bacustomknives
FULL THROTTLE / FULLTIME KNIFE MAKER
- Joined
- Sep 3, 2008
- Messages
- 13,078
THIS IS BEING SOLD AS A LOT, ALL FOR ONE MONEY!! ALL WOOD IS STBILIZED,HERES THE BREAK DOWN.
YOU GET ALL 6 SETS BELOW
PRICE $145.00 SHIPPED
PAYPAL-BACUSTOMKNIVES@YAHOO.COM
1ST PIC
BOX ELDER BURL
4 7/8" X 1 3/4"X 5/16"+
5 1/8" X 1 3/4"X 3/8"
2ND PIC
BOX ELDER BURL
4 5/8" X 1 3/4"X 1/4"+
4 1/2" X 1 1/2"X 3/8"
3RD PIC
SPALTED BIRCH /BOX ELDER BURL
5 1/2" X 1 1/2"X 1/2"
4 3/4" X 1 3/4"X 3/8"
I HAVE A BUNCH OF BLADES FINNISHED UP AND THERE LAYING EVERYWERE SO I DECIDED ILL PART WITH A FEW OF THEM TO GIVE YOU DO IT YOURSELFER'S A STAB AT IT,ALL THESE BLADES ARE FULLY GROUND,FULLY HARDENED FROM TIP TO REAR,AND TEMPERED,READY FOR HANDLES, WITH A CUTTING EDGE PUT ON THEM THERE NOT RAZOR SHARP AS YOU CAN STROP THEM OR SHARPEN THEM HOW YOU WANT,THEY WILL CUT YOU AS IS. TAPE THE CUTTING EDGES UP BEFORE STARTING YOUR PROJECT PLEASE,THEY ALL ARE ALDO'S 1095 CARBON,THEY HAVE BEEN GROUND TO 600 AND POLISHED OUT WITH A FINE NORTON WHEEL,THEN BUFFED WITH WAX. YOU CAN PUT YOUR OWN FINNISH ON THEM,SATIN,HAND RUBBED ECT,SOME MAY HAVE SMALL SCRATCHES ECT,I RARELY DO THIS BUT NO USE IN THEM LAYING IN THE SHOP,AS IM GONNA TAKE A FISHING TRIP ILL GIVE YOU ALL SOMETHING TO DO WHILE IM GONE,THESE ALL ARE 5/32" 1095 STOCK
FIRST ILL TAKE IT BY TIME STAMP AS THESE ARE LISTED ELSEWERE
#1 8" OAL 3 1/2" BLADE - HUNTER / TOP BEVEL -$60 SOLD TO BRISKET
#2 8" OAL 3 5/16" BLADE - HUNTER / TOP BEVEL -$60
#3 9" OAL 4" BLADE -LARGE HUNTER / TOP BEVEL -$75
YOU GET ALL 6 SETS BELOW
PRICE $145.00 SHIPPED
PAYPAL-BACUSTOMKNIVES@YAHOO.COM
1ST PIC
BOX ELDER BURL
4 7/8" X 1 3/4"X 5/16"+
5 1/8" X 1 3/4"X 3/8"
2ND PIC
BOX ELDER BURL
4 5/8" X 1 3/4"X 1/4"+
4 1/2" X 1 1/2"X 3/8"
3RD PIC
SPALTED BIRCH /BOX ELDER BURL
5 1/2" X 1 1/2"X 1/2"
4 3/4" X 1 3/4"X 3/8"
I HAVE A BUNCH OF BLADES FINNISHED UP AND THERE LAYING EVERYWERE SO I DECIDED ILL PART WITH A FEW OF THEM TO GIVE YOU DO IT YOURSELFER'S A STAB AT IT,ALL THESE BLADES ARE FULLY GROUND,FULLY HARDENED FROM TIP TO REAR,AND TEMPERED,READY FOR HANDLES, WITH A CUTTING EDGE PUT ON THEM THERE NOT RAZOR SHARP AS YOU CAN STROP THEM OR SHARPEN THEM HOW YOU WANT,THEY WILL CUT YOU AS IS. TAPE THE CUTTING EDGES UP BEFORE STARTING YOUR PROJECT PLEASE,THEY ALL ARE ALDO'S 1095 CARBON,THEY HAVE BEEN GROUND TO 600 AND POLISHED OUT WITH A FINE NORTON WHEEL,THEN BUFFED WITH WAX. YOU CAN PUT YOUR OWN FINNISH ON THEM,SATIN,HAND RUBBED ECT,SOME MAY HAVE SMALL SCRATCHES ECT,I RARELY DO THIS BUT NO USE IN THEM LAYING IN THE SHOP,AS IM GONNA TAKE A FISHING TRIP ILL GIVE YOU ALL SOMETHING TO DO WHILE IM GONE,THESE ALL ARE 5/32" 1095 STOCK
FIRST ILL TAKE IT BY TIME STAMP AS THESE ARE LISTED ELSEWERE
#1 8" OAL 3 1/2" BLADE - HUNTER / TOP BEVEL -$60 SOLD TO BRISKET
#2 8" OAL 3 5/16" BLADE - HUNTER / TOP BEVEL -$60
#3 9" OAL 4" BLADE -LARGE HUNTER / TOP BEVEL -$75
Last edited:
