knife for hands larger than mine (I wear a medium glove and it fits me funny, just a heads-up). These were (usually/always?) made in s30v according to my research.
Asking $90 PPFF, check, or MO. $93 G&S
===============
Kornalski Knives
I am the original owner. Never carried, used, or sharpened. M2 steel, red liners. I don't remember the model name (Mini Agor I think?). Comes with sheath shown. Very nice knife. I own several others from this maker that I'll keep. This one is a little fatter in the handle than the one I currently use of the same model (but still only 3" / 8cm in circumference at the fattest useable part). The handle length on these fits me great, I probably wouldn't suggest this for XL hands unless you want to hug the butt. Kornalski makes some great knives at very affordable prices. 7.5” OAL, 3.25” (tip to scales). 3.125” edge. No belt loop on the sheath, horizontal grommets are spaced at 1 7/16”, if that helps. Some distal taper starting about 1” from the tip. Also swedged.
measurements
================
=============
Thanks for looking
Last edited: