Bad MOJO Photo & Info Submission

Status
Not open for further replies.
Custom flying Hell Razor

Blade Steel - INFI, Blade Length - 6.62, Overall Length - 12.75, Weight (oz) - 15.4, Blade Thickness - 0.2, Blade Width - 1.73, Options - Nuclear swedge, Flying teeth, Hand shapped Green/black G10.


Busse-group-flying-1.JPG
 
The Hood LE#18

Blade Steel - INFI, Blade Length - 10, Overall Length - 15.56, Weight (oz) - 19.9, Blade Thickness - 0.25, Blade Width - 1.5

Busse-HOOD-8.JPG


Busse-HOOD-9.JPG


Busse-HOOD-6.JPG


Busse-HOOD-7.JPG
 
awesome Monte!:thumbup:

Ed, You might like these for your DSF page. THe field grade GP Busse is the flat ground version that is already on your website. I ended up with all 6 of 1/6 Nuclear Snakeskin DSF's with help from my buddy Cutshaw. I ended up sending a few out to proxies/ got two back and sold another. To my knowledge they were all saber ground except for #4 which had a full height flat grind and is noticeably lighter and faster.

I still have these
banditswardoginfishba018.jpg


banditswardoginfishba019.jpg


banditswardoginfishba020.jpg



Not sure if you will ever get to Swamp rat and scrapyard but if you do
Heres the entire set of War Dogs
bladeshow2011023.jpg


bladeshow2011025.jpg


and ratmandu prototypes
bladeshow2011017.jpg


bladeshow2011018.jpg
 
Wow! Thanks a lot HOGS! A lot of great photos to add to the site which I've already done so on some of the photos. I'm going to close this thread after a few more days as I already have a lot on my plate. I will need the time to add your photos to the site. Some of the photos will go in the existing galleries but others will need to go to new galleries. I still have close to about 30 new galleries to add tot he site. I already added 19 new galleries to the site within a three week period.

knifehunter, I have no plans to add Swamp Rat or Scrapyard to the site. It's just too much additional work. The Swamp Rat knives have evolved since they first started. Nice looking knives.
 
Sounds good Ed. You have definitely been busy:cool:

I didnt think the kin would make it, and totally understand. I found all those pics on same page as snake dsf which I wasnt sure if you found em in my photo albumn I sent you. THey were in an odd place, but were all together and it was an easy link.:thumbup:
 
awesome Monte!:thumbup:

Ed, You might like these for your DSF page. THe field grade GP Busse is the flat ground version that is already on your website. I ended up with all 6 of 1/6 Nuclear Snakeskin DSF's with help from my buddy Cutshaw. I ended up sending a few out to proxies/ got two back and sold another. To my knowledge they were all saber ground except for #4 which had a full height flat grind and is noticeably lighter and faster.

T, #3 of 6 is still with me (thanks again!) and is like your #4...full height ground and quicker 'n' greased lightning in the hand. :thumbup: I'll add a pic here of it and my other 3 snakeskin DSF's just as soon as my cam batts recharge.
 
T, #3 of 6 is still with me (thanks again!) and is like your #4...full height ground and quicker 'n' greased lightning in the hand. :thumbup: I'll add a pic here of it and my other 3 snakeskin DSF's just as soon as my cam batts recharge.

cool. So 10 flat ground original GPB's and only two flat ground 1/6 Nuclear snakeskin DSF's:thumbup:
 
Jaxx sir, whoever said you were an INFI stud, I agree wholeheartedly. :)

Great pics brother. :thumbup:

Brother, coming from you, I'm honored to accept that compliment! :) Your collection is incredible and extremely drool-worthy. Seriously, you've put together a fine group of Busse's in a fairly short period of time and I'm glad that you like to show 'em, especially that Hood LE. Ya done good, man! :thumbup:
 
Urban Grudge & UG variant
AGRussellShow_UGUG-v.jpg

Off Duty giraffe bone & G-10 handle
ActiveDuty_CSOffDuty1.jpg

Off Duty machined snakeskin handle (pretty sure only 1 of 2 with machined snakeskin, with the other being Dark Nemesis' Prototype)
ActiveDuty_CSOffDuty_S-SS.jpg

Off Duty pair
ActiveDuty_OffDutyPair.jpg

ActiveDuty_OffDutyPair-Spine.jpg

2008 SE SARsquatch & SARsquatch bowie variant
Busse_Squatch-v_SARsquatch2.jpg

Busse_Squatch-v_SARsquatch1.jpg

The BOSS Street LE was offered in 3 different choil sizes... No choil, small choil, large choil. Here's all three #27's
Busse_BOSS-Street_27x3a.jpg

Busse_BOSS-Street_27x3b.jpg

NEW Busse folder prototype shown at BLADE 2011
Busse_Closeup-FOLDER-BLADE2011.jpg

BLADE2011_Busse_Folder-Peek.gif
:D
Nuclear CG BOSS Jack
BUSSE-CS-USC_Nuke_BOSS_Jack.jpg

INFI SHSHII
Busse-SHSHIIa.jpg

Custom Shop original style Team Gemini pair in satin/Tigerhide (not Light Brigade)
Busse-CS_TeamGemini-Pair1.jpg

Busse-CS_TeamGemini-Pair2.jpg

Original CG Team Gemini (not LB... first offered @ BLADE 2010)
Busse_TeamGemini-MashedCat.jpg

Pepper Shaker
Busse-Pepper_Shaker1.jpg

Busse-Pepper_Shaker4.jpg

Desert SJ pair
Busse-Desert_SJ-Pair.jpg

Terror Monkey Argonne Assault
Busse_TMAA-1.jpg
 
Last edited:
Feel free to use any of mine you happen to run across... Nice to see the WASP SHBM up on your site. :)
 
I will try to get a few collections together.

1 - The Bird ^ Trout
2 - The origial Tan Lean Mean Streets
3 - The Mean Street 1.5 prototypes. Never released to the public. 3 were sold at Blade in carious colour scale, jimpin combos. A fourth was kept at the shop, and later made into the "Anniversary" knife. The 5th is in the Busse Black Hole... These were what were planneded on release during the Ergo dynasty, but were back burnered,

Will try to get some pics this week.
 
I saw you got the BATAC gallery up. :)

Here's a few others & variants if you want them.

Ganza LE thickness (.27") DCBB BATAC with black canvas micarta & mosaic pins
Ganzaaaaa_GrayGhost-BATAC2.jpg


LE's # 23 (as is) & LE #27 (oiled Tigerhide)
27_23_BATACLEs-1.jpg


Ganza BATAC recurve variant (.27" thick w/serrated band breaker & finger grooved handle)
CupidGanza_32.jpg


Urban Shadow Camo & black G-10 CG BATAC (This one didn't make my group shot :D ...10, count 'em 10, LOL...and probably one or 2 more floating around here! ;))
BATAC_USC-1.jpg


DCBB .27" thick BATAC with ironwood handles
BATAC_Ironwood-1.jpg

BATAC_Ironwood-2.jpg


I think that's it for BATAC's from me. Here's a few other pix, :)

SJ's... ZTSJ with a not so common swedge (.22"), Custom Shop Desert SJ (.22"), A more recently released (@ Knob Creek) LE thickness SJ (.25", not an LE), and saber style hollow ground variant with light swedge. Thin enough to slice well especially with the light hollow grind, pointy & with thick saber flats... stabby! (.187").
Busse_Satin-Jacks_GroupShot.jpg


SAR8, black paper handle with satin finish
Busse_SAR-8_BP1.jpg


Busse HACK Active Duty
HACK_ActiveDuty.jpg


AG Russell Show CGFBM, .25" thick, Tanker Gray, and the jury is still out on the handles...it's a linen micarta, but hard to determine if it is green or black. (I'm going with green. ;))
CGFBM_AGRussellShow2010.jpg


CGFBM from the original run. Desert Shadow Camo with snakeskin micarta
Busse_DSC-SS_CGFBM.jpg


SAR-6 LE #27
Busse_SAR6LE27.jpg


Someone will certainly have a better pic, but this is a Scotch Dispenser next to a Black Skelly Warden for a size comparison
Busse-SkGW_SD-1.jpg


Custom Shop Game Warden, .187" thick "G-Rex" w/snakeskin. BTW, "G-Rex" is Garth's creation of a bolster (usually G-10) that also runs the length of the tang with an inlay of another material on top...in this case, snakeskin micarta. :)
BUSSE-CS_GREX-GW_BLADE2011a.jpg

BUSSE-CS_GREX-GW_BLADE2011b.jpg

This pic shows the G-Rex better, even though the flash kinda wrecks the pic.
BUSSE-CS_GREX-GW_BLADE2011d.jpg


Fogo Steak Knife hollow ground variant
Busse_FSK-v_Rowe1.jpg


Meaner (Tweener) St. variant, scalloped down the spine, and sterile (no logo) with olive/tan G-10 AKA "Ghost Camo". I mislabeled this as a "Leaner" in the image name, but it is too thick for that.
BUSSE_MrLr_v-sterile1.jpg

BUSSE_MrLr_v-sterile2.jpg


SHe-v fighter. .187" thick...very light and quick!
Busse-SH-e_LightFighter_variant.jpg


SARGE7 LE #27 & DCBB versions with Chuddy Bear leather
Busse-SARGE7_ChuddyBear4.jpg






 
Jaxx... Mate... Have you considered a Busse dedicated Youtube channel?! You could share a knife a week and have enough material for a few years!! I would watch!!
 
Brother, coming from you, I'm honored to accept that compliment! :) Your collection is incredible and extremely drool-worthy. Seriously, you've put together a fine group of Busse's in a fairly short period of time and I'm glad that you like to show 'em, especially that Hood LE. Ya done good, man! :thumbup:

Thank you for the kind words Alex. I am happy to say that many MANY HOGS from this forum contributed to my meager collection. :thumbup:

Birds Beek Steel Heart's
From Top: SH1, ASH-1LE, BBSHSHII, BBSHSHII (Humpback), BBSHSHII (INFI)
Busse-group-bbshshII-1.jpg


Steel HeartII's
From Top: SHSHII (1/12), Ghost SHSHII (1/6), Snakeskin SHSHII, SHSHII, Nuclear SHSHII
Busse-group-shshII-1.jpg


Old and new Steel Heart's
Busse-group-sh-17.jpg


Straight Handle Battle Mistresses
From Top: SHBMCG, SHBM (1/6), SHBM (1/300), SHBMLE, Snakeskin SHBMLE, SHBMCG, O.I.N.K. SOOEE SHBM
Busse-group-shbm-1.jpg


Old and new Battle Mistresses
Busse-group-bm-11.jpg



Zero Tolerance set
From Top: ZTBM, ZTSH, ZTNO (1/30), ZTNO (mismarked as ZTSH), Ghost ZTNO, ZTSJ, ZTSJ
Busse-group-zt-1.JPG


Snakeskin MOAB
Busse-CS-MOAB-2.JPG


Snakeskin AK-47
Busse-CS-AK-2.JPG
 
Great Googly Moogly!!!!!!

Monte, go ahead and just send those snake skin ak, Shbm, and shshII over here!!!!
 
Status
Not open for further replies.
Back
Top