ea42
Knifemaker / Craftsman / Service Provider
- Joined
- Jan 1, 2006
- Messages
- 4,018
The knives are finally ordered!
We have a total of 56 knives ordered, with the final tally below:
ea42- 2 knives
Nukemkb- 1
Totally Judy- 1(purple)
Peregrin- 1
Old Physics- 1
Thomason- 1
Sunburst- 1
yablanowitz- 1
longbeachguy- 1
fewpop- 1
KimberComp- 1
ParaGlock- 1
Peter E Ryt- 1
cockroachfarm- 1
rbmcmjr- 1
samhell- 1
rosconey2- 1
GigOne- 1
Guyon- 1
Lanza- 1
nifrand- 1
shilohreb- 1
airyq2- 1
gus (aka bastid) - 1
Amos Iron Wolf- 1
T.Erdelyi- 1
peter78- 1
synghyn- 1
WA Martin- 1
Mick57- 1
Rusty1- 1
sithlord 1968- 1
freezergeezer- 1
glennbad- 1
abnwag- 1
artdeg- 1
Beaver- 1
knowtracks- 1
augustus88- 1
Kerry Hampton- 1
Zip7- 1
roughedges- 1
cmd- 1
waynorth- 1
saberman- 1
colog- 1
mikeymoto- 2
bluejaunte- 1
Jason Richmond- 1
arathol- 1
mp510- 1
buckman#10- 1
pyrguy- 1
madcap_magician- 1
jacknife- 1
Here's also a little mock-up of the etch. The final product may have a slightly different font, but not by much:
[/IMG]
Target date for completion is still very much up in the air, sometime in October seems likely but it could be a month either way due to the fact that they're super busy, and mammoth isn't the easiest thing in the world to work with. I'll keep you updated as things progress and the date becomes more focused. I'll also post mockups of the scroll work once that becomes available. This should be the final thread until the knives arrive, so feel free to post any comments, questions, gripes, or small talk to keep things interesting. Gus, if you could do us the honor of making this a sticky one more time, I'd really appreciate it!
Eric


ea42- 2 knives
Nukemkb- 1
Totally Judy- 1(purple)
Peregrin- 1
Old Physics- 1
Thomason- 1
Sunburst- 1
yablanowitz- 1
longbeachguy- 1
fewpop- 1
KimberComp- 1
ParaGlock- 1
Peter E Ryt- 1
cockroachfarm- 1
rbmcmjr- 1
samhell- 1
rosconey2- 1
GigOne- 1
Guyon- 1
Lanza- 1
nifrand- 1
shilohreb- 1
airyq2- 1
gus (aka bastid) - 1
Amos Iron Wolf- 1
T.Erdelyi- 1
peter78- 1
synghyn- 1
WA Martin- 1
Mick57- 1
Rusty1- 1
sithlord 1968- 1
freezergeezer- 1
glennbad- 1
abnwag- 1
artdeg- 1
Beaver- 1
knowtracks- 1
augustus88- 1
Kerry Hampton- 1
Zip7- 1
roughedges- 1
cmd- 1
waynorth- 1
saberman- 1
colog- 1
mikeymoto- 2
bluejaunte- 1
Jason Richmond- 1
arathol- 1
mp510- 1
buckman#10- 1
pyrguy- 1
madcap_magician- 1
jacknife- 1
Here's also a little mock-up of the etch. The final product may have a slightly different font, but not by much:

Target date for completion is still very much up in the air, sometime in October seems likely but it could be a month either way due to the fact that they're super busy, and mammoth isn't the easiest thing in the world to work with. I'll keep you updated as things progress and the date becomes more focused. I'll also post mockups of the scroll work once that becomes available. This should be the final thread until the knives arrive, so feel free to post any comments, questions, gripes, or small talk to keep things interesting. Gus, if you could do us the honor of making this a sticky one more time, I'd really appreciate it!
Eric