Beautiful Burl and 1080 - $65

[jawilder]

I have made around 50 knives and have sold around 30 of them but these will be my first knives to sell on Bladeforums. So I am offering these at way below my usual prices to get my name out there.

The brass pins on these have all been peened to produce a near indestructible bond with West Systems Epoxy as a sealant


1: Stout Field Knife
Handle Material: Stabilized Burl Maple
Blade Material: 1080 heated in digital oven and quenched in Parks 50
Temper: Triple temper @ 400 degrees to produce a 59/60 HR
Overall Length: 8-3/8"
Blade Thickness: 3/16"
Blade Width: 1"
Length of Cutting Edge: 3-7/8"
Medium Scotchbrite Finish
Price without sheath: $65 (US shipping included)

2: Stout Field Knife
Handle Material: Stabilized Burl Maple
Blade Material: 1080 heated in digital oven and quenched in Parks 50
Temper: Triple temper @ 400 degrees to produce a 59/60 HR
Overall Length: 8-3/8"
Blade Thickness: 3/16"
Blade Width: 1"
Length of Cutting Edge: 3-3/4"
Medium Scotchbrite Finish
Price without sheath: $SOLD to dullone (US shipping included)

3: Stout Field Knife
Handle Material: Stabilized Burl Buckeye
Blade Material: 1080 heated in digital oven and quenched in Parks 50
Temper: Triple temper @ 400 degrees to produce a 59/60 HR
Overall Length: 8"
Blade Thickness: 3/16"
Blade Width: 1"
Length of Cutting Edge: 3-3/8"
Medium Scotchbrite Finish
Price without sheath: $65 (US shipping included)






4: Drop Point
This design came out while forging. It is a drop point hunter with an unsharpened clip.
Handle Material: Stabilized Burl Buckeye
Blade Material: 1080 heated in digital oven and quenched in Parks 50
Temper: Triple temper @ 400 degrees to produce a 59/60 HR
Overall Length: 9"
Blade Thickness: 5/32"
Blade Width: 1-1/8"
Length of Cutting Edge: 4-3/8"
Medium Scotchbrite Finish with Forging Marks
Price without sheath: $SPF to TundraR (US shipping included)

5: Three Finger Slicer
Handle Material: Stabilized Flaming Maple
Blade Material: 1080 heated in digital oven and quenched in Parks 50
Temper: Triple temper @ 400 degrees to produce a 59/60 HR
Overall Length: 6"
Blade Thickness: 1/8"
Blade Width: 1-1/4"
Length of Cutting Edge: 2-7/8"
Medium Scotchbrite Finish with Forging Marks
Price without sheath: $65 (US shipping included)

None of these knives include a sheath but I can make a tooled sheath for an extra $30.

If you buy one and it does not meet your satisfaction, send it back and I will replace or refund your money. Of course, this doesn't apply if you use the knife to do things it wasn't designed to do, ie. screwdriver, prybar, throwing, etc.

Paypal: sir_j_wilder(at)hotmail.com

Thanks for looking

 

[RyanW]

Good Luck on the Sales Jason! Nice range to choose from.

 

[jawilder]

Thanks Ryan. I need to get something better than my cell phone to take pics with. I was in a rush because the sun was going down and I wanted to put these up tonight.

 

[dullone]

I'll take #2. Will send off paypal post haste

 

[jawilder]

#2 is SPF to dullone

 

[dullone]

Jason,
As you'll see I included + $30.00 in my payment for a right hand carry tooled lether sheath

 

[jawilder]

Jason,
As you'll see I included + $30.00 in my payment for a right hand carry tooled lether sheath

Got it. Sheath will be made tomorrow. Let me know what color you want.

 

[TundraR]

I'll take #4 if still available. pm me with paypal info.

 

[jawilder]

pm sent

 

[dullone]

Recieved knife #2 and the sheath I ordered with it. I'm VERY pleased with the package and feel it was an exceptional value. The pictures don't do it justice.
Thanks Jason.