I have a wide assortment of knives for sale today.
Terms & Conditions:
1) CONUS sales only
2) Paypal only. Prices include fees and shipping via USPS small flat rate box
3) Buyer must be over 18 and the item must be legal to possess in your locality.
4) Id prefer to sell, but am open to trades with the following caveats:
a. Left-hand tip-up carry required
b. Plain edge required
c. 3.25-4 blade desired. Ill stretch this a bit for the right knife
d. Midrange to upper end production and midtechs in very good or better condition preferred. Particularly interested in Brous, newer ZT models and LEs, and Left Hand CRKs
e. Cash can be added in either direction to balance out a trade.
Enough about terms and conditions, now on to the knives:
Benchmade 581 Barrage - This is a knife Ive tried to warm up to; I just have too many similar knives that I tend to reach for first. Its been carried and used lightly, but never sharpened. It has been de-assisted and I added red and black G10 aftermarket scales and a Ti clip. I removed the safety when I de-assisted it. The black screws from the original scales and clip were replaced with silver. The original scales, bolsters, clip, screws, safety, and axis assist goodies are included. It also includes the box, baggie and everything that came in it. The blade is centered and everything is in excellent condition. Sold
Benchmade HD Hardtail 13100BK I got this second-hand and have not used or sharpened it. It appears to have the factory edge. It does look like it was used very lightly, probably not more than to cut paper, since there are some slight marks on the blade coating. The pictures capture this and, if anything, make it look a bit worse than it is. The rest of the knife is in perfect condition. Operation is incredibly smooth and the blade is centered. Includes box, baggie, and paperwork. $200 shipped & insured
Benchmade 808 Loco - I ended up with two of these and I generally dont do duplicates, so Im keeping the one Ive used and selling this one BNIB. Its been taken out of the box and opened and closed a few times for photos, but its never cut anything or been in a pocket. Blade is centered. $180 shipped & insured
Spyderco Large Lum Chinese Folder - This ones a catch and release; it just wasnt for me. Ive carried it once or twice and used it to open the mail, but thats it. It has the factory edge. I did reverse the clip for LH tip up, but have swapped it back to the original position. There are a couple of very light rub marks on the G10 on the LH side. One slightly odd thing about this knife is that it came to me (new from a Spyderco dealer) with one thin bronze washer and one thick nylon washer in the pivot. This causes the blade to be slightly off center at the pivot, but the tip is pretty well centered. Ive tried to capture this in a photo. Since this is the only one of this model Ive had in-hand, Im not sure if theyre all like this. $90 shipped & insured
Benchmade HK 14705BK-1 I bought this new based on good reports I had read. Unfortunately, it just doesnt fit my hand particularly well, so its going up for sale. It has never been used or even put in my pocket. I took it out of the box, opened and closed it a few times, decided it wasnt for me, took some pictures, and boxed it back up. There are two slight marks on the pocket clip that were there when it came out of the box. The knife is new and is in otherwise perfect condition. Blade is centered. Includes box, baggie, and paperwork. SOLD
The next group of knives, a CRKT Ripple, Kershaw Leek, and Kershaw Brawler may be purchased only with one of the above knives just to make shipping worthwhile. None of them include boxes. I am asking $15 each when purchased with one of the above knives. Alternately, I would sell all three of them as a group for $45 shipped.
Kershaw Leek Lightly used. Has been stropped, but the edge has a couple of slight rolls in it at the moment. I removed the safety and now I cant find it, so its not included. Blade is centered.
CRKT Ripple This is the aluminum liner-lock version. Its been carried, but used very little. It has the factory edge and appears almost new. The blade is off center but does not rub.
Kershaw Brawler Another light user. Has the factory edge and the blade is centered.
Terms & Conditions:
1) CONUS sales only
2) Paypal only. Prices include fees and shipping via USPS small flat rate box
3) Buyer must be over 18 and the item must be legal to possess in your locality.
4) Id prefer to sell, but am open to trades with the following caveats:
a. Left-hand tip-up carry required
b. Plain edge required
c. 3.25-4 blade desired. Ill stretch this a bit for the right knife
d. Midrange to upper end production and midtechs in very good or better condition preferred. Particularly interested in Brous, newer ZT models and LEs, and Left Hand CRKs
e. Cash can be added in either direction to balance out a trade.
Enough about terms and conditions, now on to the knives:
Benchmade 581 Barrage - This is a knife Ive tried to warm up to; I just have too many similar knives that I tend to reach for first. Its been carried and used lightly, but never sharpened. It has been de-assisted and I added red and black G10 aftermarket scales and a Ti clip. I removed the safety when I de-assisted it. The black screws from the original scales and clip were replaced with silver. The original scales, bolsters, clip, screws, safety, and axis assist goodies are included. It also includes the box, baggie and everything that came in it. The blade is centered and everything is in excellent condition. Sold
Benchmade HD Hardtail 13100BK I got this second-hand and have not used or sharpened it. It appears to have the factory edge. It does look like it was used very lightly, probably not more than to cut paper, since there are some slight marks on the blade coating. The pictures capture this and, if anything, make it look a bit worse than it is. The rest of the knife is in perfect condition. Operation is incredibly smooth and the blade is centered. Includes box, baggie, and paperwork. $200 shipped & insured
Benchmade 808 Loco - I ended up with two of these and I generally dont do duplicates, so Im keeping the one Ive used and selling this one BNIB. Its been taken out of the box and opened and closed a few times for photos, but its never cut anything or been in a pocket. Blade is centered. $180 shipped & insured
Spyderco Large Lum Chinese Folder - This ones a catch and release; it just wasnt for me. Ive carried it once or twice and used it to open the mail, but thats it. It has the factory edge. I did reverse the clip for LH tip up, but have swapped it back to the original position. There are a couple of very light rub marks on the G10 on the LH side. One slightly odd thing about this knife is that it came to me (new from a Spyderco dealer) with one thin bronze washer and one thick nylon washer in the pivot. This causes the blade to be slightly off center at the pivot, but the tip is pretty well centered. Ive tried to capture this in a photo. Since this is the only one of this model Ive had in-hand, Im not sure if theyre all like this. $90 shipped & insured
Benchmade HK 14705BK-1 I bought this new based on good reports I had read. Unfortunately, it just doesnt fit my hand particularly well, so its going up for sale. It has never been used or even put in my pocket. I took it out of the box, opened and closed it a few times, decided it wasnt for me, took some pictures, and boxed it back up. There are two slight marks on the pocket clip that were there when it came out of the box. The knife is new and is in otherwise perfect condition. Blade is centered. Includes box, baggie, and paperwork. SOLD
The next group of knives, a CRKT Ripple, Kershaw Leek, and Kershaw Brawler may be purchased only with one of the above knives just to make shipping worthwhile. None of them include boxes. I am asking $15 each when purchased with one of the above knives. Alternately, I would sell all three of them as a group for $45 shipped.
Kershaw Leek Lightly used. Has been stropped, but the edge has a couple of slight rolls in it at the moment. I removed the safety and now I cant find it, so its not included. Blade is centered.
CRKT Ripple This is the aluminum liner-lock version. Its been carried, but used very little. It has the factory edge and appears almost new. The blade is off center but does not rub.
Kershaw Brawler Another light user. Has the factory edge and the blade is centered.
Last edited:
