Bill Siegle
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 3, 2000
- Messages
- 6,913
Baby Bolo proto is available. This is a nice belt sized blade with a little heft to it so it can deliver some chopping along with cutting. This is a proto so it was not finished as pretty as a first run blade but it will perform just as well 
This is $225 shipped in the US. It is a tad over 11in long overall with a 6 1/2in blade tip to handle. I used 1/4in thick 5160 with a differential heat treat for the blade. Scales are natural linen micarta attached with epoxy and flared stainless tubes. The tang was drilled out a bit to keep the weight(13oz) a little forward. Sheath is black Kydex set up for a large sized Tek Lok(not included).
This is $225 shipped in the US. It is a tad over 11in long overall with a 6 1/2in blade tip to handle. I used 1/4in thick 5160 with a differential heat treat for the blade. Scales are natural linen micarta attached with epoxy and flared stainless tubes. The tang was drilled out a bit to keep the weight(13oz) a little forward. Sheath is black Kydex set up for a large sized Tek Lok(not included).
Last edited:
