BCMW Knives in variety steels at high hardness *$25 discount on cpm154 and s35vn*

BluntCut MetalWorks

BluntCut MetalWorks

Knifemaker / Craftsman / Service Provider
Feedback: +8 / =0 / -0
Joined
Apr 28, 2012
Messages
3,465
I've a mixed-bag offer of decent + rough F&F knives for you to consider. All (except 10v) knives are tested experimental and I felt, they are good slicers and would serve you well... otherwise = please return it within 45 days for a full refund.

I didn't F&F grind much during early period of my shoulder recovery. Please look at picture carefully and keep in mind - often picture looks nicer but sometime it's other way, especially for curly/burl wood handle.

* Simple kydex sheath - large teklok compatible.
* please click on image link to view specs and higher resolution.
* discounted price includes shipping fee in U.S. International is extra and risks are on buyer (custom to your addr)
* To buy: post "I'll take it" and pm or email me your paypal account to receive an invoice from me bcmw at flexbiz com (which also is my email addr)

SOLD $187.75 - CPM 10V Paring 68rc stabilized curly KOA handle
http://i.imgur.com/DY7spSd.jpg
DY7spSdl.jpg


$177.75 - CPM154 65rc Hunter stabilized Asian Satinwood Burl handle
http://i.imgur.com/0hLStpX.jpg
0hLStpXl.jpg



SOLD $175.50 - Elmax 64rc stabilized Asian Satinwood Burl handle. It looks a bit rough but it is the only one offer here that ht-ed with CWF HT 1.5 (grain refined+elements gradient+Cr partitioned). This blade was much thicker pre-ht.
http://i.imgur.com/X2jDUKt.jpg
X2jDUKtl.jpg



SOLD $239.50 - CPM M4 64+rc stabilized Curly KOA handle.
http://i.imgur.com/zuVUDaw.jpg
zuVUDawl.jpg


SOLD $127 - S35VN 63.5rc stabilized Buckeye Burl handle.
http://i.imgur.com/KRK1haz.jpg?1
KRK1hazl.jpg


SOLD $88 - W2 67rc stabilized redwood burl handle
http://i.imgur.com/r2NMlJl.jpg
r2NMlJll.jpg
 
Last edited:
Nice
I will take the $175.50 - Elmax 64rc stabilized Asian Satinwood Burl handle.
 
For all that don't know these blades are fantastic! The heat treat makes these blades killer in the kitchen, hard and sharp. Great blades at a very reasonable price.
 
I'll take the M4.

I find your work intriguing. :thumbup:
 
Woodysone - Thanks for good words and support :thumbup:

woodysone said:
For all that don't know these blades are fantastic! The heat treat makes these blades killer in the kitchen, hard and sharp. Great blades at a very reasonable price.
Click to expand...
 
Wow thanks, M4 is yours - Nathan!

It's only logical to explore your intrigue - I will also send you this blade in this video (slightly modified due subsequent tests & 65+rc). Beside, easier to stomach pushing an edge beyond its limits w/o a nice wood handle attached to it :p
[video=youtube_share;_QPEwD5z13g]http://youtu.be/_QPEwD5z13g[/video]

Nathan the Machinist said:
I'll take the M4.

I find your work intriguing. :thumbup:
Click to expand...

Edit to add: Nathan - your mailbox is full. I will forward my draft msg when your mbox has more room. Got your pp acct. Thanks.
 
Last edited:
ouch - that's what I get for working late tonight.
Wanted elmax or M4.
I absolutely love my BCMW 10v at 67. You are in for a treat, VXD! Great wood to boot.

Edit - please make more:D
 
foofie - too bad about working late. Remember... beer Friday afternoon is taken not given :D

I will buy more elmax after done with current round of cwf ht 1.5 Niolox; Becut; RWL34 (piggy back a couple 10V). I've quite a few M4 blanks - will put them through ht 1.2 & 1.5 soon.

foofie said:
ouch - that's what I get for working late tonight.
Wanted elmax or M4.
I absolutely love my BCMW 10v at 67. You are in for a treat, VXD! Great wood to boot.
Click to expand...
 
I will take the last knife the one with redwood scales. I pay by personal and you can ship the knife when my check clears your bank. If you accept my offer please give me your mailing info. My e-mail add. is gmh370601@aol.com. Thanks! GHALE
 
Thanks ghale. W2 w/ redwood burl knife is yours - SPF.
Edit: email sent.
ghale said:
I will take the last knife the one with redwood scales. I pay by personal and you can ship the knife when my check clears your bank. If you accept my offer please give me your mailing info. My e-mail add. is gmh370601@aol.com. Thanks! GHALE
Click to expand...
 
Oh man that W2 shape looks great I'd love to buy a blank or 2 or 3 if you ever have them available again!


sent you an email
 
Last edited:
Thanks Jim!
J. Rosa said:
Great deals. Good looking blades.
Click to expand...

I've a whole bunch of blades in this profile. W2, 52100, CruforgeV and a few other steels. Do you have a grinder? and any preference on hrc range (anyway, easy to temper these steels to lower rc)?
fishface5 said:
Oh man that W2 shape looks great I'd love to buy a blank or 2 or 3 if you ever have them available again!
Click to expand...
 
I missed usps shipping EOD collection today, so packages will head out tomorrow.

*$25 discount on cpm154 and s35vn*
 
You must log in or register to reply here.
Back
Top